Dizelski viličarji

Kalmar DCG120-6

Stanje: dober (rabljeno), številka stroja/vozila: 2646, Leto izdelave: 2013, nosilnost: 12.000 kg, dvižna višina: 4.000 mm, tip droga: dupleks, širina nosilnega okvirja vilic: 200 mm, dolžina vilic: 2.400 mm, skupna dolžina: 4.650 mm, skupna širina: 2.500 mm, obratovalna teža: 16.840 kg, dodatne značilnosti opreme: Dual tread, Weight system, Warning triangle, Centralized greasing system, Oprema: osvetlitev, Kalmar DCG120-6 od Uniktruck Tip kolesa – pogonsko kolo: Supersoft Tip kolesa – krmilno kolo: Supersoft Velikost kolesa – pogonsko kolo: 12.00-20 Lhodpfxeyuhqle Aaijl Velikost kolesa – krmilno kolo: 12.00-20

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Max. premer obdelovanca: 400 mm Max. dolžina obdelovanca: 300 mm Max. premer vpenjalne glave: 500 mm Lhedpfjxy Ac Ssx Aaisl Obodni premer: 520 mm Pomik osi X: 1.110 mm Pomik osi Z: 595 mm Glavno vreteno: moč (pri 40 / 100 % ED): 47/34 kW Glavno vreteno: navor (pri 40 / 100 % ED): 600 Nm Glavno vreteno: največje število vrt./min: 2.850 Krmilje: Fanuc 31i Brez Y osi

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 17.718 h, nosilnost: 12.000 kg, dvižna višina: 3.220 mm, vrsta goriva: dizel, tip droga: simpleks, gradbena višina: 3.250 mm, širina nosilnega okvirja vilic: 2.750 mm, dolžina vilic: 2.200 mm, lastna masa: 16.500 kg, skupna dolžina: 4.600 mm, vrsta pogona: Diesel, gradbena širina: 2.750 mm, Diesel forklift Load center: 600 mm Fork width: 200 mm Fork thickness: 65 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 12.00-20 Lhedpfju Uwcbox Aaijl Rear tires type: Superelastic Rear tires size: 12.00-20 Description: Alongside this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders available in our warehouses in Hamburg and Gdansk. Visit our homepage – sago-online. Leasing and financing at attractive conditions are always possible for us. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with comprehensive advice on this DCG120-6. P.S.: Our forklift master workshop specializes in repair, maintenance, reconditioning, and custom builds for forklifts from 8 tons upwards. We are also happy to place your vehicle with us for consignment sale. Sideshift, Fork positioner, Fork positioner opening range: 575 / 2620 mm Heater, Full cabin,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 21.869 h, nosilnost: 12.000 kg, dvižna višina: 3.300 mm, prosto dvigovanje: 1.650 mm, vrsta goriva: dizel, tip droga: dupleks, gradbena višina: 3.300 mm, širina nosilnega okvirja vilic: 2.500 mm, dolžina vilic: 1.800 mm, lastna masa: 19.900 kg, skupna dolžina: 4.700 mm, vrsta pogona: Diesel, gradbena širina: 2.600 mm, Dizelski viličar Težiščna točka: 600 mm Širina vilic: 200 mm Lhjdpszg Rb Nefx Aaiel Debelina vilic: 75 mm Tip droga: Duplex Stanje: Pripravljen za uporabo in popolnoma delujoč Tehnično stanje: zelo dobro Sprednje pnevmatike tip: super elastične Sprednje pnevmatike velikost: 12.00-20 Zadnje pnevmatike tip: super elastične Zadnje pnevmatike velikost: 12.00-20 Opis: Poleg tega modela Kalmar imamo na zalogi v Hamburgu in Gdansku še približno 200 težkih viličarjev, kompaktnih viličarjev, viličarjev in bočnih viličarjev. Obiščite našo spletno stran - sago-online. Možnost najema s kasnejšim odkupom ter financiranja po ugodnih pogojih je vedno mogoča. Z veseljem odkupimo tudi vaše rabljeno vozilo, tudi če pri nas ne kupite novega. Naš lastnik, gospod Peter Sawitzki, vam bo z veseljem svetoval v zvezi s tem DCG120-6. P.S.: Naša mojstrska delavnica za viličarje je specializirana za popravila, vzdrževanje, prenovo in izdelavo specialnih viličarjev nad 8 ton. Z veseljem vaše vozilo ponudimo tudi v komisijski prodaji pri nas. Bočni pomik vilic, nastavljiv razmik vilic, Nastavljiv razmik vilic - razpon odpiranja: 625 / 2275 mm Gretje, popolna kabina, polni prosti dvig,

Stanje: rabljeno, Leto izdelave: 1982, Tehnične podrobnosti: Premer planske plošče: 2600 mm Lsdpfjwtctyex Aaiohl Premer struženja nad podporo: 2500 mm Dolžina struženja: - mm Razdalja med konicama: 1600 mm Premer struženja nad ležiščem: 2900 mm Vretensko izvrtina: 100 mm Število vrtljajev: prestave – obr./min Področje pomika: vzdolžno struženje 0,12–31,5 mm/min, čelno struženje 0,12–45 mm/min Dolžina vodil postelje: 2900 mm Največja teža obdelovanca med konicama: 400.000 kg Skupna potrebna moč: 45 kW Skupna teža stroja (vsi sestavni deli skupaj): pribl. 29,0 t Dimenzije stroja D x Š x V: 5,2 x 5,0 x 3,1 m 3-osni merilni sistem z digitalnim prikazovalnikom RSF-Elektronik Upravna plošča Hladilna enota za krmilno omaro Rittal

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H008E03536T, Leto izdelave: 2019, obratovalne ure: 9.670 h, nosilnost: 30.000 kg, dvižna višina: 4.000 mm, prosto dvigovanje: 1.870 mm, vrsta goriva: dizel, tip droga: dupleks, gradbena višina: 3.900 mm, moč: 194 kW (263,77 KM), dolžina vilic: 2.440 mm, lastna masa: 44.280 kg, vrsta pogona: Diesel, Heavy Duty Forklift Truck – Diesel Chassis number: H008E03536T Load center: 900 mm Fork width: 300 mm Fork thickness: 105 mm Mast type: Duplex Transmission: ZF WG211 Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Pneumatic Front tires size: 16.00-25 Front tires condition: 20 – 40% Rear tires type: Pneumatic Rear tires size: 16.00-25 Rear tires condition: 60 – 80% Description: In addition to this MAKE – MODEL, we have approximately 150 heavy duty forklifts, container handlers, reach stackers, forklifts, and terminal tractors in stock at our Oldenburg warehouse. Visit our website – hinrichs-Forklifts. Leasing, hire purchase and financing at fair conditions are always possible for us. We are also happy to purchase your used machine, even if you do not buy a vehicle from us. Please contact me, Marco Levermann, for comprehensive advice on this MAKE – MODEL. Incidentally, our forklift specialist workshop is focused on the repair and maintenance of heavy equipment from 8 tons upwards. We are also happy to offer your vehicle for sale on commission at our premises. Side shifter, fork positioner, Full cabin, air conditioning, electric cab lifting Lsdpexzv Htsfx Aaiohl

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06007153/001, skupna višina: 6.050 mm, skupna širina: 3.380 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 210 kg, gradbena višina: 6.050 mm, vhodna napetost: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of manufacture: 2006 Total Load: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available on request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (The height of the Kardex can be adjusted to the available height) Power supply: 3/N/PE 400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed. More or heavier trays available on request. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - One access opening with sliding doors for safety of personnel and stored goods - Control C2000, with B/W OP2000 display Ledjxq Tbtspfx Aaiohl - LED anti-glare lighting above the access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest order picking - Distances can be set in 25 mm increments by arranging the support profile, a prerequisite for high-density storage - Weight management controls the tray load - Including light pointer Price: On request via email only Price: excl. VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, stružna dolžina: 700 mm, potovalna razdalja osi X: 205 mm, pomik po osi Z: 700 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.800 mm, skupna dolžina: 6.000 mm, skupna širina: 3.900 mm, skupna masa: 9.800 kg, Complete machining with double spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg load capacity Chip conveyor Lhodpsyn Em Rsfx Aaijl Paper band filtration system with pressure tank Max. turning diameter: 400mm X-axis travel: 205mm Z-axis travel: 700mm Spindle bore: 62mm Spindle speed: 6000 RPM Spindle power: 22kW Sub-spindle speed: 6000 RPM Sub-spindle through hole: 62mm Sub-spindle power: 15kW Tool changer: 16 positions Driven tool speed: 6000 RPM Lower turret positions: 16 Driven tool speed: 6000 RPM Driven tool power: 7kW Chip conveyor: yes Tool Eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is provided in good faith, however, accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract terms. We recommend that you verify all key details yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning machine equipped with a FANUC 31i control, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium three-turret configuration: Turrets 1 and 2 each offer X, Z, and Y axes, while Turret 3 is dedicated to operations on the counter spindle. All three disk turrets are fitted with 10 stations each and support driven tools up to 6,000 rpm, allowing for highly flexible complete machining operations. With a gantry loader, conveyor belt, C-axis on both main and counter spindles, and powerful spindle drives, this machine is especially suitable for productive series manufacturing of complex turned and milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disk turrets Bar capacity: 65 mm Machine bed: vertically arranged grey cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Z-axis (counter spindle): 700 mm travel Rapid traverse Z-axis: 50 m/min Tool carriers / Turrets Equipped with 3 disk turrets, each with 10 stations. Tool system for 10 stations: DIN 69880 cylindrical shank – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (as per documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Dedicated exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment as per documentation: - Gantry loader system with numerically controlled Z-axis - Workpiece unloading from main or counter spindle to conveyor belt - Remnant part removal from the main spindle into remnant container Gantry loader: Traverse speed: 100 m/min Traverse range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Delivery rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Delivery rate: 19 l/min Cooling unit power: 13 kW Coolant system: Ledpfx Aoy Tmhzoaishl Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 2.350 mm, hitrost pomika os X: 13.000 m/min, hitrost podajanja osi Y: 13.000 m/min, hitrost podajanja os Z: 13.000 m/min, skupna dolžina: 12.000 mm, skupna višina: 4.800 mm, širina mize: 2.000 mm, skupna širina: 6.800 mm, dolžina mize: 2.500 mm, zmogljivost vrtanja: 180 mm, vrtljajska hitrost (min.): 2.000 obr/min, dolžina pomika os W: 1.000 mm, Table-type Boring Mill Juaristi - TS5 MACH-ID 9610 Manufacturer: Juaristi Model: TS5 Control: HeidenHain iTNC530 Year of manufacture: 2009 Coolant through spindle: 20 bar Paper filter system Tool changer (ATC) with 60 positions Spindle extension: L = 550 mm Full B-axis 360,000° with ROD 880C Table load capacity: 28,000 kg X-axis travel: 5,000 mm Y-axis travel: 3,500 mm Z-axis travel: 2,350 mm W-axis travel: 1,000 mm Table length: 2,500 mm Table width: 2,000 mm Table load: 28,000 kg Spindle speed: 2,000 rpm Power: 51 kW Tool holder: 180 ISO50 ISO/BT/MK Feed rate X-axis: 13,000 mm/min Ledpoy Hq Dyjfx Aaijhl Feed rate Y-axis: 13,000 mm/min Feed rate Z-axis: 13,000 mm/min Feed rate W-axis: 13,000 mm/min Tool changer: 60 positions ICS (internal coolant supply): 20 bar Number of controlled axes: 5 Length: 12,000 mm Width: 6,800 mm Height: 4,800 mm Weight: 44,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend that you verify all critical details.