Avtomatski stroj za prebijanje - dvojni stolpec

KAISER KSTU 1600 - 15 - 3 PSR

Stanje: skoraj kot novo (rabljeno), Rated load: 2,500 kN Threshold value: Measurement starts at approx. 3% of rated load (approx. 75 kN) Resolution: 10 kN Measurement accuracy: +/-0.5% of full-scale reading (FS) Non-linearity: +/-0.3% FS Non-repeatability: +/-0.1% FS Temperature range: 0°C to 70°C Temperature influence On FS output: +/-0.001% FS/°C On zero-load output: No influence (automatic zero calibration) Overload capacity: 50% of rated load (3,750 kN) Measurement speed: Three measurements per second Operating modes: Peak value or continuous measurement Strokes per minute: Single-stroke device, automatic zeroing after each stroke Power supply: Standard 9V block battery Lsdpfjfpwmpsx Aamshi Approx. 30 hours of continuous operation Device features a battery replacement indicator Dimensions: Approx. 185mm (L) x 200mm (W), height approx. 127mm Height (exact): 5.0000 +/-0.0002" Weight: Approx. 13 kg including carrying case With analog output

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), 3D coordinate measuring machine in bridge design * Floor-mounted installation on steel feet * Height from floor to measuring plate: 600 mm Measuring range * X 3,200 , Y 1,600 , Z 1,800 [mm] Lhodpfehlqknjx Aamoi Measuring uncertainty * 30 + L/40, max. 60 [µm] at L=3,000 mm Dynamics * 3D traversing speed 220 mm/sec * 3D acceleration 1000 mm/sec² Probe system * Renishaw PHS / alternatively PH10M * Renishaw TP20 + 2 modules Control unit * Pantec Eagle Pro Wireless control unit * Manual control HT400 Software * POLYWORKS Inspector Optional technologies * Probe change rack MCR20 * Probe change rack ACR3 * Optical scanner KREON or NIKON Supplier services * Transport, commissioning, calibration, final acceptance Warranty * 12 months from acceptance date

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150 583, skupna višina: 3.975 mm, nastavitev hidravličnega cilindra: 125 mm, vgradna višina: 410 mm, višina mize: 1.220 mm, skupna širina: 2.725 mm, skupna dolžina: 3.510 mm, dolžina mize: 1.500 mm, širina mize: 1.200 mm, stiskalna sila: 200 t, višina krmilne omare: 2.200 mm, dolžina elektro omare: 340 mm, širina krmilne omare: 600 mm, vrsta vhodnega toka: trifazni, razmak između stupova: 900 mm, razdalja med stranskimi nosilci: 900 mm, razdalja med stojali: 1.520 mm, skupna masa: 3.700 kg, leto zadnje generalne obnove: 2025, ATTENTION: The machine sustained transport damage and will undergo a complete mechanical and electrical overhaul before delivery in 2025/2026. Lodpfx Ajw H Arvoamshi Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Slide adjustment: 125 mm Strokes per minute: 30 - 180 Die installation height: 410 mm Table dimensions: 1500 x 1200 mm (The press will be delivered with a new table plate, T-slot design can be freely selected) Slide dimensions: 1500 x 1000 mm Control system: SIEMENS S7 1500 series, year of manufacture: 2020

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Pressing force: 2,000 kN Table area: 2,300 x 1,100 mm (W x D) Die opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Side passage: 740 mm Installation height: 550 mm (stroke bottom, adjustment top) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Design features: • Control system Siemens + Beckhoff • 8-point sliding guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Control system Siemens + Beckhoff • Beckhoff panel for visualization • T-slots in table and ram (28mm, 300mm spacing) • Vibration-damping machine feet • 4 pcs. tool clamps + 4 pcs. cam outputs • Ram with 20mm wide central groove • Hydraulic tool clamping device on table and ram • Hydraulic roll blocks for tool change Strip feeding line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 – S Load capacity: 5,000 kg Strip width: 100 - 600 mm Expanding range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Back support disc and 3 pcs. detachable guide arms at front • Hydraulically operated and driven hold-down roller, lateral adjustment via handwheel • Loading saddle (stationary, decoiler moves hydraulically), lift height 770 mm with 4 pcs. limiting rods Straightening machine Type: RMBMZ 50.600 UF Strip width: 40 - 600 mm Strip thickness: 0.5 – 4.0 mm Straightenable cross-section: 1,200 mm² Number of rollers: 9 pcs. Straightening roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Design features: • Rollers hardened, ground and hard-chrome plated • Drive of lower straightening rollers and feed rollers by gear transmission • Motorized adjustment of roller stand via motors, setting accuracy 1/100 mm, values can be saved • Upper rollers can be lifted by 100mm • Feed roller pneumatically liftable • Lateral strip guide at inlet with handwheel and leadscrew • Exit roller basket and loop bridge • Loop control by ultrasonic sensor • Infeed assist, hydraulically operated, consisting of table with extendable tongue and upper bending roller Roll feed Strip width: max. 600 mm Design features: • Rollers hardened, ground and chrome plated • Driven by gear motor • Upper roller can be hydraulically lifted • Height adjustment hydraulic • Lateral strip guide at the infeed with handwheel • Roller basket Further features: • Pneumatically swiveling loop bridge between straightening machine and feeder • Safety fence around the complete system • Decoiler and straightener mounted on a common base frame • Various spare rollers for the straightener Lhedpfx Asv T Anlsamji The complete system is still powered on and can be inspected at the seller's site!!

Stanje: novo, Leto izdelave: 2024, Pressure 75 t Stroke 8–80 mm Strokes per minute 80–200 spm Ram adjustment 70 mm Table area 900x600 mm Ram area 900x470 mm Table through-hole 450x180 mm Clearance between uprights (lateral) 500x350 mm Passage between columns (lateral) 788 mm Total power requirement 10 kW Machine weight approx. 10 t Space requirement approx. WxDxH 1600x1200x2800 mm Oil circulation lubrication Adjustable hydraulic overload protection Ram counterbalance cylinder Adjustable press force monitoring Thermal bearing point monitoring Pneumatic clutch-brake combination Pneumatic safety door, front Light curtain safety operation, front Swing door, rear 8x programmable die protection circuits 8x programmable electronic cams Conveyor control Distribution box 400V/230V Work area LED lighting Lhjdjvfxl Ropfx Aamoi Interface for coil line Mechanical roll block rails in table Elmea coil line, consisting of: - Elmea decoiler 3 t - Elmea straightener 300x3 mm - Elmea roller feeder 300x3 mm Safety fence system for coil line

Stanje: rabljeno, Leto izdelave: 1980, Pressing force 25 t Stroke rate 1,500 spm Total power requirement 20 kW O F F E R We are pleased to offer you, subject to prior sale and error, the following from stock: Ledpfx Asvu E Iqsamohi BRUDERER High-Speed Automatic Punching Press with Mass Counterbalance Model: BSTA 25 Year: 1980 _____ Nominal press force: 25 t Stroke rate min. – max.: 100 – 800 / 950 / 1075 / 1240 / 1350 / 1500 spm Adjustable stroke lengths: 13 / 16 / 19 / 25 / 32 / 38 mm Ram adjustment: 51 mm Table size: 530 x 530 mm Ram face (upper): approx. 360 x 430 mm Die height: 230 - 281 mm Front opening for tool change: approx. 540 mm Adjustable strip entry height: 80 – 150 mm Max. strip width / left side opening: 202 / 203 mm Main drive approx.: 18 kW Total connected load approx.: 20 kW - 380 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • BRUDERER system for complete mass counterbalancing by means of a transverse eccentric shaft and adjustable lever system • BRUDERER strip feed unit, left-side mounted, type BBV 202/120, adjustable stroke, height-adjustable • Horizontal decoiler, tension-controlled • Continuous stroke and single stroke selectable, inching operation, parts counter, air blow-off device • Separate floor-standing control cabinet and electrical cabinet, vibration dampers • Large, sophisticated sound enclosure (disassembled) Condition: Very good! Previously used for precision electronics connectors, regularly serviced by BRUDERER! A video of the machine will be available shortly—please click here soon: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice We look forward to your order. Further mechanical and hydraulic presses and other machine tools in stock – please check our current inventory on our website: geiger-

Stanje: rabljeno, Leto izdelave: 1973, številka stroja/vozila: 104530, Outreach: 350 mm Lhsdpfx Aaeddhw Ssmoi Table size: 690 x 840 mm Pass-through hole in table: 160 mm Ø Ram surface: 450 x 600 mm Ram adjustment: 80 mm Stroke adjustment: 8 - 100 mm Strokes per minute: 60 /min Drive motor: 380 V, 5.5 kW Required space: 1850 x 1850 x 2650 mm Weight: 6800 kg

Stanje: rabljeno, Leto izdelave: 1974, številka stroja/vozila: 00-0438-01, Sheet width: 100 - 500 mm Coil weight: approx. 6 t Coil inner diameter: 400 - 500 mm Ljdpfxjh Ra Spe Aamehi Coil outer diameter: 1500 mm Max. sheet thickness: 0.8 - 3.5 mm Feed length: max. 10 m Feeding speed: max. 75 m/min Expansion range: 360 - 420, 460 - 520 mm Lift height: 550 mm Lifting table capacity: 7,500 kp Machine weight approx.: ukb, t Space requirement approx.: 3.4 x 1.7 x 2.5 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Širina traku: 100 - 800 mm Debelina traku jeklo (aluminij): 0,8 - 4 (7) mm Referenčni material (vlečna trdnost): 600 N/mm² Teža koluta: maks. 13 t Zunanji premer koluta: maks. 2.000 mm Lhsdsrnq Ufspfx Aamji Leto izdelave: 2001

Stanje: rabljeno, Leto izdelave: 2001, številka stroja/vozila: 150204, Pressing force: 100 t Ram stroke: 300 mm Ram adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Distance between uprights L-R: 2,020 mm Distance between uprights lateral: 620 mm Lhodsvmfznspfx Aamsi Table clamping area approx.: 2,000 x 1,000 mm Ram clamping area approx.: 2,000 x 900 mm Pass-through opening in table: 1,700 x 300 mm Strokes per minute: 10 - 50 min⁻¹ Table height above floor: 1,200 mm Power requirement: 39 kW Height above floor approx.: 4,400 mm Dimensions LxWxH: 5,166 x 2,500 x 4,400 mm Machine weight approx.: 38 t Standard features Electric overload protection SIEMENS S7 control Two-hand operation Optional equipment Automation Schleicher straightening machine (650 mm, max. 2.0 mm) Wanzke decoiler (max. 6t) Helmerding feeder (600 mm, 0.6 - 6.0 mm)