Stroj za plamensko rezanje

KAI TEC Plasmaschneidanlage 1500x3000

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface Bdedpfsrn Riqox Afqek

Stanje: rabljeno, Suspended Crane Runway DEMAG Crane System Type KBK 1 Year of manufacture: approx. 2000 Bodohrkrtepfx Afqjdk Single-girder monorail system with single-girder crane bridge Light crane system made from KBK modular system profiles Load capacity: 125 kg Span: 5 meters Distance between longitudinal running rails: 4.1 meters Total length of longitudinal girder: 12 meters Cross traverse profile = KBK1 Longitudinal running rail profile = KBK1 Consisting of: 29 meters of KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 trolley for crane suspension 2 double trolleys for longitudinal running rails 10 screw clamps for crane suspension or ceiling mounting (without beam clamps) 6 end caps suitable for KBK1 running rails

Stanje: novo, Cutting diameter: 300 mm Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Bedpjfg E H Tofx Afqedk Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Manual vice with quick-clamping system. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating instructions.

Stanje: dober (rabljeno), Leto izdelave: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Only approx. 1,000 spindle hours since spindle replacement Total machine hours: approx. 20,500 2024: Spindle replaced (18,000 rpm) 2024: Geometry re-calibrated Travel paths: X 650 / Y 850 / Z 500 mm Rotary table: 360° continuous Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle taper: HSK-A63 The machine is equipped as follows: - 60-position tool changer - ICS (20 bar) with belt filter system - Air through spindle - Kessler table, 500 mm diameter - Infrared part measurement – 3D probe - Tool measurement via BLUM laser - Rotational viewing window - POS DCM collision module - Mobile electronic handwheel - Oil mist extraction - Heidenhain linear measuring systems X, Y, Z - Purge air for all linear measuring systems - Active air-to-air electrical cabinet cooler - Active cooling for 4th & 5th axis, controlled - Network and USB connection - Controlled spindle chiller - Heidenhain rotary measuring system - POS contour monitoring - External hinged belt chip conveyor - Coolant pump at head, controlled via M functions - Pump for chip rinse system - Chip rinsing equipment - Machine status indicator - Air at spindle - Oil/coolant separator, electromechanical - Automatic coolant level monitoring - 3-fold media connection at table center - Hydraulic unit incl. control via M function Connected load: 60 kVA Bsdpfx Afowz I Acjqjdk Installation dimensions: W 4800 / D 4600 / H 3000 mm + ICS unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run company. In 2024, the spindle was replaced and geometry was calibrated (guides repaired and aligned). Since then, the machine has seen only limited use.

Stanje: novo, Leto izdelave: 2024, Delovna širina: 380 mm Delovna višina: 150 mm 1. Sklop, rotorska skupina: Skupina 5 nihajnih rotorskih ščetk, Ø 115 mm, vsaka z motorjem 3 kW 2. Sklop, ščetka: Scotch Brite Hard / premer 210 mm, variabilni pogon Nastavitev višine: ročni ročaj Prikaz višine: mehanski števec Hitrost podajanja: 4 - 12 m/min Moč pogonskega motorja: 0,37 kW Vakuumska preproga: da Dolžina stroja: 1400 mm Širina stroja: 900 mm Teža: 500 kg Bdedpotnf Rrofx Afqjk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Bsdpswxw S Iofx Afqjdk Available immediately! Can be tested under power.

Stanje: rabljeno, Laser stereo camera Factory-refurbished with warranty The Leica BLK3D is a photo-based measurement solution. Every captured photo serves as a complete measurement record, containing height, width, and depth measurements. Measurements can be taken at any time—either instantly on site using the handheld BLK3D Imager or later with the BLK3D desktop software. The BLK3D device integrates a calibrated stereo camera, measurement sensors, software, and built-in edge detection features to perform in-image measurements with professional-grade accuracy. Each captured image is a comprehensive and precise 3D measurement record. Stereo camera: - Field of view: 80° - Focal length: 4 mm - Aperture: F 3.0 - 2 x synchronous LED flash Intuitive Android operating system 65 GB memory; storage for thousands of digital images Fast data transfer via USB-C and Wi-Fi Rechargeable battery lasts all day Bedov Ntbbopfx Afqjdk Dimensions: 180 x 77 x 27 mm Weight: 480 g Laser accuracy Accuracy under favorable conditions: +/- 1 mm Range under favorable conditions: 250 m Availability: short-term Stock location: Hochheim Includes tripod adapter Includes carrying case Includes DST 360 set, including DST 360 adapter, TRI120 tripod, shoulder strap, and carrying case

Leto izdelave: 2017, Stanje: pripravljen za uporabo (rabljen), Laser power: 10kW (10,000W), Working area: 3000mm x 1500mm, Maximum material thickness: Mild steel: 25mm, Stainless steel: 30mm, Aluminium: 30mm, Copper: 12mm, Brass: 15mm. Positioning speed: 120m/min, Positioning accuracy: +/-0.05mm, Maximum workpiece weight: 1,100kg. Machine dimensions (X/Y/Z): approx. 9500mm x 3500mm x 3500mm, Extraction unit dimensions (X/Y/Z): approx. 1500mm x 1500mm x 4000mm, Machine weight: approx. 12,000kg, Operating hours: approx. 17,000h. Documentation available. On-site inspection possible. Expected to be available from June 2025. Bdodpfx Ajvyiqgjfqek

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system 3 identical vertical carousels available External dimensions: Total height: 6,500 mm Total width: 3,670 mm Total depth: 1,560 mm 46 carriers, each with a payload of 305 kg Clear usable dimensions per carrier: Height: 210 mm Width: 3,050 mm Depth: 520 mm Chain pitch: 254 mm Additionally included: 46 intermediate shelves to halve the usable height Total payload up to 14,200 kg Retractable shelf positioned 1,000 mm above finished floor level, with stainless steel worktop Bodpfx Aorw A Eisfqjdk Color: GREY / DARK GREY, surfaces cleaned, signs of use possible Drive motor power: 1 x 5.5 kW / 400 volts Subject to errors, technical changes, and detail deviations from the photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8044000703A, Siemens 840 D control Country of manufacture: EU – Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip tray) 4228x2260x1775 mm (with chip conveyor) Net machine weight: 3400 kg TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Working capacity Swing over bed: 330 mm Swing over cross slide (X): 260 mm Maximum turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Centre height: 190 mm Distance between centres: 581 mm Feed drive Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C-axis with Siemens control Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing diameter: 100 mm Spindle bore: Ø 74.3 mm Bar capacity: 51 mm Main drive with Siemens control Drive power (40% / 100% duty cycle): 16.5 / 11 kW Bdedpfx Aow T Sqyofqsk Torque (40% / 100% duty cycle): 166.5 / 112 Nm Max speed: 5,000 rpm Tool turret Number of tool stations: 12 Tool holder: DIN69880 (VDI 3425) Turret disc diameter: 30 mm Tool change (with locking): 0.95 sec Tool change (without locking): 0.4 sec Powered turret with Siemens control Number of driven tools: 12 Drive power (40% duty cycle) at 4000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Automatic movement: 396 mm Quill bore: flange Maximum quill axial force: 400 daN Hydraulic unit Tank capacity: 50 L Maximum pressure: 50 bar Cooling system Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow at 5 bar: 30 L/min Electrical connection Maximum power: 21 kVA Current: 400V Frequency: 50–60 Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental conditions Ambient temperature: +15 to +35°C Maximum humidity: 75% Unless otherwise stated, the technical information is provided without guarantee of accuracy or completeness.