Olje / voda ločilo Aquamat CF 38

KAESER CF38

Leto izdelave: 2013, stanje: dober (rabljeno), številka stroja/vozila: 3063, The cost-effective discharge of condensate for your compressor. The oil is separated from the water using a filter set. Hodpfeqmmffox Agujnk The filter set is included in the scope of delivery. The treated water (only when used with the filter set) meets the requirements for discharge into the sewer system. Warranty and guarantee are excluded in this listing. Price on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Model: Amada HFE M2 220t 4m, 8-osna hidravlična upogibna stiskalnica Letnik: 2012 Tonska moč: 220 ton Največja dolžina upogiba: 4280 mm Hnedpsv S U Izefx Agusk Dolžina hoda: 200 mm Hitrost približevanja: 1 – 100 mm/s Hitrost upogibanja: 1 – 10 mm/s Hitrost vračanja: 1 – 100 mm/s Kapaciteta olja: 195 l Moč motorja: Teža: 17.450 kg Dimenzije: Dolžina stroja: 5070 mm Globina stroja: 2075 mm Višina stroja: 3085 mm Razdalja med stranskima okvirjema: 3760 mm Širina prečke: 180 mm Višina mize: 960 mm Odprtina (svetel odprt): 470 mm Globina grla: 420 mm

Leto izdelave: 2017, stanje: dober (rabljeno), številka stroja/vozila: 4789, The cost-effective solution for condensate drainage for your compressor. The oil is separated from the water using a filter set (PLEASE NOTE: the filter set is not included in the delivery scope). The treated water (only when used with the filter set) meets the requirements for discharge into the sewer system. Hnjdpsqmmcgofx Aguok Warranty and guarantee are excluded in this listing. Price on request.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 100.000 h, tlak (min.): 10 letvica, tlak (maks.): 10 letvica, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, built-in refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20 °C Relative humidity 0% Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Nominal motor power: 18 kW Nominal motor speed: 4,867 rpm Shaft power requirement at maximum operating overpressure: 24 kW Shaft power requirement at idle: 5.6 kW Compressed air temperature after dryer: 23 °C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Hedpfx Aou Rptysgujnk Residual oil content under reference conditions

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 15.996 h, vhodna napetost: 400 V, skupna masa: 6.750 kg, 1000 kN Max. stroke: 200 mm Weight: 6,750 kg Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours With manual angle measurement and correction system With safety laser UVV inspection carried out as scheduled / Maintenance always carried out regularly by Amada Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Hodpfx Astwliwjguonk Tool Holder: 4 pcs UKB Substructure for Double V Die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Miscellaneous: Light barrier requires repair (new price approx. €4,500) – included separately as a replacement (has already been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to businesses and without any warranty!

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 1.730 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 580 kg, skupna dolžina: 1.335 mm, skupna širina: 750 mm, skupna višina: 1.880 mm, tlak (maks.): 11 letvica, temperatura okolja (min.): 3 °C, okoljska temperatura (maks.): 45 °C, raven hrupa: 66 dB, vrsta zaščite (IP koda): IP55, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Model: Aircenter SK22 Year of manufacture: 2020 Condition: Very good, used Operating hours: 6,000 h Load hours: 1,730 h Next service in: 2,589 h Technical Data Pressure: 11 bar Effective delivery rate: 1.67 m³/min Rated drive motor power: 11 kW Hnodpfx Aoxnnd Dsguok Drive motor protection class: IP 55 Electrical supply: 400 V / 3 Ph / 50 Hz Dimensions (W x D x H): 750 x 1,335 x 1,880 mm Weight: 580 kg Compressed air receiver: 350 l Compressed air connection: G 1 Sound pressure level: 66 dB(A) Refrigeration Dryer Power consumption: 0.49 kW Pressure dew point: 3 °C Pressure drop: 0.06 bar Refrigerant: R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment to EN 60204-1: Yes Scope of delivery: – Complete original documentation – 2x RFID cards – 5 m supply cable with 32A plug

Leto izdelave: 1996, stanje: dober (rabljeno), številka stroja/vozila: xxxx, High-Performance Bench Thread Tapping Machines on T-Slot Table Hnjdpfxjf Tcy Dj Aguek Technical Data: - Thread tapping capacity approx. M3 – M16 - Speed range up to 500 rpm - Working area (pivot radius) 2500 mm - Quick-change tool holder, size 2, diameter 31 mm - Various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm - Table height 910 mm - Machine vice with jaw width 200 mm - 3-jaw chuck 250 mm - Pneumatic connection with pressure regulator - Mobile base frame - Required space approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 11.574 h, potovalna razdalja osi X: 1.525 mm, pomik osi Y: 762 mm, pomik po osi Z: 625 mm, skupna višina: 3.235 mm, skupna masa: 13.500 kg, največja dolžina izdelka: 5.000 mm, Ta 3-osni DOOSAN MYNX 7500 je bil izdelan leta 2020 in je opremljen z upravljalnikom Heidenhain TNC 620 ter merilno tipalo TS 460. Velikost mize znaša 1600 mm x 750 mm, maksimalna hitrost vretena pa je 12.000 vrt/min. S dimenzijami 5000 × 4050 × 3235 mm in maso 13.500 kg je to odlična priložnost za nakup tega vertikalnega obdelovalnega centra DOOSAN MYNX 7500. Za dodatne informacije nas kontaktirajte. • Dolžina mize: 1600 mm • Širina mize: 750 mm • Vretenasti stožec: ISO 40 dvojni kontakt • Maksimalna hitrost vretena: 12.000 vrt/min Dimenzije Hnedjx U Dtwspfx Agujk Globina stroja: 4050 mm

Stanje: novo, Table length: 1200 mm Table width: 1200 mm Table height: 840 - 890 mm Machine weight: approx. 0.32 t Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels: 165 mm Height adjustable from approx. 840 to 890 mm Hodpfxepk Iv Uo Aguenk Underside reinforced with ribbing. Including floor bearing Optional accessories available! Surface flatness: 0.2 - 0.4 mm per 1000 mm. Table can be moved with a pallet truck. Pallet truck not included in the scope of delivery.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 2.850 h, potovalna razdalja osi X: 800 mm, pomik osi Y: 450 mm, pomik po osi Z: 510 mm, proizvajalec krmilnikov: SIEMENS, skupna višina: 2.985 mm, skupna masa: 5.000 kg, število mest v zalogovniku orodij: 30, teža orodja: 8.000 g, število osi: 3, This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It is equipped with a SIEMENS 828 D CNC control and offers a travel range of 800 mm on the X-axis, 450 mm on the Y-axis, and 510 mm on the Z-axis. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. It features a 30-position tool magazine and additional equipment such as a chip conveyor and an electronic handwheel. Contact us for further information regarding this machine. Hnsdpex D E H Ijfx Aguek Additional equipment • Electronic handwheel • Chip conveyor • Oil scraper • Coolant spray gun • 2 x hydraulic vices • 25 x BT40 tool holders Machine advantages Technical advantages • Table dimensions: 1000 x 450 mm • Distance spindle nose – table surface: 150 – 775 mm • Max. tool diameter with adjacent pockets free: 125 mm • Max. tool diameter with all pockets filled: 80 mm Additional information Machine still under power Dimensions Machine depth: 2158 mm