Separator olja in vode s filtrirnim elementom

Kaeser Aquamat CF38

Leto izdelave: 2017, stanje: dober (rabljeno), številka stroja/vozila: 4789, The cost-effective solution for condensate drainage for your compressor. Ibsdpfx Ahsqmmcgjqob The oil is separated from the water using a filter set (PLEASE NOTE: the filter set is not included in the delivery scope). The treated water (only when used with the filter set) meets the requirements for discharge into the sewer system. Warranty and guarantee are excluded in this listing. Price on request.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type TR450 Iedefbt Sijpfx Ahqjbb The spray-rotation cleaning system type TR450 is an automated cleaning and degreasing unit featuring a lid that opens easily upwards. The system is designed for cleaning single parts and/or bulk materials in baskets sized LxWxH 520x320x200h mm. During the cleaning process, the basket must be closed with a lid. The cleaning result depends on a slight tumbling motion of the parts within the basket when cleaning bulk material; the fill level in the basket must be observed accordingly. Additionally, the unit is equipped with a flood tray beneath the goods basket, allowing for immersion rinsing of the parts, thereby achieving an even better cleaning result. Including the following features: • Fully made of stainless steel 1.4301, inside and outside • Level monitoring and automatic fresh water refill • Full system insulation • Hot air drying (power: 11.6 kW) • Steam vapor extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket, 520x320x200h mm, mesh size: 6x6 mm, with height-adjustable locking lid Connected load: approx. 20 kW (32 amp plug)

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: HIKSA250Aneu, Complete Telemecanique / Schneider Canalis KSA - 400A busbar trunking system available! Total stock: 75 running meters! Type KSA 250A / 250 Ampere - 5-pole - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Iodpfxspgmryo Ahqsbb Busbar lengths mainly 5m, also available in 1.5m and 3m Price per meter incl. connectors, end pieces, and mounting brackets Feeder and tap-off boxes 16-32-63A available as options (Other tap-off boxes 125 - 250A available upon request) Dismantling performed by a certified electrician. Busbars are in excellent condition! Please inquire about your required lengths or accessories! Stock item, immediately available! ----- Old Kloeckner Moeller BD1 system still available! Busbars, elbow elements, feeders, and tap-off boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock! Please inquire! Are you also looking for a crane system?

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 50 m/min, dolžina mize: 4.000 mm, širina mize: 2.000 mm, največja hitrost vretena: 22.000 obr/min, vrtilni moment: 128 Nm, nos vretena: 63, CNC Heidenhain iTNC 530 S.P. WORKING RANGE X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. Orientation of T-slots: parallel to the X-axis movement. AXIS CHARACTERISTICS: Feed rate: 50,000 mm/min Acceleration: 4 m/sec² WORKING CLEARANCES Maximum horizontal passage: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from the floor: 330 mm CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE HOLDER Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut. Integrated cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum working torque on A/C axis: 450 Nm Axis clamping torque: 1,400 Nm Available spindle power (S1/S6): 22/33 kW Available spindle torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool interface: HSK – A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s actual capacities. 30-POSITION HSK CHAIN TOOL MAGAZINE: Automatic chain-type tool changer with 30 stations located on the rear side of the work area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter with adjacent stations occupied: 90 mm Max tool length: 300 mm Max tool weight: 10 kg MEASURING SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurization of measuring scales. SPRAY-MIST TOOL COOLANT SYSTEM: Mist lubrication system. The mist is produced by mixing air and oil. Activated via M function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving finishing quality. EXTERNAL TOOL COOLANT: Coolant supply system managed by CNC with nozzles arranged on the spindle flange, complete with 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum required current: 235 A The machine is complete with: • Remote electronic handwheel Heidenhain HR550 • Various tool sets included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and electrospindle Ibodpfozb Evlsx Ahqsb • Two chip conveyors on either side of the worktable • User and maintenance manual with CE declaration of conformity

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Ibedpfxevllxds Ahqjb Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: dober (rabljeno), Tlak 11 bar Iedpfx Ajg A Hc Hehqebb Prostornina 1500 litrov

Stanje: rabljeno, Hladilna enota, povratni vodni hladilnik, vodni hladilnik, chiller O. Hellwig Leto izdelave: cca 1995 Hladilna zmogljivost: cca 8 kW Nazivna moč hladilne enote: 3 kW Hladilno sredstvo: R422D Prostornina vodnega rezervoarja: cca 35 litrov Pretok obtočne črpalke: 40 litrov/min Moč črpalke: 0,63 kW Vodna priključka: 1/2 palca Priključek na omrežje: 380 voltov, 50 Hz Ibodpfx Aepu R Ncehqjb - Nastavitev temperature preko vrtljivega potenciometra Dimenzije (D x Š x V): 1100 x 750 x 140 mm Teža: 285 kg

Leto izdelave: 1990, stanje: dober (rabljeno), Compressor system with air dryer and compressed air tank. Length: 800 mm Width: 800 mm Height: 1000 mm Flow rate: 1.5 m³/min Ijdpfxjinur Ao Ahqjbb Power: 11 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.100 mm, Oprema: dokumentacija / priročnik, STANDARD EQUIPMENT Specialized beam and column design constructed as a complex assembly, which ensures automatic crowning without the need for separate control or manual adjustment. The two upper pressing cylinders are individually controlled (on the Y1 and Y2 axes), enabling quick angle corrections. AKAS safety light curtain (motorized) Electric foot pedal with 2 pedals, panic-stop function Electronic selection for Teach-In programming of each axis Upper tool holder with double-sided, mechanical quick punch clamping Inverter – reduced energy consumption High speed function up to 100 tons over 3 m Operating hour counter, initial oil fill AMNC 3i graphical, 18.5” touch screen controller: Isdpjzcg Ixofx Ahqebb Y1, Y2 – right and left pressing cylinders X1, X2 – rear stoppers forward/backward Z1, Z2 – rear stoppers lateral manual movement (4-axis) R – simultaneous height adjustment of rear stoppers Operation from memory or directly from USB Tool library (for AMADA tools only) Programming: 2D graphical, numeric angle and Teach-In programming, 3D graphical with external software Modular tooling system (835 mm, 415 mm and sectional versions – optional) Digipro angle measurement system, infrared Technical data: Press force (kN) — 1,000 Table length (mm) — 3,110 Distance between uprights (mm) — 2,705 C-frame opening (mm) — 420 Stroke (Standard) (mm) — 200 Stroke (Long Stroke option) (mm) — 350 Installation height (Standard) (mm) — 470 Installation height (Long Stroke option) (mm) — 620 Table width (mm) — 180 Table height (mm) — 960 Approach speed max. (mm/s) — 200 Working speed (mm/s) — 15 Return speed (mm/s) — 150 Number of controlled axes — 7 Rear stopper travel range (X-axis) (mm) — 700 Rear stopper travel range (X-axis with stopper laid flat) (mm) — 1,020 Rear stopper travel range (R-axis) (mm) — 250 Movement speed (X-axis) (mm/s) — 500 Movement speed (R-axis) (mm/s) — 160 Movement speed (Z-axis) (mm/s) — 1,000 Power requirement (kW) — 16.5 Oil tank (litres) — 160 Control — AMNC 3i graphical, 18.5” touch screen controller DigiPro wireless angle measurement — standard accessory Machine communication options — USB, UTP network External programmability — with BendCAM software

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits Iodpfxoiu Smbs Ahqsbb 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package