Hladilnik, vodni hladilnik, hladilnik

Kühlmaschinen, MTA S.p.A TAEevo Tech 121 P3-20 – 35 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL DATA: Injection Unit: - Screw diameter: 135 mm - Screw stroke: 610 mm - Injection volume: 8,731 cm³ - Shot weight (PS): 7,860 g - Screw speed: 125 rpm - Screw torque: 14,000 Nm - Max. screw torque (at reduced speed): 15,630 Nm - Plasticising rate (3-zone screw): 222.9 g/s - Plasticising rate (barrier screw): 279.2 g/s - Injection rate: 1,904 cm³/s - Plasticising pressure: 1,648 bar - Max. injection pressure: 2,000 bar - Nozzle stroke: 1,100 mm - Nozzle contact force: 210 kN - Material cylinder: L/D = 25 - Number of heating zones (incl. nozzle): 8 - Heating power: 88.5 kW Clamping Unit: - Clamping force: 20,000 kN - Minimum clamping force: 2,000 kN Dsdpfx Afew Aw Tajlsul - Opening force with cushion: 1,600 kN - Opening stroke: 3,000 mm - Max. daylight between platens: 3,800 mm - Mould height: 800 – 1,800 mm - Tie bar spacing (H x V): 2,000 x 1,600 mm - Platen size (H x V): 2,700 x 2,430 mm - Max. mould weight (moving/fixed platen): 2 x 41,330 kg - Max. total mould weight: 62,000 kg - Dry cycle stroke (Euromap 6): 1,400 mm - Dry cycle time (Euromap 6): 5.5 s Ejector Unit: - Ejector stroke: 400 mm - Ejector force: 385 kN Drive and Cooling: - Installed power, main drives: 265 kW - Oil tank capacity: 1,600 l - Max. oil cooling capacity (at 25°C): 43.2 kW - Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): - Z-axis stroke: 4,280 mm - X-axis stroke: 1,800 mm - Y-axis stroke: 2,600 mm - Robot fully integrated with the machine – operated via machine control panel The machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, home appliances, technical). Still under power, test run possible. IMMEDIATELY AVAILABLE If interested, please contact us – we can provide more photos, a video of the machine in operation, technical documentation, and arrange a convenient viewing date.

Stanje: pripravljen za uporabo (rabljen), Format: 0.5–1 l, max. output: 5,000 cartons/h, with cap applicator and EURO-LINE cartoning machine. An on-site inspection is possible. Dujdpfxjrviq He Afljl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4341, skupna masa: 285 kg, Riveting Press Brand: Agme Model: RR-14 Manufacturing Serial: 7004322 Manufacturing No.: 4341 Djdpferfwy Isx Afloul Year of Manufacture: 2010 Specifications: Maximum diameter (40 kg/mm²): 14 mm Adjustable riveting stroke: 5–50 mm Air pressure: 6 bar Adjustable riveting time: 0–5 sec Power supply: 220/380V, 50/60Hz Installed power: 1.2 kW Control circuit: 24V DC Two-hand safety control: Included 4-language operation interface: Included Piece counter: Included Weight: 285 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, HAITIAN MARS II MA10000/6800 Universal ServoDrive (2016) Only 17,000 hours in automatic cycle! Technical Main Parameters: Clamping force: 10,000 kN Opening stroke: 1,220 mm Minimum mold height: 500 mm Maximum mold height: 1,160 mm Daylight between platens: 2,380 mm Tie bar spacing: 1,160 x 1,160 mm Platen size: 1,650 x 1,700 mm Screw diameter: 90 mm L/D ratio: 24.4 mm/mm Shot volume: 2,721 cm³ Shot weight (PE): 1,986 g Injection speed: 544 g/s Max. injection pressure: 2,280 bar Machine dimensions: 12.5 x 2.49 x 2.75 m Machine weight: 50,000 kg Equipment and Features: 423 – Proportional valve for injection (Rexroth) S01 – 8x hydraulic core pulls (4x fixed platen, 4x moving platen), with servomotor 432 – 8x core relief 662E – 16x integrated hot runner zones 623 – Acoustic alarm 237C – Safety clamping force sensor 430C – 8x pneumatic cascade control Cylinder and screw designed for processing 30% glass-filled materials 419A – Parallel movement: opening/ejector or opening/core 667 – 6x freely programmable inputs/outputs Flow meter with 6 pipes + hoses + cable ducts + valves + filters + nozzles + assembly, all per Lamky specification (Stäubli quick couplings) Total power sockets: 4x230V/16A, 2x400V/16A, 4x400V/32A Centering ring diameter (fixed and moving side): 250 mm 8x pressure gauges for core pull circuits 409A – 8x pneumatic valves (8 mm, 3/2), 4x fixed, 4x moving side Duedpfjwtgltox Aflsl E65 – Interface for temperature controller (4 zones) 236 – Automatic ejector bar retraction (operator side)

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" Dusdpew U N Ixsfx Afljl • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Krauss Maffei Injection Moulding Machine KM 1600 – 17200 MX Year of manufacture: 2016 General Description: Modern injection moulding machine with a fully hydraulic clamping system. Equipped with the advanced MC6 control system, based on an industrial computer operating in real-time Ethernet technology. The system is operated via an integrated 19-inch control panel with a colour touchscreen, LED backlighting, and graphical visualisation of all active processes (ProcessDesigner module). Plasticising Unit: Complete system for thermoplastics processing Screw diameter: 135 mm Version with wear (abrasion) protection Non-return valve Open nozzle Technical Data: Clamping Unit: Clamping force: 16,000 kN Mould opening force: 1,120 kN Platen dimensions (W x H): 2550 x 2100 mm Tie bar clearance (W x H): 1870 x 1420 mm Opening stroke: 2700 mm Mould height (min.–max.): 700 – 1600 mm Max. daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection Unit: Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Shot weight for PE: 6860 g Screw speed (nominal / max.): 81 / 100 rpm Electrical and Hydraulic Equipment: Main drive power: 160 kW Installed heater capacity: 93 kW Number of barrel heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 / h Oil tank capacity: 2400 l Dimensions and Weight: Net weight with control cabinet: 92 t Dusdpfx Aswyw Npsflsl Machine dimensions (L x W x H): 14.17 x 4.04 x 2.93 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Servo-hydraulic injection moulding machine Clamping force: 9,000 kN (900 tonnes) 🔹 General Information: Year of manufacture: 2017 Control Unit: UNILOG B8 Installed power: 53.9 kW Operating hours: only 999 Dry cycle time: 4.0 – 770 sec/mm Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm Machine weight: 35,200 kg 🔹 Injection Unit: Screw diameter: 105 mm Injection volume: 4,545 cm³ Djdpfx Afewzy N Uoleul Screw rotation speed: 159 rpm Screw L/D ratio: 22 Nozzle stroke / max. nozzle force: 129 mm / 950 kN Max. nozzle stroke: 525 mm Number of heating zones: 7 🔹 Clamping Unit: Clamping force: 9,000 kN Max. mould opening stroke: 1,800 mm Min. / max. mould height: 600 mm / 1,200 mm Max. daylight (between platens): 2,400 mm Tie bar spacing (H × W): 1,450 × 1,100 mm Ejector stroke / force: 300 mm / 165 kN Mould opening force: 300 kN Core pulls: 2

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: TET802P3-20 - 2200356834, hladilna zmogljivost: 159 kW (216,18 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, skupna masa: 2.192 kg, okoljska temperatura (maks.): 46 °C, temperatura okolja (min.): −20 °C, vhodna napetost: 400 V, pritisk: 6 letvica, temperatura: 7 °C, volumenski pretok: 27,1 m³/h, tlak črpalke: 3,13 letvica, skupna širina: 1.250 mm, skupna dolžina: 3.535 mm, skupna višina: 2.151 mm, trajanje garancije: 3 meseci, vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, Process chiller / air-cooled water chiller Type: TAEevo Tech 802 P3-20 MTA S.p.A. The TAEevo Tech 802 P3-20 are compact, air-cooled water chillers suitable for outdoor installation (from -20°C to +46°C). Includes crankcase heater, phase monitoring, electronic expansion valves, 678-liter buffer tank, built-in P3 circulation pump on the suction side, and winter control (condenser pressure control down to -20°C). Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 159 kW Chilled water outlet/inlet temperature (°C): 7 / 12 Dusdpfx Afswltwgolel Flow rate (m³/h): 27.1 Available pump pressure (bar): 3.13 Ambient temperature (°C): 32 Refrigerant: R410A Electrical data: Voltage: 400 V; Frequency: 50 Hz; Phases: 3 Max. power consumption: 79.48 kW Max. current: 142.2 A Starting current (circuit): 286.2 A Protection class: IP54 Dimensions: Length: 3535 mm, Width: 1250 mm, Height: 2151 mm Weight: 2192 kg Connection: Rp 3" Serial number: 2200356834 Year of manufacture: 2020 Condition: Cosmetic 2, technically OK (used) Price: on request in Euro (plus VAT ex Nettetal) Used machines may show cosmetic wear due to previous use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Stanje: novo, Leto izdelave: 2024, Chillers from 5 to 600 kW using the natural refrigerant propane R290. Dusdpfxei Ab Hce Aflol We offer various models and configurations, from equipment supply to turnkey installation. Contact us for a non-binding inquiry or schedule an appointment with our experts, who can assess and develop an on-site feasibility study.

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 29.646 h, vpenjalna sila: 900 kN, premer vijaka: 100 mm, injekcijska masa: 3.691 g, odmični hod: 1.120 mm, Ponujamo brizgalni stroj HAITIAN MA 9000 v odličnem stanju, idealen za veliko količinsko proizvodnjo plastike. Stroj je bil skrbno vzdrževan in ima zelo nizko število obratovalnih ur ( Duodpfx Afsxc U Hzolsl