Vlačilna vozila

Jungheinrich EZS 130 --> verkauft LS!

Stanje: rabljeno, številka stroja/vozila: 16567, Leto izdelave: 2019, obratovalne ure: 1.469 h, nosilnost: 3.000 kg, gradbena višina: 1.400 mm, velikost sprednje pnevmatike: , velikost zadnje pnevmatike: , skupna masa: 562 kg, vrsta motorja: Električni, proizvajalec: Jungheinrich Godpfjxtvpxex Afwsua

Stanje: novo, Leto izdelave: 2026, - Capacity: 1.2 mm - Working width: 250 mm - Supplied with 8 sets of rollers Guodpfx Afogg Nrkjwea

Stanje: rabljeno, Leto izdelave: 2001, Širina udarne stene: 4000 mm Višina udarne stene: 1000 mm Zunanje dimenzije: 4600 x 1500 mm 2 x 1,5 kW motorja Skupni nazivni volumenski pretok: 7000 m³/h Odsesovalni priključki levo in desno s premerom 300 mm Lokacija skladišča: Garbsen Guodpevvizksfx Afwoa

Stanje: kot nova (razstavni stroj), Leto izdelave: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, suitable for underground storage of heating oil and diesel fuels, 1 manhole (optionally also available with 2 manholes). Capacity: 100,000 litres Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg Additionally, we can equip our tanks with the following accessories: - Leak detection system with under- and overpressure leak indicators - Manhole shaft with shaft cover, available in walk-on or drive-over versions - Partition walls (for multi-chamber tanks) - Internal coatings (e.g. two-component epoxy resin), partial or full lining - Content and level measurement instruments as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or petrol - Fuel dispensers for diesel, biodiesel and petrol – optionally with complete tank data acquisition - External tank insulation with PU foam The tank is internally cleaned, and the external coating has been overhauled and tested at 14 kV. Gjdsi Enxdjpfx Afwoua Cost-effective delivery with our own truck possible. Simply inform us of the delivery location and you will receive an immediate quote for exact freight costs. Should you require further information, simply call us or send us an email. Trade-in and purchase of tanks/containers possible, please feel free to contact us regarding this. Delivery time by arrangement! We always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Leto izdelave: 2013, stanje: rabljeno, Features: * Used telescopic belt conveyor * Condition: fully functional with signs of use * Ideal for fast material transport * Professionally dismantled and packed * Including support legs Guodpfx Afsiuqcwowoa * Including control cabinet * 3 units in stock * Price per unit Technical Data: Manufacturer: VanDerLande Year of manufacture: 2013 Model: TTB-800-4x16 Belt direction: loading and unloading Color: anthracite grey Total length retracted: 5,550 mm Total length extended: 16,000 mm Total width: 1,500 mm (incl. control cabinet) Width: 1,220 mm Belt width: 800 mm Condition: good (used) Belt type: smooth / black Conveying height: 1,100 mm Net weight: 3,300 kg Two selectable speed levels. Telescopic Belt Conveyor The telescopic belt conveyor is ideal for linking machines or workstations in picking zones and for optimizing internal logistics processes. When in operation, the telescopic belt conveyor can convey sensitive and variously sized bins, boxes, or other packaging and item units to or from loading/unloading points; it can also be used as a connecting segment before or between production and processing machines. Additionally, it enables efficient parts transport within operations and warehouses, making it suitable for handling significant volumes and distances. Tailor-made Solutions for Your Intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a customized offer or advise you on planning or installation questions. Simply let us know your requirements and site conditions. Benefit from our many years of experience and excellent network of specialists. We have successfully completed projects for companies in a variety of sectors, such as logistics, the pharmaceutical industry, skilled trades, and the electronics sector. Together, we will find ways to cost-effectively and sustainably optimize your processes and material flow. We can also offer fully automated sorting systems or supplementary components such as picking shelves or bins.

Leto izdelave: 2020, stanje: generalkompletno obnovljen (rabljeno), Dear customers! Our experience has shown that communication via email usually only causes unnecessary delays. We would like to assist you quickly, and for that, it’s better to talk on the phone for three minutes rather than exchanging emails for three days. TSWi 20.20 Dry Spray Booth Dimensions: 2000 x 2000 mm (W x H) Fan is integrated into the wall Airflow: 7,200 m³/h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 mm Ø Depth: 900 mm Double filtration: Paper filter + Paintstop filter mat using clamping strip (+150,- EUR net) Options/additional cost for: Transition from square to round: 150,- EUR net Paintstop filter mat clamping strip: 150,- EUR net Side deflector plates with hinges: 590,- EUR net Gedpfx Afjfr T Eqewsua Images may differ. We are also happy to offer you complete spray rooms with supply air unit, heat exchanger, supply air ceiling, ducting and more. Just contact us.

Stanje: novo, *Technical Standard Specification: Device type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C supply temperature, 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of at least 2 bar) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C *Functional Equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return line of circulation and cooling water inlet - Reversing circuit for leak-stop operation (operable up to system shut-off temperature) Gedofnvwqepfx Afweua - Ball valves in supply and return - Automatic temperature-dependent system shut-off - Fill duration monitoring and aqua timer - Adjustable pump run-on - Adjustable temperature alarm - Options: interface cable - Control unit SBCmini with relay for collective alarm, 230V, at the rear of the controller on terminal - Heating control SSR - Switch cabinet IP54 - Interface 20mA TTY; Arburg pin assignment - Cekon plug 16A - Corrosion-resistant components (stainless steel, brass) - Device mounted on castors, two of which are steerable with brake - Additional temperature safety device for secure shutdown of the heater on heating contactor - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Flow rate (max) 27 l/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Design: submersible pump / peripheral impeller *Dimensions / Weights / Colours Dimensions (L/W/H): 600 mm x 240 mm x 493 mm (excl. connections) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey, Front door: RAL 5015 sky blue *Connections: Circulation medium: socket G1/2" Cooling water: socket G3/8" *This device is compliant with European directives. Other guidelines and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: zelo dobro (rabljeno), skupna širina: 36.000 mm, skupna dolžina: 90.000 mm, skupna višina: 9.500 mm, Zum Verkauf: Hochwertige Stahlhallenstruktur – ASTRON LINDAB Guten Tag, Wir bieten eine äußerst robuste und langlebige Stahlhallenstruktur von ASTRON LINDAB mit einer Gesamtfläche von ca. 2.800 m² und einer Höhe von über 8,5 Metern zum Verkauf an. Diese Struktur wurde ursprünglich in Warschau für das renommierte Unternehmen PURMO RETTIG HEATING, einen globalen Marktführer im Heizungsbereich, errichtet. Vor einigen Jahren wurde das gesamte Grundstück, auf dem sich die Halle befand, verkauft und zu einem neuen Wohnkomplex umgebaut. Infolgedessen wurde die Lagerhalle unter Aufsicht von ASTRON LINDAB vollständig demontiert. Alle Bauteile wurden ordnungsgemäß transportiert und exakt nach den Vorgaben von ASTRON LINDAB auf einem anderen unserer Grundstücke wieder aufgebaut. Die Demontage und der Wiederaufbau wurden von einem professionellen Fachunternehmen durchgeführt. Jedes Bauteil ist katalogisiert, beschriftet und nummeriert. Godpeylc Uyefx Afwsua Technische Daten: Gesamtfläche: ca. 2.800 m² Spannweite: 36,6 Meter Gesamtlänge: 90 Meter Höhe: 8,64 Meter (maximale Höhe 9,36 Meter) Anzahl der Segmente: 14 Keine Stützen im Innenbereich Verkauf als Modul möglich: Die Halle kann auch in zwei oder drei kleinere Module verkauft werden, zum Beispiel: 1.500 m² / 1.000 m² / 800 m² Bitte beachten Sie: Der Preis für kleinere Module ist um 25 % höher. Aktueller Marktpreis für eine neue, identische Konstruktion beträgt ca.: 450.000–500.000 EUR netto / 1.900.000–2.100.000 PLN netto Wichtige Informationen: Zum Verkauf gehören nicht nur die Hauptkonstruktionselemente, sondern auch die Verbindungsbeschläge, die Dachkonstruktion aus Stahl, Bolzen und Muttern sowie zahlreiche weitere Kleinteile aus der Demontage. Sämtliche Originalschrauben, Muttern und Komponenten sind sorgfältig sortiert und in zwei großen Überseecontainern gelagert. Sie sind lediglich für den Kauf und die Montage der Dämmung sowie der Dach- und Wandverkleidungselemente verantwortlich. Dach- und Wandpaneele sind nicht im Lieferumfang enthalten und müssen nach der Montage der Hallenkonstruktion neu angeschafft und installiert werden. Ebenso liegt die original Konstruktionsdokumentation der Halle vor und auf Wunsch kann ein Tragwerksplaner für eine neue Ausführungs- oder Anpassungsplanung zur Verfügung gestellt werden. Dieses Angebot stellt eine einmalige Gelegenheit dar, eine vergleichbare Lagerhalle zu wesentlich geringeren Kosten zu realisieren. * * * HINWEIS 1: Wir sind offen für ein Co-Investment mit einem Grundstückseigentümer zum gemeinsamen Bau der Halle – Konditionen nach Vereinbarung. HINWEIS 2: Es besteht die Möglichkeit des Tauschs gegen Immobilien, einen Luxuswagen oder andere Werte. Wir laden Interessenten herzlich ein. PREIS: 179.000 Euro / 750.000 PLN Wir freuen uns auf Ihre Kontaktaufnahme durch seriöse Kaufinteressenten.

Leto izdelave: 2020, stanje: generalkompletno obnovljen (rabljeno), Dear customers! Our experience has shown that communication by email often unnecessarily prolongs the process. We would like to assist you quickly, and a three-minute phone call is more effective than exchanging emails for three days. TSWi 30.20 Dry Spray Booth Dimensions: 3000 x 2000 mm (W x H) Fan is integrated into the wall Airflow: 10,800 m³/h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 mm diameter Depth: 900 mm Guedpfx Aofr T Emefwja Double filtration: Paper filter + Paintstop filter mat with Clamp rail (+180 EUR net) Options/Surcharge for: Transition from rectangular to round: 150 EUR net Paintstop filter mat with clamp rail: 180 EUR net Side baffles with hinge: 590 EUR net Images may differ. We are also pleased to offer complete spray booths with supply air systems, heat exchangers, supply air ceilings, ductwork, etc. Please feel free to contact us.

Stanje: rabljeno, številka stroja/vozila: 006645, Max. panel width: 5600 mm Gjdpfx Afev Ir Scoweua Max. panel length: 2850 mm Max. main saw blade projection: 125 mm Number of clamps: 11