Stroj za brušenje površin - horizontalni

JUNG unbekannt

Leto izdelave: 1960, Stanje: rabljeno, Surface grinding machine with 250 x 135 mm magnetic chuck 400 Volt, power: 1.8 kW Gsdpfxoiuz Tgs Afqott

Stanje: rabljeno, Leto izdelave: 1982, Grinding length: 500 mm Grinding width: 225 mm Workpiece height: 400 mm Total power requirement: 5.5 kW Machine weight approx.: 3.4 t Gedpfocxxtmsx Afqstt with NC control NC81, table toothed belt drive 100-25000 mm/min, automatic infeed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety device

Stanje: rabljeno, Leto izdelave: 1987, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Distance between centers: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Spindle speed range: 25–1250 / 32–1600 / 36–1800 rpm, 18 steps Feed rate: 0.05 – 8.5 mm/rev Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Gtjdpfx Aou Ixznofqst Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions (L x W x H): approx. 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 – 2.8 mm (end position clutch not functional, manual shut-off required) Top slide with 4-way toolpost Steel faceplate Ø 705 mm with offset threaded holes

Stanje: rabljeno, max. grinding length: 300 mm gmax. grinding width: 150 mm Gtsdpfx Afsr Nyateqst table movement - longitudinal feed: 2 - 20 m/min grinding wheel speed: 3000 rpm electric connection: 380 V, 1.1 kW required space: 1500 x 1100 x 1750 mm weight: 920 kg

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Godehp Rcrspfx Afqjtt Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: rabljeno, Cup grinding machine Manufacturer: Gustav Brueckner Gtsdscv Tb Dopfx Afqst Model: FSH 1 Maximum distance: Table to grinding wheel 200 mm Table size: 315 x 135 mm Voltage: 380 Volt Power: 0.75 kW Current: 1.85 amps Required space: Depth 650 x Width 600 x Height 1600 mm

Stanje: dober (rabljeno), Magnetic chuck 455 x 170 mm Digital display Water tank Gsdpetu Il Tjfx Afqstt Dressing device Wet grinding attachment

Stanje: rabljeno, Spindle moulder, table milling machine - Spindle moulder: with fixed spindle - Speeds: rpm - Motor power: kW Gjdpfxecl Svve Afqstt - Dimensions: 1000/1870/H1040 mm - Weight: 560 kg

Stanje: novo, Leto izdelave: 2025, Cutting speed: 35 m/s Grinding height: 210 mm Workpiece length: / mm Machine weight: approx. 210–260 kg Space requirement: approx. 1100 x 760 x 860 mm The G115 surface grinder is a compact grinding machine designed for machining the outer circumference or face of the grinding wheel on horizontal or vertical surfaces of a workpiece. With the use of fixtures or profiled grinding wheels, inclined or contoured surfaces can also be machined. This machine is ideally suited for small businesses, maintenance workshops, home workshops, laboratories, training demonstrations, etc. TECHNICAL DATA Maximum stock removal: not more than 0.03 mm Maximum peripheral speed of grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal table travel: 340 mm Cross table travel: 170 mm Table T-slot: 1-12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W/220 V Vertical handwheel feed interval: 0.025 mm Lateral handwheel feed interval: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forward/backward and left/right. The grinding head can be raised and lowered vertically. The entire machine is built with high rigidity. The grinding head runs smoothly. Compact design and low noise emission. The work enclosure is available separately. The machine is lubricated using a manual oil pump. To lubricate, simply pull out the handle. If you need other special accessories to increase work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: The radial run-out of the taper bore axis at a distance of 100 mm from the proximal end of the main spindle is 0.01~0.02 mm. Gtedpfovuuvkjx Afqjt

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Okvarjen gravirni stroj Deckel Gedpfow H Rdtjx Afqjtt