Stroj za površinsko brušenje

JUNG JF415 / JF420 SPM-X

Stanje: dober (rabljeno), Leto izdelave: 2004, Swing diameter over bed Ø 320 mm Swing diameter over cross slide 150 mm Turning length 750 mm Spindle bore 52 mm Spindle power 16 kW Quill diameter 60 mm Quill stroke 140 mm Spindle taper 4 MT Spindle speed 3000 rpm Djdpfxowu Dq Aj Ah Sski Feed rate X-axis 1000 mm/min Feed rate Z-axis 2000 mm/min

Stanje: zelo dobro (rabljeno), Stehle S820 (avtomatski brusilnik za ravne rezila). Prosimo, preverite tudi v vsiljeni pošti (junk mail), če v roku 24 ur po oddanem povpraševanju ne prejmete odgovora!!! Specifikacije: • Največja širina orodja: 330 mm • Premer orodja – glave za skobljanje (min-max noževne glave): 120 - 230 mm • Hitrost brusilnega kamna: 2850 / 5750 obratov/min • Možno brušenje od 2 do 12 nožev na glavo z indeksnim kolescem • Priložene indeksne plošče za brušenje 4, 6, 8, 10 in 12 nožev • Pogon brusilnega kamna: 1,3 kW • Kot odmika: 10 - 35° • Rezervoar za hladilno tekočino: 125 L Dsdpfjq Dzkujx Ah Sjki • Motor črpalke za hladilno tekočino: 0,28 kW • Priključna moč, skupno: 2 kW Prosimo, preverite tudi v vsiljeni pošti (junk mail), če v roku 24 ur po oddanem povpraševanju ne prejmete odgovora!!!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, nosilnost: 210 kg, doseg roke: 3.100 mm, Our industrial robots are thoroughly inspected, tested, and immediately ready for operation before delivery. Dodpfewlz Dbjx Ah Sjki The robot comes complete with: - Control cabinet - Teach pendant - Connection cables

Stanje: rabljeno, Leto izdelave: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm, 170–600 rpm Stroke speed, steplessly hydraulically adjustable: 0–23 m/min Dkodpfx Ast Hwupsh Sji Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special Equipment: - Mounted 2-station swivelling table for accepting 2 workpieces, with mechanical workpiece clamping via hand lever - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock, as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further honing machines constantly in stock – please contact us for more information.

Stanje: rabljeno, Leto izdelave: 1985, Grinding length 600 mm Grinding width 200 mm Total power requirement 7.5 kW Machine weight approx. 2.3 t O F F E R We can offer you, subject to prior sale and errors, without obligation, ex-stock: JUNG Horizontal precision surface & profile grinding machine with microprocessor control Model JF 520 MS Year of manufacture 1985 2225 _____ Max. grinding length (table longitudinal movement 600 mm): 600 mm Max. grinding width (cross movement 230 mm): 200 mm Max. grinding height under the wheel: approx. 230 mm Max. distance table – spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep feed grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. grinding head vertical speed: 500 mm/min Grinding wheel size: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, stepless: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total drive approx.: 7.5 kW - 400 V - 50 Hz Weight approx.: 2,300 kg Accessories / Special Features • Microprocessor program control (SIEMENS) with simple display. Program sequences are set via decade switches and stops (with vernier) and monitored on the display. • Programs: Plunge grinding with/without cross positioning, surface grinding with incremental or continuous cross movement, creep feed grinding in conventional or counter direction with/without cross positioning. All programs include automatic roughing, finishing, sparking out cycles and automatic retraction. • Automatic straight dressing device AF 65 S with automatic compensation of dressing amount and automatic adjustment of spindle speed for consistent cutting speed (with display) • DIAFORM – wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed unit with feed rate and motor load display Dedpjwd Tx Uofx Ah Seki • Short stroke device for controlling the table reversal and cross table clamping • Swivelling JUNG sine magnetic chuck 450 x 180 mm, mounted. Additional swivelling sine magnetic chuck 350 x 175 mm, fine pole with stop. • Coolant system with paper band filter, further accessories, operating manual Condition: Very good, with accuracy protocol from JUNG technician! Please click here for a video of the machine: Delivery: ex-stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Dksdpfxjthd Shs Ah Ssi Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: rabljeno, Leto izdelave: 2003, NAKAMURA TOME SUPER NTJ CNC-STROJNO STRUŽENJE FABRIKAT: NAKAMURA TOME, JAPAN MODEL: SUPER NTJ GODINA PROIZVODNJE: 2003 UPRAVLJANJE: FANUC 18 iT B PREČNIK STEGE: 210,0 mm MAKS. PREČNIK OBRTA: 200,0 mm RASTOJANJE IZMEĐU CENTARA: 780,0 mm PREČNIK POVLAČNE CEVI: 80,0 mm HODOVI: X OSA: 750,0 mm Z OSA: 130,0 mm REVOLVERSKA GLAVA: 2 x 12 POZICIJA BRZINA VRETENA: do 5.000 o/min PROLAZ VRETENA: 65,00 mm Dedpfx Ahjv I Tx Ro Soki PRIRUBNICA VRETENA: A2-6 DODATNO: - CNC KRATKI MAGACINSKI ULAŽIVAČ ŠIPKI - REVOLVERSKI ALAT - TRANSPORTER STRUGOTINE - PRIRUČNICI

Stanje: dober (rabljeno), Leto izdelave: 2012, doseg roke: 2.696 mm, model krmilnika: KR C4, KUKA Robot Model: KR 90 R2700 pro Technical Data Maximum Reach: 2,696 mm Rated Payload: 90 kg Rated Additional Load Carousel / Wrist / Arm: 0 kg / 0 kg / 50 kg Rated Total Load: 140 kg Positional Repeatability (ISO 9283): +/- 0.06 mm Number of Axes: 6 Mounting Position: Floor Footprint: 830 mm x 830 mm Weight: approx. 1,058 kg Axis Data Range of Motion A1: +/- 185° A2: -140° / -5° A3: -120° / 155° A4: +/- 350° A5: +/- 125° A6: +/- 350° Speed at Rated Payload A1: 136°/s A2: 130°/s A3: 120°/s A4: 292°/s A5: 258°/s A6: 284°/s Operating Conditions Ambient Temperature during Operation: 10°C to 55°C (283 K to 328 K) Controller: KR C4 Dsdpfxotpwxls Ah Soki

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, The granulate mixer is available in 6 versions: The design can be either in stainless steel or painted steel. Technical specifications: MV 2 The MV 2 enables complete mixing of the entire plastic granulate, thanks to the forced feed via the screw sleeve. Container capacity: 120 kg / 200 L Djdpfx Ajd R Atreh Sski Dimensions (L x W x): 700 mm x 700 mm x Height: 1050 mm / 1250 mm - Removable screw - Mixing time control system - Extraction unit - 1 discharge outlet - Mobile frame with castors, 100 mm diameter, all with locking brakes.

Leto izdelave: 1999, stanje: rabljeno, Tractive force – max. 6.0 t Ram stroke – max. 1250 mm Dkodsd Il A Nopfx Ah Soi Space requirement approx. 1.20 x 1.20 x 3.25 m