Stroj za površinsko brušenje

JUNG JF 625 / 630

Stanje: dober (rabljeno), Leto izdelave: 2018, Miza 1473 x 305 mm, pomiki XYZ: 1000 x 410 x 400 mm (kolenski tip), hodi pinole 127 mm, stožec vretena ISO40, avtomatski izvlečni vijak, motor vretena 5 KM, hitrosti vretena 70 - 3600 vrt/min, CNC upravljanje Prototrak SMX, Pedpfx Adjxftqdeyjgg

Stanje: rabljeno, Leto izdelave: 1985, Swing diameter over bed: 810 mm Maximum swing diameter over cross slide: 560 mm Distance between centers: 00 mm Bed width: 480 mm Cross slide travel: 400 mm Top slide travel: 180 mm Turning tool shank cross-section: 32 x 25 mm Drive power: 22 kW Spindle torque: 30 Nm Spindle nose size: 11, DIN 55027 Podpfx Adexn Ty Reyegg Spindle diameter at front bearing: 152.4 mm Spindle bore: 106 mm Speed range: 9 - 1800 rpm Number of speeds: 24 Longitudinal feed: 0.092 - mm/rev Cross feed: 0.046 - mm/rev Metric threads: 0.5 - 112 mm Inch threads: 1/4 - 56 TPI (G/1") Thread module: mm Thread DP: 1 - 224 pitch Tailstock quill diameter: 115 mm Quill stroke: 225 mm Quill taper: MK 6 Workpiece weight between centers, max.: 00 kg Workpiece weight, max. (unsupported): 750 kg Röhm 3-jaw chuck, Ø ... Machine dimensions approx.: 4600 x 1900 x 1600 mm Weight approx.: 4300 kg Number of feed and thread pitches: 99 Distance between centers: 00 mm Accessories: - 3-axis digital readout - Mobile chip guard along the entire length (plexiglass) - Coolant system - Rapid traverse in Z and X axes - Multifix toolholder, size C, with 6 interchangeable cartridges - Bed stop with micrometer adjustment - Fixed steady rest - 300 mm - Taper sleeve for main spindle MK 6 - Live center (cone center) MK 6 Bed guideways in very good condition!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Pgsdpfxsw Ucyuo Adyeg Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: dober (rabljeno), Leto izdelave: 2008, dolžina brušenja: 1.250 mm, dolžina mize: 1.250 mm, obremenitev mize: 1.200 kg, širina mize: 500 mm, največja hitrost vretena: 2.600 obr/min, hitrost vretena (min.): 1.000 obr/min, skupna masa: 9.300 kg, potovalna razdalja osi X: 1.400 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, moč: 185 kW (251,53 KM), vhodna napetost: 400 V, potrebna višina: 2.870 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, X-axis: Grinding length 1,250 mm, travel 1,400 mm Pedpfxeu Hiq Rj Adyogg Y-axis: Distance table to spindle center 700 mm, travel 600 mm Z-axis: Grinding width see note, travel 600 mm Note: The grinding area in the cross direction (Z-axis) depends on the travel distance and the grinding wheel width. Example: Cross travel = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See images for more technical data

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard X-axis Pgjdpjvdal Aofx Adysg 650 mm Y-axis 525 mm Z-axis 350 mm Table length 600 mm Table width 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Feed rate Z-axis 1,000 mm/min Grinding wheel size 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical Data – Main Specifications: - Table surface: 605 x 300 mm - Max. table longitudinal travel (manual): 750 mm - Table cross travel: 340 mm Pjdpfx Adew Dvkajyegg - Grinding height between table and new grinding wheel min./max.: 22.5 / 322.5 mm - Standard size of magnetic chuck: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X axis / Longitudinal travel: - T-slots (number x width): 3 x 17 mm - Table feed, hydraulic: 0.3 – 25 m/min - Travel per handwheel revolution: 47 mm Y axis / Vertical travel: - Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm - Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Dial graduation on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes: 0 – 5 - Rapid traverse: 400 mm/min Z axis / Cross travel: - Automatic cross feed, intermittent: 0.5 – 20 mm - Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min - Travel per handwheel revolution: 5.0 mm - Dial graduation on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 min⁻¹ Accessories: Various grinding wheels Documentation

Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm–0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Pgjdpjuqackjfx Adysg

Stanje: rabljeno, Leto izdelave: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t G E I B E L & H O T Z CNC cycle-controlled precision surface grinding machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal travel 900 mm): 800 mm Max. grinding width (cross travel 500 mm): 500 mm Max. grinding height under wheel: approx. 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total drive approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • Easy-to-program GEIBEL & HOTZ grinding cycle control • Model SL with standard grinding programs including surface and multi-surface grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, loading station stop – all inputs/parameters via operator panel and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronics and SIEMENS OP 25 • Table movement via roller ring screw drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical axes driven by ball screw • Diamond dresser on the left side of the table next to the magnetic plate, with automatic dressing cycle, compensation, pull-back, and edge rounding on grinding wheels possible • MPM balancing device for grinding wheel • Mounted permanent electromagnet chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with separate band filter coolant filtration • Complete enclosure with electrically monitored sliding doors Pgodpjt Hxamefx Adyeg • Separate control cabinet, work lamp, various accessories, operation manuals Condition: Good to very good! The wide grinding wheel is suitable for large-area stock removal! Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Stanje: dober (rabljeno), Leto izdelave: 1992, 1 used surface grinding machine Manufacturer: ELB Model: SUPER - RUBIN 024 CNC Year of manufacture: 1992 Travel paths: Grinding length: 600 mm Grinding width: 275 mm Grinding height: 375 mm Table clamping surface: 900 x 300 mm Table load capacity: 300 kg Vertical feed: max. 300 mm/min Cross feed: max. 2,000 mm/min Control system: UNICON Grinding wheels are included in the scope of delivery, see photos. Podji Ra Tyspfx Adysgg

Stanje: rabljeno, Leto izdelave: 2003, Die-sinking EDM machines / Electrical Discharge Machines Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Pedpfxsvyzf Ne Adysgg Table size X: 500 mm Table size Y: 400 mm Max. workpiece size X: 780 mm Max. workpiece size Y: 530 mm Max. workpiece size Z: 300 mm Max. electrode weight: 50 kg Max. workpiece weight: 500 kg Electrode changer: 4-position Generator: 64 Amps Lowerable tank Charmilles control system