Visokonatančna ploščinska brusilka

JUNG JF 520

Stanje: dober (rabljeno), Leto izdelave: 1980, obratovalne ure: 15.393 h, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 600 mm, (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Giedpfx Ajxru H Tofqel For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: rabljeno, Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx.: 385 mm Table clamping surface: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: Ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical feed: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross feed: 1000 mm/min Total power requirement: 6 kVA Machine dimensions (L x W x H): 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, dressing device, wet grinding system with paper band filter Gsdpfst Tqrnsx Afqsil

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, PODROBNOSTI O PRECIZNI RAVNINSKI BRUSILKI Znamka: JUNG Tip: JF 520 Leto izdelave: 1997 Teža stroja: 2.200 kg Skupna teža: 2.600 kg Lokacija: Haiger Cena: 24.000 € brez DDV Opis: Serijska št. 3821, digitalni prikazovalnik Heidenhain, mikroprocesorsko krmiljenje, profilirna naprava Diaform, osvetlitev stroja, hladilni sistem, magnetna vpenjalna miza. Tehnični podatki: Vpenjalna površina (D x Š v mm): 600 x 200 Brušljiva površina (D x Š v mm): 600 x 250 Maks. velikost magneta v mm: 600 x 200 Mere brusnega kolesa maks. v mm: 225 x 25 x 51 Razdalja miza/sredina vretena v mm: 350 (+50) Mizni vzdolžni pomik nihanja v m/min: 1 – 20 Gjdpfx Afjxqa I Toqjil Polžasti pomik v mm/min: 0 – 500 Pogon brusilnega vretena - hitrost v obr/min: 800 – 4200 Moč kW (s polžastim pomikom): 2,2 (3,5)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, dolžina brušenja: 600 mm, širina brušenja: 250 mm, premer brusilnega koluta: 250 mm, JUNG JF520 / JF525 SPM-X Mechanically, geometrically, and electrically overhauled according to the JUNG new machine protocol. Equipped with a new SIEMENS control system (12" Touch operator panel), incorporating our 25 years of experience in refurbishing JUNG machines. Giedpfx Afsbwl Uheqel - New control cabinet with magnetic force regulation and thyristor control for the main spindle motor - Control system modernization with 12" SIEMENS touch operator panel cycle control, featuring a user-friendly control panel - Remote maintenance module available as an option - Plain-text fault display (multilingual) - Electromechanical stepper motor feed with programmable automatic retraction - Roughing/finishing feed selection - Selectable spark-out strokes - Dressing compensation - Plunge grinding cycles - Automatic central lubrication - All numerical values (feeds) and on/off functions, such as hydraulics and coolant, adjustable via the touch panel - All analogue functions, such as speed, magnetic force, and traverse speed, as well as grinding functions, directly accessible by the operator via rotary and toggle switches - Supplied with 12 months warranty Maximum magnet size: 600 x 200 mm (standard: 500 x 200 mm) Maximum grinding area: 600 x 250 mm Delivery time: approx. 10–12 weeks We are happy to accept your used JUNG grinding machine in trade-in.

Stanje: dober (rabljeno), Leto izdelave: 2004, Ref. No.: Lg 34522 Godpfxjip Uqme Afqsil High-Performance Punching Press HAULICK+ROOS ROS 500 - 1250 used, in good condition Year of manufacture: 2004 (without soundproof enclosure) including - Infinitely variable drive - 2-connecting rod drive mechanism - Pneumatic clutch-brake combination - Stroke adjustment - Siemens PC 670 screen control - Oil circulation lubrication Technical Data Max. press force: 500 kN Stroke rate: 30 to 900 strokes/min Stroke: 12 to 60 mm Shut height (max, stroke at BDC): 320 mm Clearance between uprights: 1,250 mm Table area: 1,250 x 730 mm Pass-through opening in table: 1,160 x 140 mm Ram area: 1,250 x 450 mm Ram adjustment: 60 mm Drive power: 26 kW Weight: approx. 11,000 kg Dimensions (L x W x H): approx. 2,800 x 1,300 x 3,250 mm Equipment and Accessories: Servo roller feeder VAMCO SP 150 Year of manufacture: 2014 Feed width: max. 150 mm Material thickness: max. 3.0 mm

Stanje: generalkompletno obnovljen (rabljeno), dolžina brušenja: 600 mm, širina brušenja: 200 mm, dolžina brušenja 600 mm širina brušenja 200 mm elektromagnetna plošča 450×175 mm X-hod 660 mm Godoxal Hyopfx Afqsil Z-hod 225 mm dimenzija brusilnega koluta 250x25x51 mm Krmiljenje Jung TouchScreen teža ca. 3000 kg

Stanje: rabljeno, Leto izdelave: 1980, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 290 mm Machine from the Physikalisch-Technische Bundesanstalt - Geometrically overhauled - Electrical system inspected, fully functional, relevant parts replaced - All wear parts renewed - Paint: light grey, good condition Equipment: - Electro-magnet 500 x 200 mm - Grinding spindle overhauled - 2-axis digital readout for Y and Z axes - Automatic feed for Y and Z axes - Y-axis with zero shut-off - Manual hand wheel dresser - Infinitely variable speed for grinding wheel - Constant speed compensation for wheel wear - Used paper band filtration system Max. height with 250 mm wheel diameter: 290 mm Max. grinding area: 600 x 250 mm Max. load including magnet: 100 kg Warranty: 1 year on geometry and electronics within Germany Giodpfx Afjwb Hygeqjl Delivery: ex works Availability: immediately Payment: before collection Acceptance at our facility Shipping as per your instructions

Stanje: zelo dobro (rabljeno), Hello, We are offering used Erowa PalletSetW vices. All items have been cleaned and tested by us. Gjdeitcq Tspfx Afqjil - ER-025895 Vice PalletSet W 40mm - ER-054922 Flat Vice 8mm PalletSet W - ER-055774 Vice 0-170mm Additionally, a full functionality check was performed. These vices show minor signs of use, but are in very good technical condition. Single unit purchase is also possible. Spare parts are available as well. If you have any questions, please do not hesitate to contact us.

Leto izdelave: 1989, Stanje: pripravljen za uporabo (rabljen), Table dimensions X/Y: 600mm/200mm, Grinding dimensions X/Y: 600mm/250mm, Magnet dimensions X/Y: 600mm/200mm, Grinding wheel diameter: 225mm, Grinding wheel width: 25mm, Grinding wheel bore: 51mm, Spindle center-to-table distance: 350mm (+/-50mm), Table feed: 20m/min, Creep feed: 0mm/500mm/min, Speed: 4200rpm, Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2100mm, Weight: approx. 2500kg. On-site inspection is possible. Gedjv Exrwjpfx Afqoil

Stanje: rabljeno, Leto izdelave: 1985, Grinding length 600 mm Grinding width 200 mm Total power requirement 7.5 kW Machine weight approx. 2.3 t O F F E R We can offer you, subject to prior sale and errors, without obligation, ex-stock: JUNG Horizontal precision surface & profile grinding machine with microprocessor control Model JF 520 MS Year of manufacture 1985 2225 _____ Max. grinding length (table longitudinal movement 600 mm): 600 mm Max. grinding width (cross movement 230 mm): 200 mm Max. grinding height under the wheel: approx. 230 mm Max. distance table – spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep feed grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. grinding head vertical speed: 500 mm/min Grinding wheel size: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, stepless: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total drive approx.: 7.5 kW - 400 V - 50 Hz Gsdpfx Aowd Tx Uofqoil Weight approx.: 2,300 kg Accessories / Special Features • Microprocessor program control (SIEMENS) with simple display. Program sequences are set via decade switches and stops (with vernier) and monitored on the display. • Programs: Plunge grinding with/without cross positioning, surface grinding with incremental or continuous cross movement, creep feed grinding in conventional or counter direction with/without cross positioning. All programs include automatic roughing, finishing, sparking out cycles and automatic retraction. • Automatic straight dressing device AF 65 S with automatic compensation of dressing amount and automatic adjustment of spindle speed for consistent cutting speed (with display) • DIAFORM – wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed unit with feed rate and motor load display • Short stroke device for controlling the table reversal and cross table clamping • Swivelling JUNG sine magnetic chuck 450 x 180 mm, mounted. Additional swivelling sine magnetic chuck 350 x 175 mm, fine pole with stop. • Coolant system with paper band filter, further accessories, operating manual Condition: Very good, with accuracy protocol from JUNG technician! Please click here for a video of the machine: Delivery: ex-stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), MULTIVAC T-800 ID št.: 2569 Multivac T-800 pladnjevi varilni stroj z vakuumom/plinom z 2 kompletnima orodjema, vozičkom za orodje, vakuumsko črpalko, dozirnikom pladnjev Carsö itd. Letnik 2010, v zelo dobrem stanju! Gjdpfx Afjpcda Reqsil Orodje: 215 x 167 mm št. 2 in 236 x 186 mm. Dimenzije linije: 800 x 100 x V 200 cm.

Stanje: novo, We supply all spare and wear parts for the JUNG JF and HF series, such as grinding wheel flanges, switches, bellows, splash guards, replacement grinding spindles, cross spindles, piston rods, etc. Gisdpfx Afegbt U Noqsl Additionally, we offer accessories including magnetic chucks (new or refurbished), dressing devices, paper band filters, slideway oil, lubrication pumps, etc. This also includes used parts that are no longer available new from the manufacturer. For inquiries, please specify the exact designation of the required part.

Leto izdelave: 2022, Stanje: generalkompletno obnovljen (rabljeno), Refurbished dresser for all JUNG HF and JF models available on an exchange basis. Assembly can also be provided upon request. Gijdpfx Afehyudfoqol Please specify the exact machine model when making inquiries. We will supply you with the refurbished dresser, and you return the defective part to us.

Stanje: novo, Leto izdelave: 2022, Power: 1.1 kW Drilling capacity steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle taper: MT-4 Drilling stroke: 120 mm Spindle reach: 254 mm Table size: 475 mm x 425 mm Drill table tilt/swivel: 45° left / 360° Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Godpfx Afjgulr Hjqoil Weight: 132 kg