Stroj za nastavitev rokavov

JUKI DP-2100

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), The ultrafiltration system is used for cleaning various liquids. The membrane elements feature a 37/3.8 channel design, 0.1 μm pore size, and a length of 1300 mm. Each of the two modules contains 32 ceramic rods with a capacity of 2,000 L/h each. Scope of supply: 1 construction frame, 1 feed pump, 1 rod heater, 2 bleed pumps, 1 cleaning tank, 1 membrane valve, 1 pneumatic diaphragm pump, 1 UF ceramic module, 1 temperature monitoring unit, 1 control valve, 4 pressure gauges with display, 1 control unit according to VDE 0110/0113 CE, 1 flow meter, and 1 pre-assembly of the system at the supplier’s factory. Bljdef Dc D Hspfx Aiqon

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 95.239 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 173937, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, razmak između stupova: 520 mm, minimalna višina orodja: 250 mm, skupna dolžina: 5.100 mm, skupna širina: 1.800 mm, skupna višina: 2.200 mm, skupna masa: 6.630 kg, Oprema: dokumentacija / priročnik, The machine operated flawlessly until the last day before the arrival of the new machine. It is therefore in good used condition. The machine is being sold due to lack of space in the injection area and is no longer connected to power. Pump, injection unit, and clamping unit are leak-free. The machine manual is available. Videos of the machine are available. Operating hours (pump): 95,239 Operating hours (automatic): 86,082 Repairs in recent years: - Filter changed annually Bljdov D Nxljpfx Aiqen - 05/2024: Fan in control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/back - 02/2023: New keypad installed (motor and heating panel) - 12/2022: Ejector and injection unit sealed, including new piston

Leto izdelave: 2008, stanje: dober (rabljeno), Industrial stainless steel humidifier, steam generator Outdoor unit 4 x 8 kW heating elements, 32 kW total Bljdpfofl Iqujx Aiqen Maximum temperature: 160°C

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AN-No.: 88.04.017 D, 8 pieces of very clean (refurbished) Jakob Müller Frick AG NF42 looms from 1988, 1989, and 1990 from my inventory. The machines run flawlessly and are 100% operational (completely overhauled). 12 shafts, without magazine, with Mütrans, some with Müdata. 1 unit NF 2/84mm from 1989 for €6,900 Item No.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm, completely overhauled, from 1990 at €6,500 each Item No.: 90.01.704 B Item No.: 90.01.755 A Item No.: 90.01.229 A 1 unit NF 2/84mm, completely overhauled, from 1989 for €6,500 Item No.: 89.00.118 D 3 units NF 2/84mm, completely overhauled, from 1988 at €6,500 each Item No.: 88.04.244 A Item No.: 88.02.758 A Item No.: 88.02.758 B The machines come from a curtain tape production line and were originally equipped with a Z compartment. As part of the general overhaul, they have been converted to standard compartments. All tension trees and pressure rollers have been newly vulcanized by Westland. Card rollers in the chain box are new or newly vulcanized. The central lubrication system in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and are fitted with 12 shafts. All machines are fitted with Mütrans II. Individual machines with double-belt take-off (for heavy-duty fabrics) can be delivered upon request. I believe this is possible for 4-5 machines. Finely knurled tension trees can also be installed for 4-5 machines as an option. All needle holders are suitable for double needles. Two additional Mütrans II units can be installed for this purpose upon request. The machines have been rebuilt from scratch. All bearings, shafts, and bushings have been inspected and replaced as necessary. All swing arms have been checked and replaced if required. Installed: - 1st shaft free (spacer block installed) - 2nd and 3rd shaft: swing arm 201 Bodpfx Aisr Ix Igeqjln - 4th–6th shaft: swing arm 202 - 7th–9th shaft: swing arm 203 - 10th–12th shaft: swing arm 204 - 13th shaft: swing arm 205 All shaft springs have been checked and replaced where needed. There are no porous, cracked, or defective parts. The electrical system has been checked, the circuit board for thread monitoring has been inspected and, if required, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and undamaged. The machines are offered without Müdata. Four units are additionally equipped with crawler gears. The machines have been set up and tested. Note: Machines are supplied without oil, yarns, slats, reeds, needles, and chain links. Delivery on Euro pallet, FOB Wuppertal.

Leto izdelave: 2024, stanje: novo,

Stanje: dober (rabljeno), Približno 96 m dvotirnega tirnega sistema na voljo iz zaprte mesnopredelovalne tovarne. Bedjq Ii S Ejpfx Aiqeln

Stanje: novo, Leto izdelave: 2025, Dubbelnaalds drievoudig transportmachine 10 MM 8000 EURO EX BTW EX VERZENDING *ook verkrijgbaar in 6 MM - 8 MM - 10 MM* met - draadsnijder - bartack - snelslag - voetpedaal Bedpfx Aswi Iy Deiqjln - LED naailamp - steeklengte 12 mm - servoaandrijving met bedieningspaneel - naaldenafstand 10 mm inclusief onderstel en tafel Merhaletex naaimachine Merhaletex bestaat al meer dan 20 jaar en staat altijd klaar voor onze klanten. Dat is onze kracht. Wij kunnen u het volledige programma aanbieden en vertalen uw wensen naar de juiste naaimachine voor uw werk. Natuurlijk stopt onze service niet bij levering van een naaimachine. Ook na levering staan wij voor u klaar. Nieuwe en gebruikte industriële naaimachines VOOR ALLE INFORMATIE NEEM CONTACT MET ONS OP NIETS GOEDKOPER DAN BIJ MERHALETEX Wij kopen en verkopen industriële naaimachines NIEUW en gebruikt De advertentie is automatisch vertaald. Vertaalfouten zijn mogelijk.

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), A placement line is available, consisting of three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer, and one (1) DEK screen printer. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, maximum placement rate: 3,000 components/hour, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s–1.1s. Bjdpfjtz Di Nsx Aiqsln 2) Zevatech/Juki FM740, year of manufacture: 1997, maximum placement rate: 10,000 components/hour, placement accuracy: +/-0.05mm, PCB dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Zevatech/Juki TR4NEZ tray changer, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing method: stencil printing, max. PCB size: 450mm/340mm, print accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of an integrated system and controlled by the same PC. On the screen printer, the amplifier board of the front squeegee axis is defective. Documentation is available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 240 V, Stroj za prešivanje Bsdpfx Aoyyp U Rjiqsln V zelo dobrem stanju. Nahaja se na Madžarskem.

Stanje: pripravljen za uporabo (rabljen), A tower shearing line is available, comprising the following components: (1) Hopper material accumulator, with a material buffer of approx. 100–150 m, max. working width: 5,000 mm; (2) Fleissner steamer, stainless steel, max. working width: 5,000 mm, height: 5,000 mm; (3) Main drive roller Menschner, Monforts cast roller, year of manufacture: 1987; (4) Menschner NTS-T-III tower shearing machine, year of manufacture: 1988, working width: 300–5,500 mm, equipped with three shearing cylinders; (5) Control panel for auxiliary drives, deflection, transfer bridge, ETF roller accumulator, year of manufacture: 1988, storage capacity: approx. 80 running meters, with two Erhardt+Leimer center controls. Bedpfx Aei Atnfeiqoln