Ravnalni brusilnik

jones shipman 540L

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: Godjrqwbispfx Anfjit ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: rabljeno, Leto izdelave: 2007, Število obratov 8000 min-1 Teža 5500 kg Leto izdelave 2007 Krmiljenje Siemens 840D Mere (d/š/v) 3600 x 2800 x 2400 mm Godpfewm Rqajx Anfoit Pomik - X 1035 mm Pomik - Y 560 mm Pomik - Z 510 mm Na voljo več slik

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Grinding area: 2000x900mm, cross travel: 875mm, longitudinal travel: 2450mm, distance from table to spindle center: 845mm, magnetic chuck dimensions: 2000x800mm, max. table load: 2.3t, longitudinal axis feed: 1000–30,000mm/min, cross axis feed: 0.01–2000mm/min, vertical axis feed: 0.001–1500mm/min, grinding wheel dimensions: 500x100x203.2mm, grinding spindle motor power: 22kW, length: 6800mm, width: 3450mm, weight: 13t. An on-site inspection is possible. Godpfx Aeuyk N Ijnfsit

Stanje: rabljeno, Stroj za valjanje navojev ORT RP30U 2-valjna 30 ton Zasukljive glave Inverter #1331 Stroj si lahko ogledate v delovanju v našem skladišču v Gussago BS. Možnost demonstracije M i m u Stroji za valjanje navojev so mehanski postopki brez odrezavanja, ki se lahko izvajajo hladno ali vroče, z namenom izboljšanja površinske kakovosti (torej tudi izboljšanja utrujenostnih lastnosti). Moč (tona): 30 Giodot H Ty Ujpfx Anfst Število valjev: 2

Stanje: rabljeno, Leto izdelave: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: [mm not specified] Workpiece height: 60 mm Total power requirement: 50 kW Machine weight: approx. 7,000 kg Space requirement: [not specified] DISKUS vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 S/N: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc external diameter: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Spindle adjustment vertically, each approx.: 150 mm Hydraulic infeed impulses for depth feed: 0.0025 – 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed each approx. (24 m/s)/765 rpm Grinding spindle drive each: 22 kW Gedpfx Aet Hw N Honfjit Total drive approx.: 50 kW / 380 V / 50 Hz Machine weight: approx. 7,000 kg Accessories / Special features • Workpiece rotary table device for round transport discs with corresponding cut-outs for inserting components and with automatic discharge of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Stepless speed adjustment of the rotary device depending on the grinding dimension and workpiece. • Manual grinding wheel adjustment via corresponding buttons • Hydraulically pivoting dressing unit (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and automatic return to the effective workpiece thickness after dressing = high time savings, can be triggered manually as well as via timer • Ampere counters for both grinding spindle drives * Central lubrication system, • Mechanical height check of parts with automatic machine shutdown in case of overheight • Separate control cabinet, separate hydraulic unit, separate large belt filter system, various grinding wheels, various transport discs, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in high-volume production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: dober (rabljeno), Leto izdelave: 2007, Deli, ki so prikazane na fotografijah z roko, niso vključene. Tehnični podatki so prikazani na sliki. Gijdsrpn Dvopfx Anfet

Stanje: dober (rabljeno), Leto izdelave: 2013, Premer brušenja 140-355 mm Dolžina brušenja 3000 mm Višina konic 260 mm Teža stroja ca. 8,3 t Prostorska zahteva ca. 8500 x 3500 mm Leta 2013 popolnoma obnovljen in vgrajen nov SPS Siemens S7 krmilnik. Brezstopenjske vrtilne hitrosti, enota za uravnoteženje, Zunanja cilindrična brusilka SA 6Ux3000 Leto izdelave 1981 Retrofit 1 x 2013 SERWEMA Maks. premer brušenja / s konjičkom 140 mm Maks. premer brušenja / brez konjička 355 mm Maks. dolžina brušenja 3.000 mm Višina konic 260 mm Maks. teža obdelovanca 500 kg Gisdpfx Asynmpyenfot Prostorska potreba stroja 8500 x 3500 mm Teža stroja 8500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1985, Na voljo je stroj za brušenje navojev in polžev Reishauer AG. Dolžina brušenja: 450mm, vpenjalna dolžina: 700mm, maks. premer brušenja: 200mm, maks. korak: 80mm, maks. teža obdelovanca: 100kg, maks. kot koraka: +/-25°, premer brusilnega kamna: 275mm/350mm, hitrost vrtenja: 1850o/min. Dimenzije stroja X/Y/Z: pribl. 2600mm/1800mm/1600mm, teža: pribl. 3400kg. Vključen je oljni centrifugator, pokrov, sistem za odsesavanje oljne meglice in razna dodatna oprema. Zaščitna zavesa proti brizganju je nekoliko otrdela. Dokumentacija je na voljo. Ogled na lokaciji je možen. Giodpfox Dm Dnsx Anfet

Stanje: zelo dobro (rabljeno), Grinding length without magnetic chuck: 1500 mm Maximum grinding width: 750 mm Longitudinal travel (X axis): 1520 mm Cross travel (Y axis): 650 mm Vertical travel (Z axis): 690 mm Grinding wheel diameter: 406 x 100 mm Spindle speed: 1400 rpm Gisdjwlh Adjpfx Anfjt Weight: 8600 kg Accessories: Braillon magnetic chuck 1000 x 500 mm Elcon 3 electronic control

Stanje: dober (rabljeno), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Centre Distance: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Smallest Automatic Travel: 1.5 mm Maximum Travel: 400 / 700 / 1020 mm Maximum Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Handwheel Feed Travel: 20 mm Maximum Infeed Depth: 1.7 mm Grinding Spindle Head Gedjvca Izjpfx Anfjit Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Spindle Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Spindle Head Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Mounting Taper: Morse 5 Collets: W25 Tailstock Mounting Taper: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or topicality of the information provided.