Vertikalna jamborna ploščad

JLG Toucan 12E Plus

Stanje: rabljeno, vrsta goriva: električni, Leto izdelave: 2021 Nosilnost pesta: 200 kg Za dodatne informacije se obrnite na center za rabljeno opremo. Rsdszflqpepfx Anpjch DE01

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta prenosa: samodejen, vrsta goriva: električni, naslednji pregled (TÜV): 10/2025, Leto izdelave: 2020, obratovalne ure: 900 h, Oprema: UVV varnostni pregled, gumene gosenice, nizka raven hrupa, žerjav, Tip-top condition! Rcedpfx Asvriuvjnpoh

Stanje: dober (rabljeno), obratovalne ure: 899 h, tip droga: teleskopski, dvižna višina: 10.650 mm, vrsta goriva: električni, Leto izdelave: 2015 Leto načrtovanja: 2015 Dovoljena skupna masa: 4.900 kg Dimenzije (D x Š x V): 365 x 120 x 199 cm Nosilnost košare: 200 kg Višina delovne platforme: 1.265 cm Tehnično stanje: dobro Vizualno stanje: dobro Za dodatne informacije se obrnite na Tona. Proizvajalec: JLG Tip: Toucan 12E Plus Leto izdelave: 2015 Teža: 4.900 kg Delovne ure: 899 Pogonski sistem: Električni, 4x2 Številka izdelka: 25041 Višina platforme: 10,65 m Rcedpey S Uu Hefx Anpoh Višina delovne platforme: 12,65 m Dimenzije platforme: 70x105 cm Doseg: 6,7 m Skupne dimenzije (D x Š x V): 365x120x199 cm Maksimalna obremenitev platforme: 200 kg Stroj je tehnično v dobrem stanju. Opremljen z dobrimi baterijami. Vključno z dokumentacijo in oznako CE. Cena: 17.950 EUR, brez DDV, na voljo na naši lokaciji v Hedelu, Nizozemska. Možna dostava za dodatno doplačilo. Ključne besede: Samo dvižna platforma, škarjasta dvižna platforma Teleskopska dvižna platforma, dvižna platforma s zglobnim roko Genie, JLG, Haulotte, Skyjack, Upright, Manitou Hinowa, Niftylift, Aichi, Snorkel, Omme Škarjasta dvižna platforma, dvižna platforma s podstavkom, dvižna platforma s členjenim podstavkom Dvižne platforme, škarjaste dvižne platforme

Stanje: rabljeno, Leto izdelave: 2023, skupna dolžina: 3.650 mm, • 8x battery, 215-260Ah • 1x socket outlet in basket • Residual-current circuit breaker (RCD) • Generator • Built-in charger • Maximum ground pressure 14.0 kg/cm² • Travel speed – lowered 6.0 km/h • Turning radius – outside 2.60 m • Turning radius – inside 0.75 m • Gradeability 30% • Working height 12.65 m • Working outreach (standard platform) 6.05 m • Articulation height 7.12 m • Slewing (non-continuous rotation) 345° • Platform capacity 1,200 kg • Basket jib – total length 4.14 m • Basket jib – vertical working range 120° (+60° / −60°) • Rear access with sliding bolt • Fully proportional joystick for drive and lift operation with integrated rocker for thumb steering • 2 mini-joysticks enable proportional control for lifting and lowering mast and basket jib • 4.14 m articulated jib • Function activation with enlarged LCD status display • Load monitoring system • AC power socket in work basket • Large tool tray • Direct electric two-wheel drive • Brushless AC drive motors • Faster battery charging • Automatic power-saving mode when stationary • Function throttle-down in case of deep discharge • On-board diagnostics system with integrated display • Automatic rear wheel brakes • Curved polyester protective hoods • Motorized platform slew • High-performance steel-roller lifting mast, 345° rotatable • Chain slack detection • 3° tilt alarm with warning light • Frame width 1.20 m • Lifting and lashing eyes • Key-secured ground operation selector switch • Battery status indicator • Hour meter • Horn • Travel direction system • Harness anchor points Rjdpfx Aexd Hx Senpjch • Xenon flashing beacon • Manual emergency lowering • Passive pothole protection • Tires (non-marking) 457 x 178 mm • Electrical system 48V DC • Deep-cycle batteries 4 x 48 V – 260 Ah • On-board battery charger, 110 V / 230 V HF • Drive motors: 2 AC motors • Electric (pump) motor: 3.5 kW, 48 V DC • Hydraulic system: hydraulic tank 15 l

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Cutter Grinder Manufacturer: Deckel Model: S0E Year of manufacture: 1988 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Rcjdpfxslxpfms Anpjh Machine No.: 88-6730 Warranty: 12 months for single-shift operation from delivery For machines located outside our North Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual Including installation of an on/off switch with undervoltage release for restart protection (e.g., in the event of a power failure or unplugging) including the production of a mounting adapter plate Sold as seen Technically, the machine corresponds to the state of the art at the time of manufacture.

Stanje: rabljeno, Leto izdelave: 2023, skupna dolžina: 3.700 mm, • 8x battery, 215-260Ah • 1x socket outlet in basket • Residual-current circuit breaker (RCD) • Generator • Built-in charger • Maximum ground pressure 14.0 kg/cm² • Travel speed – lowered 6.0 km/h • Turning radius – outside 2.60 m • Turning radius – inside 0.75 m • Gradeability 30% • Working height 12.65 m • Working outreach (standard platform) 6.05 m • Articulation height 7.12 m • Slewing (non-continuous rotation) 345° • Platform capacity 1,200 kg • Basket jib – total length 4.14 m • Basket jib – vertical working range 120° (+60° / −60°) • Rear access with sliding bolt • Fully proportional joystick for drive and lift operation with integrated rocker for thumb steering • 2 mini-joysticks enable proportional control for lifting and lowering mast and basket jib • 4.14 m articulated jib Redpfoxd Hrfox Anpech • Function activation with enlarged LCD status display • Load monitoring system • AC power socket in work basket • Large tool tray • Direct electric two-wheel drive • Brushless AC drive motors • Faster battery charging • Automatic power-saving mode when stationary • Function throttle-down in case of deep discharge • On-board diagnostics system with integrated display • Automatic rear wheel brakes • Curved polyester protective hoods • Motorized platform slew • High-performance steel-roller lifting mast, 345° rotatable • Chain slack detection • 3° tilt alarm with warning light • Frame width 1.20 m • Lifting and lashing eyes • Key-secured ground operation selector switch • Battery status indicator • Hour meter • Horn • Travel direction system • Harness anchor points • Xenon flashing beacon • Manual emergency lowering • Passive pothole protection • Tires (non-marking) 457 x 178 mm • Electrical system 48V DC • Deep-cycle batteries 4 x 48 V – 260 Ah • On-board battery charger, 110 V / 230 V HF • Drive motors: 2 AC motors • Electric (pump) motor: 3.5 kW, 48 V DC • Hydraulic system: hydraulic tank 15 l

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1986, Engraving Cutter Grinder Make: Deckel Model: S0E Year of manufacture: 1986 - overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine no.: 86-5751 with warranty Equipment: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual Incl. installation of an on/off switch Rodpfxoqctnij Anpjch with undervoltage release for implementation of restart protection for example, in case of power failure or unplugging the mains plug incl. fabrication of a mounting adapter plate Used condition, sold as seen The machine meets the technical specifications of its original year of construction.

Stanje: rabljeno, prevoženi kilometri: 369.626 km, moč: 353 kW (479,95 KM), prva registracija: 06/2012, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: > 3 osi, zavore: retarder, barva: rumena, vrsta prenosa: mehanski, emisijski razred: Euro 5, Oprema: klimatska naprava, parkirni grelec, žerjav, SEL 5325 MAN TGS 35.480 8X4H-6 BL Truck ZF Intarder / FASSI F560 / steering axle German registration / 1 owner Mileage: 22,626 km Euro 5 Gross vehicle weight (kg): 36,000 Permitted total weight (kg): 32,000 Curb weight (kg): 20,820 VIN: WMA73SZZ0CM597878 ENGINE AND GEARBOX: Displacement: 12,419 ccm Power: 353 kW / 480 HP Gearbox: 8-speed manual ZF Intarder TIRES AND AXLES: Tire size: 315/80 R 22.5 (all axles) Axle configuration: 8X4H-6 2nd and 4th axle steering Rear axle air suspension Disc brakes Wheelbase (mm): 1,795 / 4,105 / 1,350 Front axles (kg): 8,000 + 8,000 TANKS: 1 fuel tank CABIN: Rcedpfoiy Tnrex Anpjh Day cab Driver's air-suspended seat No bed Auxiliary heater Automatic climate control CD radio Cab rear wall with window BODY: Internal dimensions: Width (m): 2.53 Length (m): 6.60 OTHER SPECIFICATIONS: Trailer coupling 2 rotating beacons on cab roof External sun visor CRANE: Fassi / Model: F560RA.2.26 HE-DYNAMIC / Year of manufacture: 2012 --- We speak: DEUTSCH, ENGLISH, ITALIANO, ESPAÑOL, RUSSIAN, PORTUGUÊS, POLSKI While every effort has been made to ensure the accuracy of the information, we cannot accept liability for errors or omissions. We kindly ask our customers to refer to the available photos. Stated dimensions are approximate values. Our vehicles are sold as is, in their current condition. We invite customers to visit our company to inspect the vehicle in person. We also offer the possibility of a test drive. Note: The vehicle will be delivered with the batteries currently installed. If the customer wishes new batteries, we are happy to provide price information.

Stanje: rabljeno, Leto izdelave: 2006, nosilnost: 22.000 kg, dvižna višina: 3.860 mm, skupna dolžina: 5.855 mm, Dizel viličar Paus PGS 22 Pogon: dizelski motor Letnik: 2006 Višina dviga (mm): 3.860 Nosilnost (kg): 22.000 Redpfx Aneyu Uyyepoch

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, vrsta goriva: dizel, approx. 16,800 operating hours overhauled in 2019 fork length 2,400 mm VOLVO diesel engine lifting capacity 15,000 kg Rsdeib Iknjpfx Anpech lifting height 3,000 mm new batteries 06/2022