Delovna platforma

JLG Arbeitsbühne, JLG Toucan 1010, AH 10m

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm Iodpfx Afjxp Hmas Toht - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Ijdpfxsv Scrbj Af Teht

Stanje: rabljeno, Leto izdelave: 2014, CNC turning and milling center (9-axis) with Y-axis, B-axis, sub-spindle, and tool turret Ihjdpfxjx Hy R No Af Tst CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) ATC tool magazine Number of tool pockets: 40 Tool holder: CAPTO C6 Lower tool turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Toolholder type: BMT 55P Motor power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Part unloading with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water supply through turret - Compact filter system Knoll - Automatic workpiece measurement

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Na voljo je dvo-vreteno stružno-rezkalni center Mazak. Hod X/Y/Z: 580mm/160mm/1545mm, os B: 225°, os C: 360°, razdalja med konicama: 1500mm, maks. premer struženja: 660mm, premer nad ležiščem: 660mm, hitrost glavnega vretena/protivretena: 5000obr/min, število orodij: 40+9, tlak hlajenja: 70bar. Dimenzije stroja X/Y/Z: cca 5200mm/2550mm/2600mm, teža: cca 14000kg, ure vretena: 24679h. Vključuje visokotlačno hlajenje, SMW luneto, SMW vpenjalno glavo, integracijo lunete, Renishaw sondo, merilno sondo, CAD/CAM programsko opremo Topsolid 7.18, oljni separator, postprocesor in Inspection-Plus paket. Stroj je bil večinoma uporabljen za fino obdelavo. Dokumentacija je na voljo. Ogled na lokaciji mogoč. Ihsdox Ih Dgspfx Af Tot

Stanje: rabljeno, Leto izdelave: 2009, Cutting diameter: 15 – 560 mm Cutting range at 90 degrees: flat 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Material feed – single stroke: 900 mm Multiple feed length max.: 9,999 mm Minimum cut-off length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 – 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Machine weight approx.: 6.00 t Space requirements approx.: 3.70 x 2.50 x H2.50 m Two-column automatic bandsaw with KASTO Compact Control; frequency-controlled saw drive; minimum quantity lubrication; swarf conveyor; powered infeed conveyor 6m + 3x short roller conveyors 1m each; outfeed conveyor 2m; machine can be inspected under power. Ihsdpfxevxwkfe Af Tet

Stanje: rabljeno, Leto izdelave: 2011, Lathes Travel X-axis: 270 mm Travel Y-axis: 120 mm Travel Z-axis: 1200 mm Turning length: 1135 mm Max. swing diameter: 700 mm Max. turning diameter: 340 mm Max. torque: 680 Nm Spindle speed range up to: 4000 rpm Control: DMG Driven spindles Driven tools: 50 Chip conveyor Short bar loading magazine IRCO ILS-RBK 100/16 Various main spindle reduction tubes NC-controlled workpiece removal unit Iodowwv Ifjpfx Af Tsht Conveyor belt for transporting workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction unit Control cabinet cooling unit (up to 40°) 4-color signal tower, connection for bar loading magazine Main spindle as integrated spindle motor ISM 102 Sub-spindle as integrated spindle motor ISM 76

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, obratovalne ure: 17.400 h, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: TRUMPF, model krmilnika: TASC 6000, upogibna sila (maks.): 230 t, delovna širina: 3.230 mm, hod: 445 mm, globina grla: 420 mm, razdalja med stojali: 2.690 mm, vgradna višina: 615 mm, obratovalna hitrost: 10 mm/s, število osi: 6, tip kronanja: CNC krmiljen, kapaciteta rezervoarja za olje: 330 l, potovalna razdalja osi X: 600 mm, nastavitev zadnjega prislona: CNC krmiljen, zadnji prislon: 860 mm, skupna masa: 16.000 kg, skupna dolžina: 4.270 mm, skupna širina: 2.120 mm, skupna višina: 3.200 mm, število podpornih ročic: 2, Oprema: CE označba, dokumentacija / priročnik, nožno daljinsko upravljanje, nujno zaustavitev, sistem za merjenje kota, varnostna svetlobna zapora, zaščita prstov, Équipement spécial : + 2 consoles de support à réglage rapide sur guidage linéaire + Système de butée arrière 6 axes (X1, X2, R1, R2, Z1, Z2) avec climatisation de l’armoire électrique + Serrage supérieur hydraulique de l’outil, trempé + Bombage CNC + Préparation pour ACB + Dispositif de sécurité BendGuard pour 200 mm/s Équipement de base : - Concept d’entraînement supérieur à quatre cylindres - Entraînement électrohydraulique du coulisseau avec technologie à valve proportionnelle - Système de mesure de la course du coulisseau - Bloc hydraulique moderne - Balance de pression électronique - Suspension sphérique et inclinaison de la barre de pression - Système de butée arrière CNC - Réglage sécurisé des doigts par l’avant Ihsdpfxex Elxvs Af Tst - 2 doigts de butée - Porte-outil supérieur manuel, auto-centrant, trempé, pour changement vertical d’outil - Porte-outil inférieur hydraulique, trempé - Couvercle avant plat - Carters de sécurité modernes - Marquage CE - Refroidisseur d’huile - Refroidissement de l’armoire électrique (air-air) - Notice d’utilisation

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Ihsdpfjwp D Nbjx Af Tjt Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Total power requirement: 95 kW Approx. machine weight: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 1.100 mm, največja višina reza: 1.200 mm, Danobat CP 1211T Visokozmogljiva tračna žaga Kapaciteta rezanja, premer / kvadrat: 1100 mm Kapaciteta rezanja, pravokotnik: 1200 mm širina x 1100 mm višina Iodetv Nadjpfx Af Toht Popolnoma avtomatska

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, skupna masa: 17.500 kg, delovna višina: 1.300 mm, delovna širina: 1.300 mm, delovno območje: 1.300 mm, Amada H1300 Vodoravna tračna žaga (1982) Ijdjtv E Hcspfx Af Toht Kapaciteta: 1300 x 1300 mm Napajanje: 230 V – 50/60 Hz / 400 V – 50 Hz / 460 V – 60 Hz Pogon rezila: 11 kW Hidravlični pogon: 3,7 kW Pogon hladilne črpalke: 0,4 kW Pogon žične krtače: 0,4 kW Dimenzije rezila: 11.380 mm x debelina 1,6 x širina 65 mm Lastna teža: 17.500 kg Skupna priključna moč: 16 kW Podatki o stroju: Model: H1300 Leto izdelave: 1982 Proizvajalec: Japonska