Kolesni nakladalnik

JCB 403 / Schaufel + Gabel / nur 248h!

Leto izdelave: 2004, Stanje: pripravljen za uporabo (rabljen), Connected load: 15.5 kW, weight: 6.8 t. Gtjdpfsip D Rzjx Afqst

Stanje: novo, Leto izdelave: 2025, Oprema: pogon na vsa štiri kolesa, JCB TM220 SV C New Vehicle - JCB Diesel by Kohler [55 kW/74 HP] - Emission Stage V with DPF - Lift height: 4.56 m - Rated load capacity: 2,200 kg - 2-speed hydrostatic drive – 20 km/h - Tyres: GOODYEAR POWERLOAD 300/70R20 - Comfort cabin (ROPS/FOPS) - Radio pre-installation - Adjustable steering wheel - Fully opening windows - Heater - Front and rear self-locking differential Front axle = 45 % Rear axle = 25 % - Servo single-lever control - Euro quick coupler - Fork carrier with 1,345 mm pallet forks - LED work lights (front/rear/boom) - Yellow rotating beacon - Armrests (right & left) - Roof-mounted wiper Gtedpow Eqwkefx Afqet Immediately ready for operation; many other attachments in stock. A viewing appointment is expressly desired. On request, we can make you a leasing or financing offer through Mercedes-Benz Bank. Mr. Mihm (Tel. ...) will be happy to assist you. Further information available on our homepage. Subject to errors and prior sale!

Stanje: novo, Leto izdelave: 2024, Genie Z30/20N electric articulated boom lift, new, used, and demo machines available. Gedpforit D Iox Afqett

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.685 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 155 l, barva: rumena, moč: 102 kW (138,68 KM), Izhodni tok: 158 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 88 kW (119,65 KM), nazivna (navidezna) moč: 110 kVA, neprekinjena moč: 80 kW (108,77 KM), neprekinjena (navidezna) moč: 100 kVA, skupna dolžina: 2.390 mm, skupna širina: 1.058 mm, skupna višina: 1.681 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Cummins, vrsta hlajenja: voda, PRP output: 80 kW / 100 kVA ESP output: 88 kW / 110 kVA Engine: AKSA A4CRX46TI Emission level: Stage 2 Speed: 1,500 rpm electronic speed governor Operating voltage: 24 V Cooling: water-cooled Generator: Aksa AK 480 Voltage: 400/231 V Voltage regulator: SX460 Control panel: DSE 6120 - automatic emergency power controller Battery charger: 5 ampere Type: canopy unit; weatherproof, soundproofed • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (155 L) and vibration dampers • Engine coolant pre-heating Gtjdpfewy Iyrsx Afqst • Voltage and frequency regulation according to ISO 8528-5 • Unit suitable for stationary use only

Leto izdelave: 2021, Stanje: novo, The prices stated in this advertisement reflect the rates as of mid-2021. Due to the current international situation, the prices of steel and transportation are increasing almost daily. The availability of raw steel is strained and currently unpredictable. Therefore, we kindly ask you to inquire about current prices and availability! We are happy to provide you with a current quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW –: Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transportation price within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional uprights you can configure longer or shorter rack units (or adjust the axle spacing accordingly); this example with 4 uprights is just the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - Each with 2x3 adjustable arms, 1.20 m, load capacity 500kg per arm - With bracing approx. 1.30 m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200 mm, each with 3 height-adjustable cantilever arms - Load capacity at load center 600 mm: 500 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, axle distance = 1300mm, standard is 1.30m - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! Gedsddmr Nspfx Afqjtt - From a length of 1.50m, a small surcharge applies to the quoted price! - Special dimensions (other axle spacings) are also available on request, but also incur a surcharge and have a longer delivery time as they must be specially manufactured! - If you do not specify a different axle spacing, we deliver the rack with an axle spacing of 1.30m. - In this case, the length for a rack row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors.

Leto izdelave: 2017, Stanje: novo, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW: Price ex works incl. loading! 1 racking unit with 4 uprights: €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A cantilever racking system, hot-dip galvanized, comprising: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each with 2 x 3 adjustable arms, 1.20m long, 750kg load capacity per arm - With bracing approx. 1.30m - Double-sided uprights approx. 3,500mm high, hot-dip galvanized - Base and arm depth 1,200mm, each with 3 height-adjustable arms - Load capacity at 600mm load center: 750kg per arm / 2,250kg per upright - With longitudinal and diagonal bracing, spacing = 1,300mm (standard is 1.30m). - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m, a small surcharge applies! - Special dimensions (other column spacings) available on request; these incur a surcharge and have a longer delivery time as they are custom-made! - Unless otherwise specified, we supply the racking with a column spacing of 1.30m. For a rack row with 4 uprights (3 bays), total length is approx. 4m. Gtodpfxjddmtqe Afqst - Supplied with all bolts and nuts (shipment within Germany via parcel service directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available on request! Please contact us!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 810 kg, nosilnost: 3.900 kg, višina police: 2.500 mm, skupna dolžina: 38.750 mm, razmak osovin: 1.250 mm, razmak između stupova: 1.250 mm, nosilnost na stojalo: 3.900 kg, globina grla: 800 mm, We hereby offer you, subject to prior sale, 39 linear meters of used heavy-duty cantilever racking with a load capacity of 3,900 kg per upright. Manufacturer: SSI Schäfer GmbH Model: KR Year of manufacture: 2008 Load capacity per upright side: 3,900 kg Support profile uprights: IPE 180 Upright height: 2,500 mm Cantilever arm length: 800 mm Cantilever arm load capacity: 810 kg Cantilever arm profile with bumper: INP 80 Gtjdevt Um Hjpfx Afqet Composition: 34 uprights 68 cantilever arms 6 diagonal braces, axis dimension 1,250 mm 72 horizontal braces, axis dimension 1,250 mm Cantilever Racking System 1: 16 uprights, 15 bays, 34 cantilever arms, 30 horizontal braces, 3 diagonal braces, axis dimension 1,250 mm = 17.5 linear meters Cantilever Racking System 2: 18 uprights, 17 bays, 38 cantilever arms, 34 horizontal braces, 3 diagonal braces, axis dimension 1,250 mm = 21.25 linear meters Condition: As you can see in the photos, the cantilever racking is in very good condition and will be dismantled and loaded onto pallets. The above technical data have been taken from the manufacturer's brochures or other sources; thus, we assume no liability for their accuracy or completeness. Sale is without warranty or guarantee. We would be pleased if this cantilever rack is of interest to you and look forward to your inquiry. Your Service Team at Mertens & Frowein GmbH

Stanje: novo, Leto izdelave: 2024, Genie GS4390 diesel scissor lift with all-wheel drive, new, used, and demo machines available Gjdpfx Aferh Emteqett

Stanje: novo, Leto izdelave: 2024, Genie GS4655 E-Drive scissor lift, new, used, demo machines available Gtodpfx Asrhktpofqst

Stanje: dober (rabljeno), Syspal Gtedpfx Afofk Idieqst Tote-Behälterheber Edelstahl-Tote-Behälterheber, Hubhöhe bis 1,5 m, batteriebetrieben, 3-Phasen-Anschluss