Stroj za površinsko brušenje

JAKOBSEN 1832

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 475 mm Table size: 800 x 450 mm Longitudinal travel: 900 mm Hydraulic feed, infinitely variable: 30 m/min Automatic cross feed: 1–30 mm Vertical feed: 1–99 µm Rapid vertical traverse: 0.3 mm/min Grinding wheel size: 350 x 50 x 125 mm Grinding spindle drive: 7.5 kW Total connected load: 9.37 kW Machine weight approx.: 2.9 t Space requirement approx.: 4 x 2.7 x 2 m Hydraulic surface grinding machine with AC control for automatic surface and plunge grinding, including automatic in-cycle dressing and dressing compensation, with various feed rates for rough and finish grinding cycles. Features: - Hydraulic table longitudinal movement - Servo-controlled cross movement - Precision-grade hardened ball screw - Automatic lubrication for longitudinal and cross movements Bdedpfxsxddr Ao Afqek - Automatic vertical feed via stepper motor with digital display for pre-selectable stop position - Dressing unit for manual or automatic straight dressing of the grinding wheel - Electro-permanent magnetic chuck with automatic demagnetization and adjustable holding force - Programmable automatic spark-out (0–8 strokes) after grinding cycle with automatic lateral table stop, rapid vertical adjustment, electronic handwheel for manual Y-axis (vertical) and Z-axis (cross) movement This is a used machine, therefore we sell under exclusion of any warranty. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2015, obratovalne ure: 985 h, potovalna razdalja osi X: 905 mm, pomik osi Y: 705 mm, pomik po osi Z: 455 mm, teža obdelovanca (maks.): 3.000 kg, EDM314MF30 – SLM (Second-Life-Machine) Bdedpfx Ashfaizefqsk Complete Overhaul Travel paths X x Y x Z: 900 x 705 x 455 mm Machine table: 1150 x 850 mm Tank size: 1200 x 900 mm Distance table/chuck: 260/710 mm Electrode weight: 50/500 kg Maximum workpiece weight: 3,000 kg Machine overall dimensions: 2210 x 3450 x 3250 mm Power supply: 400V/three-phase/50/60Hz Tank height: 750 mm Features: MF30 operator interface Movable control panel Touch screen display Lift-off speed: 15,000 mm/min (Highjump) Erosion generator: 60A Integrated chiller Cartridge filtration system 8-position tool changer C-axis with direct measurement, resolution 0.0001° C-axis for positioning, rotary, and erosion operations C-axis: 100 rpm Automatic tank tracking Filling, filtering, and flushing pump Transport Initial commissioning Training 12-month warranty

Stanje: dober (rabljeno), Leto izdelave: 1991, Technical Data - Table surface: 800 x 450 mm - Grinding surface: 800 x 500 mm - Maximum distance between table surface and spindle: 650 mm - Maximum load on the table: 400 kg - Spindle speed: 1400/1700 rpm - Grinding wheel dimensions: 350 x 127 x 50 mm - Machine dimensions: 3350 x 2100 x 1750 mm Bsdpfxovx E Rte Afqedk - Weight: 2900 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, Electro-magnetic clamping plate including electronic polarity reversing control unit, control unit, and keypad complete. Please contact us if you are interested! Bdsdpfxslbggto Afqek

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 31.207.011, Datum izdelave Izvor izdelave Švica Napetost 380 V Neto teža 3150 kg Zunanje mere 400x185x175 cm Carinska oznaka 8460 TEHNIČNI PODATKI Razdalja med konicama 1000 mm Višina konic 175 mm Brusilni kolut: premer/širina/luknja 500 x 80/100 x 203,0 mm Maksimalna širina brusilnega koluta 80 (100) mm Hitrost vretena 1220, 1360–1530 min-1 Miza (postopno nastavljiva) 0,02 do 6,0 m/min Prečni suport, pot 220 mm Vpenjalna glava, Bsdpfeiwtm Ssx Afqsdk kot vrtenja 360° Hitrost (postopno nastavljiva) 20 min-1 do 400 min-1 Maksimalni premer obdelovanca 249 mm Maksimalni hod 1100 mm Konus konjička MK3 Tehnični podatki so informativni, pridržujemo si pravico do napak ali sprememb.

Stanje: potreben popravila (rabljeno), Leto izdelave: 2004, Funkcionalnost: omejena funkcionalnost, teža obdelovanca (maks.): 800 kg, potovalna razdalja osi X: 550 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, Oprema: hladilnik, Prodamo stroj žična erozija Sodick. Kupljena je bila nova leta 2004 in je obratovala do leta 2023. Na stroju je potrebno zmanejati zaslon, tesnila,... potreben je večji servis. Stroj se nahaja v Sodick demo centru pri Zagrebu, z naše strani lahko nudimo vso podporo: zagon strija, postavitev, prevoz in uraden servis. Bdsdpfxjv Hw Dhj Afqsk Za več infomacij smo na voljo:

Leto izdelave: 2001, Stanje: rabljeno, Tehnični podatki: x-hod: 400 mm y-hod: 300 mm z-hod: 500 mm Vpenjalna površina mize: 400 x 300 mm Obremenitev mize: 50 kg Krmiljenje – polavtomatsko: LASERSOFT 3D Moč laserja: 100 W Skupna potreba po moči: 27 kVA Teža stroja pribl.: 2,5 t Potreben prostor pribl.: 3 x 3,5 x 2,8 m Bdedpfxeikbtno Afqsk CNC gravirni/označevalni/konturni laserski stroj Pribl. 9.000 vklopnih ur, pribl. 5.500 delovnih ur

Stanje: rabljeno, Leto izdelave: 1990, Dolžina 600 mm Širina 400 mm Bedpfx Aefgv Ddjfqedk Višina 100 mm Teža stroja cca 200 kg . +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega ni mogoče izvesti predstavitve pod elektriko ali izdelati videoposnetka. Naš oglas vsebuje najinformativnejše fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: zelo dobro (rabljeno), Grinding range 650 x 300 x 550 mm Table size 650 x 250 mm Automatic dressing device Bdjdpfsrvhirex Afqek MARCELS MASCHINEN CH

Stanje: rabljeno, Leto izdelave: 2005, Grinding diameter: 500 mm Grinding length: 1500 mm Center height: 250 mm Control: GRINDplusIT Machine will be partially overhauled with measurement protocol and warranty Delivery within Germany and neighboring countries. 1 UR-RS 175 / 1500 standard version (T1, T2, T5, T7) 1 Grinding wheel assembly T1 400x63x127 mm 1 Grinding wheel assembly T2 400x63x127 mm 1 Grinding wheel assembly T5 400x63x127 mm 1 Internal grinding attachment T7 Ø120 mm for HF spindles 1 Center height 250 mm 2 Grinding head motors: drive power 10.0 kW 1 CNC control Heidenhain GRINDplusIT 1 Kel-ASSIST 100 PLUS (includes Kel-Assist 100 and thread calculation) 1 KEL-POLY, non-circular grinding 1 KEL-NET for CNC control GRINDplusIT 1 B-AXIS GRINDplusIT: "CNC-controlled B-axis" (standard) 1 GRINDplusIT: v constant 35 m/s or 45 m/s_adjustment of grinding spindle via control 1 T1, T2, T5, T7: T1 and T2: v=constant, T5: v=variable (Danfoss), T7: HF spindle 1 Operating unit for 1x MFM or MFV spindles, VACON 22 kW 1 x HF internal grinding spindle Fischer MFM 1224/42/31 right HJND 21 1 x HF internal grinding spindle Fischer MFV 1260/4 right 1 x HF internal grinding spindle IBAG HF 33 S 60 P 1 Tailstock with manual retraction 1 MICRO ADJUSTMENT: Tailstock base with micro adjustment 1 Spring-loaded quill insert 1 Pneumatic relief for tailstock 1 Upper table flooding (standard) 1 Reinforced workpiece headstock MK 5 DIN 55026 size 5" 1 C-AXIS: CNC-controlled C-axis for reinforced workpiece headstock 1 Fixed base for reinforced workpiece headstock 1 KELPOS: active longitudinal positioning MOVOMATIC, mounted on grinding head 1 Diameter measuring head Movomatic; DU200 1 Measuring control unit Movomatic ES124 / digital 1 KELSET: tool measuring system KELSET, MARPOSS 1 Base module for KEL-TOUCH touch sensor and KEL-BALANCE balancing unit 1 KEL-TOUCH, touch sensor for diagonal/tandem 1 Full enclosure for emulsion Bjdpfx Afjwulrhjqsdk 1 Coolant cleaning gun connected at the table 1 Grinding mist extraction unit emulsion 1 Lubricant for initial fill HF dressing unit type IBAG on upper table Data from delivery condition, no guarantee