Namizni vrtalnik

Ixion BT 15

Stanje: rabljeno, skupna višina: 1.600 mm, skupna dolžina: 1.250 mm, skupna širina: 800 mm, Lastna teža: 150 kg Stroj za rezanje navojev, tapiranje in vrtanje - Dokumentacija na voljo: Ne - CE certifikat na voljo: Ne - Serijska številka: 132832 - Moč motorja: 0,6 kW - Najvišje število obratov vretena: 1600 vrt/min - Model: omboormachine - Širina mize: 225 mm - Dolžina mize: 290 mm - Najnižje število obratov vretena: 320 vrt/min - Transportne mere: 1250 mm x 800 mm x 1600 mm (d x š x v) - Transportna teža [kg]: 150 kg Finančne informacije DDV: Navedena cena brez DDV DDV/Obdavčitev po razliki: DDV je odbitno za podjetja Kodpjwywwysfx Af Todg Dostava in odkup možna kadar koli za vse iz industrijskega področja Lukas van Rossum

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 894126H, Condition: Very good condition // completely overhauled – new heating system Kdodpfx Afsrigyzj Tsg Additional MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Stanje: rabljeno, Table-type drilling and tapping machine IXION Model BT 15 GL Machine no.: Year of manufacture: approx. 1975 Drilling capacity: 15 mm Spindle taper: Taper B 16 Tapping capacity: M2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320 - 1600 rpm, 4 stages Motor power: 0.55 kW Power supply: 380 Volt, 50 Hz - Spindle speed adjustable via 4 V-belt steps - Equipped with FAHRION GH 10 tapping chuck - With pitch guide cartridge for thread pitch; operation without guide cartridge also possible - Height adjustment of the drill head via hand crank Ksdpfx Afowk Nxqs Tedg - Column lowers out of the table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Stanje: rabljeno, TECHNICAL DATA - Spindle speed: 400 - 4,500 [rpm] - Drilling capacity in steel / cast iron: 10 / 13 [mm] - Drilling depth: 60 [mm] - Spindle to column distance: 185 [mm] - Usable table area: 220 x 300 [mm] - Motor power: 0.5 [kW] Ksdpfx Afjuhabte Todg - Power supply: 220 [V] - Speed selection via display of drill diameter and material - Electronic spindle speed control - Infinitely variable spindle speed adjustment from 400 to 4500 rpm - Constant speed under load - Adjustable drill head height through pneumatic balancing device - Fine depth adjustment through graduated vernier scale - Electronic motor protection - Fully machined base plate (220 x 300 mm)

Stanje: novo, Technical specifications for pallet racking beam: Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x Pallet racking beam, new Material color: RAL 2004 orange Box profile: 130 x 50 x 1.5 mm Beam type: PNB0413 S355MC Kdsdpfx Aelwkwdsf Teg Connector: 4 hooks Clear width: 2,700 mm Max. load per pair of beams: 3,000 kg, with evenly distributed load 02x Safety pins, new Design: fully galvanized For securing the beams against unintentional lifting

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: omejena funkcionalnost, premer diska: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800 x 1,500 x 2,200 mm Lapping plate diameter 525 mm Maximum lapping ring width 175 mm Maximum workpiece size 170 mm Lapping plate speed 45/70/90/140 rpm Main drive power 4.0 kW Connection 400V/50Hz Kdjdpeh Invrsfx Af Teg Emergency stop switch Conventional control with operator panel Full-featured lapping machine, conventional control

Stanje: novo, High-quality bench drilling machine with top-class features. FLOTT TB 13 Plus MK II (212503) FLOTT TB 13 Plus B 16 (212500) Standard Features: - Tapping device - Control panel with OLED display - Robust, high-quality drill head cover with ergonomically inclined front - LED illumination - Quick-adjust, ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Emergency stop push button - Thermal overload protection - Spindle stop - Drill guard with electric interlock - Power cable with Schuko plug Kdodoi Hpyqspfx Af Teg - 3-year warranty for single-shift operation Technical Data: Max. drilling depth (mm): 60 Thread cutting capacity (depending on pitch): M10 Speed display: Digital Drilling depth display: Digital Drill depth stop: Clamping ring (positive fit) Feed (mm/rev): Manual Table height adjustment: Rack and pinion Motor 3-phase – frequency controlled, power supply 230 V (kW): 0.54 Continuous/normal drilling capacity (mm): 13/15 (in E335/ST60) Throat (mm): 220 Column diameter (mm): 70 Usable worktable surface (W x L) (mm): 300 x 250 Spindle/worktable distance (mm): 85-370 (table), 420 (base) T-slot size (arm), spacing (mm), width dimension (mm): Cross slots, quantity 2, 14/26 Machine dimensions without packaging (mm): 400 x 520 x 850 Machine dimensions with packaging (mm): 452 x 700 x 1,130 Weight (kg): 62 Note: All other models are available on request.

Stanje: novo, Leto izdelave: 2025, Yanigav Earth Auger TAMD245 • Easy three-point hitch • Very robust, welded, machine-manufactured chassis • Versatile, high-performance gearbox from 30 to 90 HP • Usable augers from 10 cm to 80 cm diameter and up to 1.80 m height • Offset of 1.30 m on each side of the axis • Chassis with a length of 245 cm • Auger not included Keder Eznijpfx Af Tsdg

Stanje: novo, Leto izdelave: 2025, The CORMAK ZX 40BPC is a robust drill-milling machine for metalworking. It features a spindle head rotation of +/- 90 degrees, spindle head tilting of +/- 90 degrees, automatic spindle feed, right and left spindle rotation, large working table, liquid cooling, and optional automatic longitudinal table feed (X-axis). It is equipped with a powerful two-speed 1.5 kW motor and allows for drilling up to 40 mm. Spindle speeds reach up to 3200 rpm. CORMAK Product Features: - Durability – All machines and tools are manufactured from the highest quality materials, ensuring longevity and reliability in operation. - Precision – Advanced production technologies provide precise operation, essential for accuracy in metalworking tasks. - Innovation – Technical solutions applied in these products improve operational efficiency and user convenience. CORMAK is a continuously growing brand, gaining new satisfied customers worldwide in both woodworking and metalworking sectors. Kedpfxjvxhfms Af Todg - Adjustable working flexibility – Thanks to the rotating head and height-adjustable design. - Threading function and reversible spindle – Enables increased versatility for various operations. - Precise depth adjustment – Via a three-arm handle and fine feed handwheel with scale. - Automatic spindle feed – For enhanced drilling precision and convenience. - Advanced oil-bath gearbox – Equipped with ground and hardened gears, ensuring smooth and durable operation. - Stable construction – Solid base guarantees secure placement and eliminates vibrations during operation. - High efficiency – Powerful motor ensures effective drilling even in hard materials. - Durable column – Precisely ground surface provides rigidity and operating accuracy. - Safety guard – Tilting clamp guard made of plexiglass for additional operator protection. - Heavy-duty cast column – Guarantees high working accuracy and long machine life. - Work table with T-slots (14 mm) – Allows quick setup of vises and other accessories. - Cooling system – Standard equipment for safe, efficient work during extended operations. Technical Specifications: Maximum Drilling Capacity (Steel/Cast Iron): 32/40 mm Max Face Milling Width: 80 mm Max End Milling Width: 22 mm Spindle Travel: 125 mm Spindle Taper: MT4 Number of Speeds: 12 Spindle Speed (rpm): 95-3200 (95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200) Max Distance from Spindle End to Table: 735 mm Max Distance from Spindle End to Base: 1245 mm Distance from Spindle to Column Surface: 272 mm Work Table Dimensions: 730x210 mm Base Dimensions: 690x520 mm Motor Power S1: 1.1/1.5 kW (1.5/2.0 PS) Motor Power S6: 1.7/2.2 kW (2.25/3.0 PS) Coolant Motor Power: 40 W Overall Dimensions (H with Base): 1200x1000x910 mm Weight: 380 kg

Stanje: rabljeno, Leto izdelave: 2001, ATS-CE 340/30 banding machine Banding machine with thermal sealing Kodpevthwfefx Af Tsdg Band width: 30 mm Suitable for paper and film as banding material Adjustable cooling time Extras: Jumbo roll dispenser 2 units available Price plus VAT, ex works. All information without guarantee. Subject to prior sale. Trade sale. Sale takes place with exclusion of any warranty.