Vertikalni obdelovalni center

Ixion BAZ 325

Stanje: rabljeno, diameter various quantity 56x Itjdpfx Aowtrzyof Tjb mounting BT 40

Leto izdelave: 2000, Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6,000 rpm, spindle power: 8.5 kW, tool holder: SK40, tool magazine capacity: 22 stations, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control unit: Heidenhain TNC 426. An on-site inspection is possible. Isdpfx Ajv Uqb Nsf Totb

Stanje: dober (rabljeno), Leto izdelave: 1997, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 750 mm, pomik po osi Z: 750 mm, CNC control: Heidenhain TNC426 30-slot tool changer Electronic handwheel Chip conveyor Coolant system Technical data: Travel X / X-axis travel: 1000 mm Travel Y / Y-axis travel: 750 mm Itjdpfx Aoua S Hrof Tsb Travel Z / Z-axis travel: 750 mm Table size: 1150 x 700 mm Spindle taper: SK40 Spindle speed range: 12000 rpm Number of tool stations in ATC: 30 Machine weight approx.: 10,500 kg Technical data, accessories, and machine description are non-binding.

Stanje: rabljeno, Diameter various. Itodpfewpln Eox Af Tsb Quantity: 72x Holder: SK 40

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, CNC: HEIDENHAIN 530 Drilling diameter: Ø 32 mm Drilling length: 1,000 mm X-axis travel: 2,000 mm (table) Isdpfx Aovznyisf Totb Y-axis travel: 800 mm (vertical) Z-axis travel: 2,000 mm (column, T-structure) Table dimensions: 1,500 x 1,000 mm Table load capacity: 7/10 tons Indexing angle: 360° Milling spindle: SK40 M30, 200 cm³/min Motor power: 11 kW Spindle speed: 6,000 rpm Tool changer: 24 positions Machine dimensions: 5,600 x 5,000 x 3,320(h) mm Coolant pump: 100 bar

Stanje: rabljeno, Technical details: Tool holder type: BT 40 Isdpevfdr Nofx Af Tetb Tool clamping system: Chuck Tool clamping system: Thermal shrinking Large selection of BT 40 tool holders available, including Weldon, collet chucks, collets, thermal shrink holders, end mill holders, shell mill holders, face mill holders, etc.

Stanje: dober (rabljeno), Leto izdelave: 2008, CNC Deep Hole Drilling Center Machine Type: Degen UTB800/G Control: Heidenhain TNC310 Year of Manufacture: 2008 TECHNICAL SPECIFICATIONS: Travel Paths: X-axis: 630 mm Y-axis: 400 mm Z-axis: 800 mm W-axis: 600 mm Feed Rate: 6,000 mm/min Swivel Range: Z: +/- 10° Table Size: 1,100 x 650 mm Max. Table Load: 2,000 kg Tool Holder: HSK 63 Max. Spindle Speed: 4,000 rpm Drive Power: 7.5 / 5.5 kW Drilling Diameter: 4-25 mm Equipment / Accessories: Electronic Handwheel High-pressure Pumps Internal Coolant Supply (IKZ): 0-90 bar Iedpfxjwxaf Rj Af Tstb Coolant Tank: 600 l Paper Belt Filter

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 7.647 h, potovalna razdalja osi X: 2.300 mm, pomik osi Y: 800 mm, pomik po osi Z: 850 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, skupna masa: 18.500 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 26.500 W, teža orodja: 10.000 g, število osi: 5, This 5-axis HEDELIUS T8 - 2300 was manufactured in 2006 and stands out as a robust vertical machining center. It offers a large travel range of 2300/800/850 mm and a high spindle speed of up to 12,000 rpm. The machine comes equipped with an NC swivel head for the B-axis, a tool magazine with 40 positions, and supports a maximum workpiece weight of 2,500 kg. Consider the opportunity to purchase this vertical machining center HEDELIUS T8 - 2300. Contact us for further information. • NC swivel head, B-axis: +92° / -92° Itjdpfxox E Ebws Af Tjb • Maximum pendulum movement: 2 × 850 mm • Rapid traverse: 60 m/min • Feed force: X/Y 5,000 N, Z 9,000 N • Spindle: • Maximum torque: 158 Nm • Front spindle bearing diameter: 70 mm • Tool clamping (drawbar force): 12 kN • Tool magazine/changer: • Tool stations (standard): 40 • Tool stations (Magnum): 80 • Max. tool diameter: 125 mm (180 mm with adjacent stations empty) • Max. tool length: 330 mm • Tool change time (approx.): 3.5 s • Chip-to-chip time: vertical 6.0 s / horizontal 6.5 s • Table/capacity: • Fixed table (L×W): 2,000 × 920 mm • T-slots: 6 × 18 H12 • Rotary table: 1 × 18 H8 • Max. workpiece weight: 2,500 kg • Machining capacities: • Drilling in St 52 with carbide: 40 mm • Tapping: M24 • Milling in St 52: 500 cm³/min • Distances (reference): • Z-axis travel vertical (L2): 850 mm • Spindle nose to swiveling axis (L3): 300 mm • Spindle nose to table surface (L4): 40 mm • Z-axis travel horizontal (L5): 1,000 mm • Spindle axis to table surface (L6): 210 mm • Y-axis travel (L7): 800 mm • Table center to travel start/end (L8/L9): 400 / 400 mm • Power/weights: • Total connected load: 25 kVA • Machine weight (standard): approx. 17,000–17,500 kg • Operating hours: • Operating hours: 21,100 h • Spindle hours: 7,647 h Additional Equipment • Chip conveyor • Internal coolant supply through the spindle, 40 bar • Paper band filter • Oil and emulsion mist separator • Swiveling inspection windows (2) • Cleaning guns (2) • Renishaw probing system Technical Specification: Taper size SK 40

Stanje: novo, This is a new machine manufactured in Romania by the company Emsil. Customer-specific requirements can be accommodated, depending on technical feasibility, and are reviewed in advance by the manufacturer's engineering department. About the spindles: The Narwhal is equipped with a boring spindle made from hardened, tempered, and alloyed steel. It features preloaded angular contact precision ball bearings. Additionally, the machine is fitted with a milling and boring bar capable of handling exceptional performance and torque. The bar is constructed from nitrided, alloyed steel and also utilizes preloaded angular contact precision ball bearings. Its movement occurs on bronze guide bushings. Both unit clamping mechanisms, responsible for securing and releasing the ISO 50 tool holder taper, operate fully automatically. Rotary Table: Table rotation is achieved via a twin pinion gearbox, a centrally supported shaft, and a hydrostatic sliding block for the central bearing, all engineered to guarantee maximum precision even with heavy, unbalanced loads. A recirculating ball system is used for the X axes. Both axes feature a direct measuring system. CNC Axis Control: All nine axes of the machine are permanently monitored. The monitoring system includes a 15'' TFT screen, operator panel, remote diagnostics which alerts the user in case of any errors, user memory, network connectivity, remote process control, integrated PLC, and more. The machine is compatible with various control systems such as Heidenhain, Fanuc, Siemens, etc. You select the sizes for the machining X/Y and Z axes: from 1200–3500 / 1000–3500 / 400–1500 mm as required! Best regards. Itjdpeu Id H Aofx Af Teb

Stanje: rabljeno, Diameter various Quantity: 36x Holder: BT 40 Itedpfx Afjww Nb Ej Teb