Vakuumski sušilni stroj
Italvacuum Cosmodry System IHD 3200

Name: Italvacuum Cosmodry System IHD 3200
Brand: Italvacuum
Availability: InStock

Leto izdelave

2016

Stanje

Rabljeno

Lokacija

Janville

Vakuumski sušilni stroj Italvacuum Cosmodry System IHD 3200

Podatki o stroju

Oznaka stroja:: Vakuumski sušilni stroj

Proizvajalec:: Italvacuum

Model:: Cosmodry System IHD 3200

Leto izdelave:: 2016

Stanje:: rabljeno

Cena in lokacija

Lokacija:: Janville, Francija

Pokliči

Podrobnosti ponudbe

ID oglasa:: A20864772

Referenčna številka:: 12261

Posodobitev:: nazadnje dne 12.05.2026

Opis

// Demontiertes und eingelagertes Equipment in unserem Lager //
Dkedpsx R D Efsfx Ag Sst

Hersteller: Italvacuum
Modell: Cosmodry System IHD 3200
Baujahr: 2016
Typ: Horizontaler Vakuum-Paddeltrockner
Anwendung: Trocknung von feuchten Pulvern

ATEX (Eex) Einheit: ja
Einsatzbereiche: Feinchemie, Pharma (API), Zwischenprodukte

A) Rührwerk: Konzentrisches Rührwerk mit beheizter Welle, in mehreren Segmenten abnehmbar (doppelte Gleitringdichtung)
Antrieb: (CEMP) – Leistung 30 kW + Getriebe + Kette
Rührwerkdrehzahl: 1,6 ÷ 8,1 U/min
ATEX: explosionsgeschützt ATEX II 2GD
Montiert mit Trockner auf einer Trägerstruktur (Einzel-SKID)

B) Trocknungskammer mit Auslassventil
Gesamtvolumen: 3.200 Liter
Nutzvolumen: 30% – 80%
Innendruck: -1 / 0,5 barg
Manteldruck: 0 / 1,7 barg
Entwurfstemperatur: -10 / +130°C
Max. Heizmediumtemperatur: +100°C
Optimale Vakuumdichtigkeit: 4 mbar/h
EX-I Absolutdrucktransmitter
PT100 Ex-i Produkttemperatursensor
Stickstoff-Gegenspülungssystem
Rotierender Zerkleinerer: 300 / 1.200 U/min (nicht installiert)
Produktberührte Werkstoffe: AISI 316L - EN 1.4404
Vakuumdichtungen: PTFE und FEP
Mantelmaterial: AISI 304 - EN 1.4301
Heizmedium: Thermoöl
Innen: hochglanzpoliert (Ra ≤ 0,4 µm)
Außen: satiniert (Ra ≤ 1,2 µm)
Inspektions- und Absperrventil DN 1650
Sicherheitsventil DN 200/300
DN 250 Absperrklappe zum Befüllen
Vorrüstung für zwei Zerhacker (Seitenschneider)

C) Prozessfilter

D) Vakuumeinheit: SAURUS939 Kolbenvakuumpumpe, Modell VVD
Pumpenträgergestell
ATEX: Ex-d-IIB-T4 – IP55
Leistung: 11 kW
Oberflächenkondensator für Atmosphärendruck, Modell VD200I

E) Vakuum-Kondensiereinheit
- Edelstahl AISI 316L mit Doppel-Kühlmantel aus Edelstahl AISI 304
Auslegungsdruck innen: -1 / 0,5 barg
Mantelauslegungsdruck: 0 / 3 barg
Auslegungstemperatur: -10 / 40 °C
Max. Kühlmitteldruck: 2,5 bar
Wärmeaustauschfläche: 8,5 m²
Kondensatsammelvolumen: 900 Liter
Füllstandsensor

F) Externer Sicherheitsfilter

G) Temperatur-Regelsystem: Heizen/Kühlen
Dampf-Flüssigkeitserhitzer: Druck 7 bar – Manteltemperatur: 142°C – Fläche: 1,65 m²
Kühler, auf Erhitzer montiert: Kaltwasser oder Sole – Rohrmanteldruck: 12 barg – Manteltemperatur: 142°C – Rohrtemperatur: -10°C / +99°C – Fläche: 3,42 m²

H) Steuer- und Regelungssystem (Schaltschrank + HMI)

Vollständige technische Dokumentation vorhanden

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2023

275 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+33 2 37 ... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Industrijski roboti Schleifzelle mit Roboter Kuka KR 180

Częstochowa

609 km

Industrijski roboti
Schleifzelle mit Roboter Kuka KR 180

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, *Video je samo primer, kako se lahko pripravi to celico Celica z brusilnim robotom Kuka KR 180 Brusilna celica Berger 2012 (zunanje brušenje A1) - Skupna masa cca 6300 kg - Dimenzije celice: cca 4650 x 2400 x 3100 mm 6-osni robot Kuka KR 180 R2500 Extra - Leto izdelave 2011 Dkedpeg Saqvjfx Ag Sst - Krmiljenje KRC 4 - Dodatna os (7. os) Trakasta brusilna postaja BSS10 - max. dimenzije traku 3500 x 30 mm - max. premer kontaktnega kolesa 200 mm - Moč motorja 4 kW 2 x polirni postaji, - Premer polirnega koluta 350 - 600 mm - Moč 5,5 kW Omarica za menjavo prijemal Trakasti transporter Interoll Automation GmbH - Skupna dolžina cca 2000 mm - Širina traku cca 440 mm Imamo 4 takšne celice.

Poglej podrobnosti

Mali oglas

Uporablja se sušilnik za mešanje AVA / Holland Merten GmbH HTK 200

Sinsheim

572 km

Uporablja se sušilnik za mešanje
AVA / Holland Merten GmbHHTK 200

Pokliči

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), Product-contacting parts are made of stainless steel 1.4571, the remainder of the used mixer dryer is constructed from 1.4301. Machine designation: Used Continuous Horizontal Mixer Dryer Manufacturer: AVA / Holland Merten GmbH Dkedpjitcu Eofx Ag Sst Type: HTK 200 Year of manufacture: 2002 Speed: 107 rpm Material: 1.4301 Drive motor: 5.5 kW Design: EExdellCT4 Total capacity: 235 litres Product-contacting parts: stainless steel 1.4571 Features: double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1,600 kg Technical documentation: Yes Note: Operating temperature 130°C, design temperature 200°C, mixing vessel internal pressure -1/+3 bar, double jacket pressure +6 bar Accessories: base frame Condition: used Price: on request

Poglej podrobnosti

Mali oglas

Nemčija

650 km

Filter okvirja
SeitzOrion 60

Pokliči

Stanje: pripravljen za uporabo (rabljen), A Seitz filter machine, including a Schenk dosing device for beer production, is available. 1) Kieselguhr frame filter Seitz Orion 60, maximum throughput: 70 hl–80 hl/h, effective throughput: approx. 45 hl/h, maximum total filtration capacity: approx. 600 hl, pressing unit: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions (X/Y): 600 mm/600 mm, pipe diameter: 50 mm, nominal width: NW50, machine dimensions (X/Y/Z): approx. 3800 mm/1100 mm/1400 mm. 2) Schenk dosing unit DO-S120, year of manufacture: 1971, capacity: approx. 160 l/h, high-speed capacity: approx. 320 l/h, nominal width: NW50, pipe diameter: 50 mm. Documentation available. On-site inspection possible. Dkodpfjwd Talex Ag Set

Poglej podrobnosti

Mali oglas

Freilassing

243 km

Tračna stiskalnica
ISARISP 950

17.990 €

Fiksna cena plus DDV

Pokliči

Leto izdelave: 2026, stanje: novo, Our belt presses are equipped with two large pressing rollers, which extend the pressing process and ensure exceptionally gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tensioning system and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially developed water nozzles. Only a compressor with 8 bar pressure and a ½” water connection are required for cleaning. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information • Rated capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless belt speed control • User-friendly operation • Easy to clean • Mobile machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Feed height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Options: Dedev Sq S Nepfx Ag Sskt Juice collection tray ISW 100 Automatic juice discharge

Poglej podrobnosti

Mali oglas

Vakuumska sušilna komora, sušilnik s grelnimi ploščami ISVE 1,5

Karben

647 km

Vakuumska sušilna komora, sušilnik s grelnimi ploščami
ISVE1,5

Pokliči

Mali oglas

Misterton

1.392 km

Rezervoar za čokolado
Macintyre750Kgs

Pokliči

Mali oglas

Burbach

722 km

Majhen obrat z robotom Qirox
Cloos

Pokliči

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Cloos welding robot Qirox QRC 320 including V 6 controller, Pedestal for upright installation, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 1 rotary tilting table WPK 5000, load capacity 500 kg, Dksdpfsizwv Nsx Ag Sjt 1 pre-selection start, 1 control for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor The system will be completely overhauled and serviced before delivery. A second station with an additional identical rotary tilting table is possible.

Poglej podrobnosti

Mali oglas

Cegléd

384 km

Kompletna žaga
Costa Multiprisma

239.900 €

Fiksna cena plus DDV

Pokliči

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, For sale: Complete sawmill operation The line starts with a Bongioanni band saw and a Costa Multiprisma saw. Designed for processing both soft and hardwood deciduous species. The price includes the entire machinery lines, auxiliary equipment (such as dust extraction and waste recycling machines), all necessary saw blades and spare parts. The sawmill can be inspected in Cegléd, Hungary by prior appointment. 1. Production Line: - 1-1 Log yard with log singulator - 1-2 Costa Multiprisma 280: twin-shaft canting and log rotator, throughput 60-80 m³/8hrs depending on wood type and diameter - 1-3 Roller conveyor with ejector - 1-4 Custom-built cross-cut saw: single sizing with adjustable cutting sizes - 1-5 Belt conveyors for bulky waste transport - 1-6 Drum chipper - 1-7 Chipper conveyors: screw conveyor, bucket elevator, chute, direct loading onto trolley/truck Dkodpfxov Hm T Se Ag Sot 2. Second Line: - 2-1 Log storage with singulator - 2-2 Log conveyor with ejector - 2-3 Intermediate log yard with singulator - 2-4 Bongioanni log band saw with carriage, 1300mm, digital control, pre-set size options, blade deviation indicator, laser guide, 25-45 m³/8hrs (depending on wood type, diameter and sawing pattern) - 2-5 Roller conveyor with ejectors - 2-6 Cross transfer conveyor with singulator - 2-7 Storti TGS-78 cross-cut saw: digital control, three saw units for double-size cutting ability - 2-8 Roller conveyor with grading sections - 2-9 Intermediate cant storage - 2-10 Roller conveyor - 2-11 Costa Leopard II edger, 2-shaft with automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Belt conveyors for bulky waste - 2-14 Drum chipper - 2-15 Chipper conveyors: screw conveyor, bucket elevator, walking floor for truck loading 3. Auxiliary Equipment: - 3-1 E. Gillet resaw, with conveyors, manipulator, and infeed unit - 3-2 Joinery bandsaw (800 mm) - 3-3 Pallet block cross-cut saw (star wheel type) - 3-4 SOCOLEST Valdoi twin edger circular saw with conveyors and cross-cut circular saw - 3-5 VEB STANDARD single-shaft panel saw - 3-6 STVO single-shaft panel saw

Poglej podrobnosti

Mali oglas

Dvojni tračni brusilnik Weiz GmbH DBSM-3.500-4

Kürten

787 km

Dvojni tračni brusilnik
Weiz GmbHDBSM-3.500-4

Pokliči

Leto izdelave: 2023, stanje: novo, We are selling a new double belt grinding machine. The contact wheels are available in various dimensions. Technical data: Weight: approx. 350 kg Electrical connection: see nameplate of the respective drive motor Compressed air connection: 3 - 8 bar Dodpok D Ex Tjfx Ag Sekt Noise level: > 85 dB(A) Contact wheels: max. Ø 350 mm x 110 mm Abrasive belts: max. 120 mm x 3500 mm length Extraction connection: Ø 160 mm If you have any further questions, please feel free to contact us!

Poglej podrobnosti

Mali oglas