Stiskalnica za furnir

ITALPRESSE SCF/8-S

Stanje: zelo dobro (rabljeno), SCM F520 CE Jointer Working width: 520 mm Hodsndhdtspfx Af Tsng Motor power: 4 kW 4-knife cutterhead Traditional knives Hydraulic lifting and lowering of the worktable Main fence adjustable up to 45° Table length: 3000 mm CE certification

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 1.200 h, Funkcionalnost: popolnoma funkcionalen, Razrezovalka plošč Holzma HPP 380 Profiline z avtomatskim etiketirnikom. Hodpfx Asxytlkef Tjng

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 9 kW (12,24 KM), Ott veneer press Connection value: 380V 9kW Hjdpotwp Iwofx Af Tong Plate size: 2250 x 1350 mm Elkom heating plates, gold-anodized Plates and hydraulics in good condition

Stanje: novo, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtanschlussleistung: 77,12 kW Motorleistung erste Einheit: 22 kW Motorleistung zweite Einheit: 30 kW Motorleistung dritte Einheit: 18,5 kW Schleifbandabmessungen: 1330x2200 mm Arbeits-Luftdruck: 0,55 MPa Hnjdped H Sc Eofx Af Tog Absaugleistung: 12.000 m³/h Transportmaße (LxBxH): 3090x2020x2260 mm Gewicht: 4.700 kg

Stanje: rabljeno, težka skobeljna SCM F 520 Hjdpfxoxzdgus Af Tsng Širina skobljanja 520 mm Dolžina mize 2.960 mm hidravlično nastavljanje višine dovajalne mize z nožnim pedalom, z mikrometrskim prikazom odvzema ostružkov varnostni 4-nožni rezalni valj nastavitev spojnih robov (ravnih in konkavnih) glavni motor 4 kW električna zavora motorja Izvedba CE Stroj je DELOVNO SPOSOBEN v DOBREM STANJU, iz poklicne šole Na zalogi v Liebochu

Stanje: rabljeno, Leto izdelave: 2016, TECHNICAL DATA AXES Max. Workpiece Dimensions X-Y-Z mm: 3050 x 800 x 50 Min. Workpiece Dimensions X-Y-Z mm: 300 x 90 x 10 Working Area Drilling/Grooving mm: 0 x 800 / 0 x 800 X-Axis Stroke mm: 750 Max. Traverse Speed X-Y Axes m/min: 25 DRILLING UNIT Vertical Spindles: - Number: 7 (4X-4Y, one shared) Horizontal Spindles (along Y-axis): - Number: 2 (1+1) Horizontal Spindle (along X-axis): - Number: 1 Fixed Grooving Saw (Direction): X Saw Blade Diameter mm: 100 Max. Saw Blade Thickness mm: 5 Motor Power kW (HP): 1.5 (2) Spindle Speed rpm: 3350 Saw Blade Speed rpm: 4300 INSTALLATION Power Supply V (Hz): 380 / 400 (50/60) Installed Power kVA: 4.5 Compressed Air Requirement bar: 6 Compressed Air Consumption Nl/cycle: 90 Extraction Requirement m³/h: 1200 Extraction Air Speed m/sec: 20 Extraction Port Diameter mm: 80+80 F10L Drilling Unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles: 32 mm - 2 horizontal drilling heads: 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill holder D10 mm) - Speed: 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed: 4300 rpm - Motor power: 1.5 kW - Vertical pneumatic stroke per spindle: 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece Positioning and Drive of the Working Unit A CNC-controlled vacuum suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along the X and Y axes is via THK rails with transmission on reinforced toothed belts. Movement in the Z axis is pneumatic on ball bushing guides, with stops adjustable via the end position. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system is specifically designed for use in drilling and milling machines. - CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and any faults or errors displayed in the operator's language Programming - Programmed via CN - Automatic optimization of drilling operations - Option for plate zero-point shift - Option to save and import drilling programs via USB dongle - Option to import drilling programs from external CAD-CAM software Hnjdpfx Afsvvi I Rs Tjg Configuration - User interface in the same language as the operating manual - Graphic display of aggregate configuration Vacuum Suction Cup "B-Power" vacuum suction cup with dual vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine Operating Interface Software: Xilog Maestro USB Hardware and Software Requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min.; multicore processor recommended - Memory: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The package includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphical programming - Supported programming with graphical and syntax aids for drilling operations - Ability to create and save machining macros Integrated Additional Functions - Self-diagnosis and error reporting in the operator's language - User interface in

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: The machine was operated in Germany and regularly maintained (last maintenance by Homag in 11/2024) Equipment and technical data: Workpiece thickness min.: 12 mm Workpiece thickness max.: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) Edge thickness min.: 0.3 mm (coil material) / 0.4 mm (strip material) Edge thickness max.: 3 mm (coil material) / 20 mm (strip material) Feed speed: steplessly adjustable 18–25 m/min (frequency controlled) Type of glue: EVA hot-melt adhesive Glue application (tank / cartridge / nozzle): melting unit with granulate hopper Glue volume / cartridge size: granulate hopper, melting capacity 18–35 kg/h, level-regulated Heating-up time: approx. 8–10 min Edge magazine (slots): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, manually switchable) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: trimming unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush trimming: via pre-milling unit, pneumatically adjustable Radius trimming: profile trimming unit FK13, automatic 8-position tool changer (R = 2 mm) Bevel / profile trimming: yes, via FK13 pneumatically adjustable Scraper: integrated in multi-finish unit MN21 Polishing: buffing unit in the finish unit FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Hedpfjwx Aaqox Af Tsng Separating agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: several Ø 100 mm (individual extraction per aggregate) Control: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EU directive 98/37/EC Dimensions / space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor shown in the pictures is not included in the scope of delivery! Availability: short-term Location: Lithuania

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Complete plywood panel production line including: - 1 BUERKLE composing line (year 1991) with BUERKLE roller gluer (length 3400 mm) + 1 OLM longitudinal strand conveyor + 1 OLM cross strand conveyor + 1 assembly table. - 1 press loading rack with 10 positions. Hnedpfsul Uizsx Af Teg - 1 BVH 10-level hot press with thermic oil heated platens. - Platen size: 3700 x 1900 mm - Platen thickness: 40 mm - Opening between platens: 75 mm - 1 central hydraulic cylinder D700 mm, max. hydraulic pressure 315 kg/cm² - 1 press unloading rack with side ejection pushers on a lift table. Line currently in operation, available second half of 2025.

Stanje: novo, Leto izdelave: 2024, ♻ MONSTER je hibridni stroj sestavljen iz PRED-DROBILNIKA P150 TWIN (z dvema reduktorjema), v kombinaciji z DROBILNIKOM SD90XL. Drobilnik MONSTER je sinonim za učinkovito drobljenje različne vrste palet, stiroporjev, plastike, odpadkov in električnih naprav. Hodpfx Aehwwplef Tjng ✔ Moč: 30 kW + 1x 5,5 kW-9,2 kW (drobilnik + preddrobilnik) ✔ Dolžina rotorja: 870 mm + 1580 mm (drobilnik + preddrobilnik) ✔ Premer rotorja: 270 mm + 355 mm (drobilnik + preddrobilnik) ✔ Hitrost rotorja: 80-120 + 5,3-10,3 rpm (drobilnik + preddrobilnik) ✔ Število nožev: 2x19 + 12/12 (drobilnik + preddrobilnik) ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 60 palet/h* ✔ Material: Palete, stiropor, elektronski odpad, plastika, les,... ✔ Vsipna odprtina: 2072 x 1070 mm ✔ Dimenzije D/Š/V: 3,73/1,78/2,67 m ✔ Teža: 4200 kg 2 leti garancije ali 2000 delovnih ur

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted Hedpfsc Tmygex Af Tsng End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)