NOVE BATERIJE IPC GANSOW 1010E

IPC Gansow 1010 E - 2014Bj - 63h - 5600m²/h

Stanje: novo, Pressure: 30 t Stroke: 350 mm Table working area (width): 750 x 260 mm Pressure: 221 bar Oil capacity: 37 dm³ Maximum working speed: 9.8 mm/sec Return speed: 14 mm/sec Total power requirement: 3 kW Machine weight: approx. 385 kg Cylinder inner diameter [mm]: 130 Piston rod diameter [mm]: 55 Ncsdpfx Abei A S I Debsl Piston bottom diameter [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Height-adjustable worktable - Joystick for piston and speed control The workshop press (30T) features a fixed cylinder and a motorized, height-adjustable worktable. It is equipped with pressure regulation, a pressure gauge, variable speed settings, and a joystick for controlling the piston movement and speed. The joystick allows both vertical piston movement and speed adjustment, making this motorized hydraulic press ideal for precision work.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1845/455, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components Grinding Wheel Headstock Disassembly, cleaning of components, replacement of worn and defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings plus adjustment. New paintwork. Workpiece Headstock Disassembly, cleaning of components, replacement of worn and defective parts, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of components, replacement of worn and defective parts, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal Grinding Attachment Disassembly, cleaning of components, replacement of worn and defective parts, assembly of support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, replacement of hoses, worn and defective parts. Check hydraulic manifold. X Axis Disassembly, replacement of worn components such as O-rings, seals, segments, etc., overhaul of hydraulic cylinder, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring System 2-axis digital readout included Ncjdpfsxt Ilfex Abbsl Electrical Cabinet Replacement of motor contactors and relay controls. New wiring. New variable frequency drive for workpiece headstock. TECHNICAL SPECIFICATIONS Centre distance 1500 mm Centre distance, headstock to overhanging tailstock 1650 mm Centre height, standard 125 mm Centre height with riser block 225/250 mm Maximum grinding diameter Ø 250 mm Maximum grinding diameter with risers 450/500 mm Table Usable surface 2060x140 mm Maximum length and width for surface grinding 1750x200 mm Manual or hydraulic longitudinal travel 1750 mm Manual table movement, 1 handwheel revolution – coarse 20.006 mm Manual table movement, 1 handwheel revolution – fine 2.457 mm Table speed, stepless, hydraulic –6 m/min Table swivel 6° Stop, return 0–5 sec. Workhead Spindle Workpiece speed, stepless electric 20–400 rpm Swivel 360° Internal taper of workhead spindle MT5 Tailstock Internal taper of tailstock spindle MT3 Quill retraction, manual or hydraulic 30 mm Internal taper for diamond dresser MT0 Universal Grinding Head Transversal slide stroke (grinding wheel) 285 mm Rapid traverse of grinding wheel slide, forward and back 40 mm Grinding spindle speeds 1500 – 1700 – 2200 – 3600 rpm Vertical movement of grinding spindle, centre height 125–330 mm Grinding wheel for cylindrical grinding, max 400x50x127 mm Grinding wheel for surface grinding, max 250x20x76 mm Swivel angle of grinding head, lockable every 90° 270° Wheel feed 1 division of vernier 0.005 mm/Ø Automatic feed, max 0.9 mm/Ø Motors Grinding spindle motor 2,900 rpm / 4.0 hp Workhead spindle motor 3,000 rpm / 2.0 hp Coolant pump motor 2,850 rpm / 0.12 hp Internal Grinding Attachment Bore 70 mm Internal grinding spindle speed Ø70 mm 14,000 rpm Internal grinding spindle speed Ø50 mm 21,000 rpm Unless stated otherwise, technical data is provided without guarantee and subject to errors or omissions.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Workpiece weight max. (fly): 130 kg including clamping Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Picture of a previously delivered machine. - Operation via touch panel is extremely simple. - The symbols on the control panel are nearly identical to the original system, so no extensive retraining required. - Diagnostic function with display of PLC messages and digital I/Os. - Dressing function can be expanded or modified per customer request. - Oriented spindle stop for workpiece spindle available on request. - New maximum infeed amount: 40 mm (can be optionally increased). - Digital readout on 2 axes. X-axis resolution: 0.5 μm Options: Ncedpfx Asuxfupobbsl - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding spindle headstock (no height adjustment with spindle possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Collet tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system (X-axis) with stepper motor drive. Hydraulic table traverse and rapid feed. Versatile application in production for external and internal cylindrical grinding, or for combined external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control system The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety targets must be determined by a risk assessment according to BetrSichV.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Centre height: 181 mm Centre distance: 1000 mm Max. grindable workpiece diameter: 360 mm Max. cantilever load: 1000 N (100 kg) Max. load between centres: 3000 N (300 kg) Nedpfstqf Rzjx Abbecl Z-axis: Table swivel angle: 10° Hydraulic table drive: 0-4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Feed drive via DC motor Rapid feed speed: 48 mm/min/Ø Feed operation: Plunge grinding / longitudinal grinding 4 presettable feed rates mm/min/Ø: 0.01-48 4 presettable feed amounts mm: 0.001-0.1 Sparkout during form grinding: 0-99 s / 0-99 strokes Tip feed mm/Ø: 0.001 Grinding spindle head: Universal, swiveling 0-180° Grinding wheel (external): D x w x d mm: 500 x 100 x 127 or 203.2 Grinding wheel (face; option): D x w x d mm: 250 x 32 x 76.2 Grinding wheel (internal; option): D mm: (2-250) Drive power – external/face: 5.5 (7.5) kW Drive power – internal: 2.2 kW Peripheral speed – external: 35 (50) m/s Grinding wheel wear (external): 160 mm/Ø Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30-270 / 50-450 Workpiece spindle lockable Spindle mount: Mk 4/24 mm Spindle nose for flange mounting: Mk 4, cylindrical Ø63H6 x 6 mm Workpiece spindle head swivels on rotary part: 0-90° Tailstock: Quill mounting/quill diameter: Mk 4/750 mm Quill stroke: 45 mm Quill force: 100-800 N / 250-1400 N adjustable Quill operation: manual (foot switch) Fine quill adjustment: ±40 µm Connection values: Total machine connected load: 6.5-10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump for guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic reservoir: 80 L Pneumatic system: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Stanje: rabljeno, Leto izdelave: 2003, Grinding diameter 450 mm Grinding length 1500 mm Centre height 225 mm Photos show a nearly identical machine with 1000 mm length Also geometrically overhauled and partially repainted. 1x grinding wheel assembly LEFT 500x80x203.2 mm 1x grinding wheel assembly RIGHT 400x63x127 mm 1x internal grinding device Ø120 mm for 2 high-frequency spindles (motor and HF spindle) Centre height 225 mm Grinding head motor: drive power 9.2 kW B-AXIS: CNC-controlled B-Axis KELCO 120: v constant 35 m/s or 45 m/s_adjustment of grinding spindle speed via control_(standard) Semi-automatic balancing device, ELASO, type EB 500 MFV 1230: high-speed internal grinding spindle with oil-air lubrication High-performance motor spindle M34-FAVY100.R620-20/4, lifetime grease lubrication Balancing arbor Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock Micrometric adjustment at the tailstock Pneumatic relief for the tailstock Tailstock park position Standard workpiece headstock MK5 CNC-controlled C-Axis for standard workpiece headstock Sine bar for direct angle measurement using gauge blocks Large adjustment, swiveling base for standard workpiece headstock Reinforced workpiece headstock MK5 CNC-controlled C-Axis for reinforced workpiece headstock Fixed base for reinforced workpiece headstock Coolant supply through the workpiece spindle Dressing device on the lower table - with 2x 0053.05 and 2x 0053.20, behind the workpiece spindle stock and tailstock Njdjxflcropfx Abbjcl Dressing device on the upper table, with Pos. 1x 0053.01, 1x 0053.03, 1x 0053.13 Prepared for later connection of HF dressing device for rotary dressing tools (RENAUD) Adjustment plate for universal use of HF dressing device internal+external KELPOS: active longitudinal positioning MOVOMATIC, GAP: infeed sensor MOVOMATIC KELSET: tool measuring system KELSET, MARPOSS 1900 litre: continuous belt filter, with lifting station, 100 l/min at 2.0 bar, designed for 2 machines Full enclosure Enclosure with inspection doors left and right Electrical interlock for the side door (grinding wheel change) Preparation for customer-side connection of a grinding mist extraction system Cooling unit for water circuit cooling (grinding head and HF spindle) Control cabinet lighting with door switch Data as per delivery note. Data without guarantee.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Leto izdelave: 2011, obratovalne ure: 35.623 h, številka stroja/vozila: A1225A0041 / L20, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, proizvajalec krmilnikov: Siemens, model krmilnika: SINUMERIK 840D SL, vrsta laserja: CO₂ laser, proizvajalec laserskih virov: Trumpf TruFlow 3200, laserske ure: 35.623 h, laserska moč: 3.200 W, valovna dolžina laserja: 10.600 nm, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 20 mm, maks. debelina pločevine iz nerjavečega jekla: 12 mm, maks. debelina aluminijaste pločevine: 8 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, delovna višina: 115 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 115 mm, hitrost pomika os X: 100 m/min, hitrost podajanja osi Y: 200 m/min, hitrost podajanja os Z: 80 m/min, hitrost rezanja: 140 mm/min, hitrost pozicioniranja: 140 m/min, natančnost ponavljanja: 0,05 mm, teža obdelovanca (maks.): 900 kg, moč: 3,2 kW (4,35 KM), vhodna napetost: 400 V, vhodni tok: 100 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Enosmerni tok, vrsta hlajenja: voda, skupna masa: 12.000 kg, skupna dolžina: 6.500 mm, skupna širina: 7.600 mm, skupna višina: 2.200 mm, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, odsesavanje prahu, varnostna svetlobna zapora, Stroj je bil do leta 2023 v vzdrževalni pogodbi s podjetjem Trumpf in je bil vzdrževan izključno s strani podjetja Trumpf! Tehnični podatki: - Laserska moč: 3.200 W (3,2 kW) CO2 laserski vir (TruFlow 3200) Nodpoxc E Rqsfx Abbjcl - Delovne ure: NC krmiljenje: 35.623 ur Resonator / Črpalka 1: 34.258 ur Žarek vklopljen / Črpalka 2: 10.155 ur - Delovno območje (X/Y/Z): 3000 mm x 1500 mm x 115 mm - Največja debelina pločevine: Konstrukcijsko jeklo: do 20 mm Nerjavno jeklo: do 12 mm Aluminij: do 8 mm - Dovodne hitrosti: X-os: 3.000 mm/min Y-os: 1.500 mm/min Z-os: 115 mm/min - Pozicionirna hitrost X/Y: 140 m/min - Najmanjši programabilni korak: 0,001 mm CNC krmiljenje: Siemens SINUMERIK 840D SL

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 2.587 h, The Tennant 6100 is a compact, battery-powered sweeper that efficiently collects dust and debris thanks to a powerful integrated vacuum unit and multi-stage dust control. This sweeper features a 76 cm sweeping path, including the side brush, and is designed for effective cleaning both indoors and outdoors on hard floors and even carpeted surfaces. This makes the Tennant 6100 versatile and suitable for locations such as warehouses, shopping centres, and parking garages. With a cleaning capacity of up to 6,100 m² per hour and a battery life of up to 3 hours, the machine can last an entire workday without recharging. The sweeper uses an over-throw sweeping system to process debris, making it effective for collecting various types of light and medium-duty debris. Furthermore, thanks to its compact design, the Tennant 6100 is easy to manoeuvre in tight spaces and fits through standard doorways as well as in passenger elevators, making it ideal for multi-level facilities. Nsdpou Iwavofx Abbocl Additionally, the Tennant 6100 is equipped with an 85-litre manual debris hopper, which is easy to empty, and intuitive controls for operator-friendly use. The battery-powered operation also ensures low-noise and emission-free performance, making this machine suitable for busy and sensitive environments. Further specifications: - Theoretical capacity: 6,100 m²/h - Main brush sweeping width: 56 cm - Sweeping width with 1 side brush: 76 cm - Side brush diameter: 41 cm - Debris hopper capacity: 85 L - Power source: 36V Battery - Battery run time: approx. 3 hours - High-dump system: No - Dump height: Manual - Filter type: Panel filter - Filter area: 3.1 m² - Maximum climbing gradient: 14% - Maximum speed: 8 km/h - Traction: Rear-wheel drive - Filter shaker: Manual - Weight (incl. batteries): 503 kg - Dimensions (L x W x H): 152 x 81 x 118 cm Would you like to know more about the Tennant 6100 or see it in action? Please contact us—our consultants will be happy to provide further information!

Stanje: rabljeno, Abstand zwischen den Spitzen: 1000 mm Spitzenhöhe: 250 mm B-Achse: Genauigkeit 0,1" CNC Marke: Kelco CNC Modell: 90 Abmessungen linke Schleifscheibe (außen x innen x Breite): Ø400 x Ø127 x 63 mm Abmessungen rechte Schleifscheibe (außen x innen x Breite): Ø400 x Ø127 x 50 mm Werkstückspindel Schwenkbereich: -30º bis +120º Spitzenaufnahme Werkstückspindel: MK 5 Max. Werkstückgewicht zwischen Spitzen: 150 kg Reitstockaufnahme: MK 4 Reitstockpinolenhub: 50 mm Max. Umfangsgeschwindigkeit: 32 m/s Hochfrequenz-Innenschleifspindel: Ø120 mm Marke der Hochfrequenz-Innenschleifspindel: WARNER Modell K 3.000 Hauptantriebsleistung: 7,5 kW Gesamtleistung: 26,5 kW Max. Verfahrweg Z-Achse: 1.150 mm Max. Vorschubgeschwindigkeit Z-Achse: 15 m/min Drehtischbereich: 0º bis 9º Max. Verfahrweg X-Achse: 320 mm Nedpoxmg Eksfx Abbscl Max. Vorschubgeschwindigkeit X-Achse: 7,5 m/min Länge: 3.600 mm Breite: 2.000 mm Gewicht ca.: 5.000 kg

Stanje: dober (rabljeno), Leto izdelave: 2006, proizvajalec krmilnikov: ELGO, delovna širina: 3.000 mm, najv. debelina pločevine: 10 mm, najv. debelina jeklene pločevine: 10 mm, maks. debelina pločevine iz nerjavečega jekla: 6 mm, zadnji prislon: 1.000 mm, moč: 14,9 kW (20,26 KM), skupna masa: 10.500 kg, Oprema: dokumentacija / priročnik, kotni ventil, nujno zaustavitev, varnostna svetlobna zapora, zaščita prstov, Z napravo za držanje pločevine. Ncsdpfxowz Iulo Abbol

Stanje: rabljeno, prevoženi kilometri: 1.264.000 km, vrsta goriva: dizel, gorivo: dizel, vrsta prenosa: samodejen, emisijski razred: Euro 5, Leto izdelave: 2013, Oprema: klimatska naprava, Three-axle truck with fixed flatbed, automatic transmission, air conditioning, hydraulically steered third axle, 1,264,000 km, payload capacity 12,100 kg. Ncedpfxovx Uh Is Abbel Effer 250.CL/2S crane, year 2013, lifting capacity 8,140 kg, last periodic inspection on 14/06/2024, radio remote control.