Krmilna enota

INDRAMAT

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, spindle moulder with tilting spindle, model SCM T160 L’Invincibile Predsvzghrspfx Agpod used machine electrical spindle tilt -5° / +45° electric spindle height adjustment motor power 5.5 HP spindle diameter 50 mm voltage 380V/50Hz net weight 1,000 kg

Stanje: zelo dobro (rabljeno), premer trna: 30 mm, Oprema: motorna zavora, SCM spindle moulder, model T130, with four-roller power feed unit, table size 1200x730 mm, maximum speed 10,000 rpm, spindle diameter 30 mm. Motor: 5.5 kW. For an additional charge, a spindle with 40 mm diameter can also be supplied. Pedpfet Rfn Esx Agperd

Stanje: dober (rabljeno), Weinig Hydromat H23 50 mm vretena, 6.000 obr./min Spodní frézka připravena, 15 kW Pravá frézka připravena, 11 kW Levá frézka připravena, 11 kW Pravá frézka připravena, 11 kW Levá frézka připravena, 11 kW Horní frézka připravena, 15 kW Spodní frézka připravena (rovinná frézka), 11 kW + ložisko na konci hřídele Horní frézka připravena (rovinná frézka), 11 kW + ložisko na konci hřídele Spodní frézka připravena, 15 kW Možnost dodatečného osazení dalšími rovinnými nebo profilovými frézami dle potřeby! Motor posuvu 15 kW Automatický mazací systém Prjdpfowmw Nvox Agped Možnost dodání vstupního a výstupního dopravníku k hoblovce dle potřeby. Možnost nabídky nástrojů dle požadavku.

Stanje: zelo dobro (rabljeno), Four-sided planer Weinig Unimat 23 EL Working width: 230 mm Working height: 160 mm Cutterhead configuration: Bottom: 5.5 kW Right: 4 kW Left: 5.5 kW Right: 4 kW Top: 11 kW Bottom: 5.5 kW Top: 7.5 kW Bottom: 7.5 kW Feed speed adjustable via variator: 6–36 m/min Prsdpfx Agorb An Uspod Feed powered by cardan shaft Feed rollers integrated in table Pneumatic pressure elements CE certificate Year of manufacture: 2003

Stanje: zelo dobro (rabljeno), Weinig Unimat 23 Four-Sided Planer Working width: 230 mm Working height: 140 mm Number of spindles: 7 Spindle arrangement: - Bottom: 7.5 kW - Right: 7.5 kW - Left: 7.5 kW - Right: 7.5 kW - Top: 7.5 kW - Bottom: 7.5 kW - Universal 360°: 7.5 kW ATS control system Grooved table Powered feed rollers in the work table Feed by cardan shafts Feed motor: 5.5 kW Psdpfxjrup Igj Agpsrd Feed speed: 6–36 m/min Total power: 61 kW

Stanje: generalkompletno obnovljen (rabljeno), Single-sided edge processing and edge banding machine (left-hand side) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed rate (adjustable) m/min: 6 - 30 EDGE PROCESSING: Jointing unit with CNC control 08.376 (2 x 4.5 kW) Spraying unit (for liquid release agent) EDGE BANDING SECTION: Lamps for panel edge heating Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for roll material (compartment N° 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0-25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° + spraying unit (for sliding agent) Contour milling unit (for fine trimming) CNC controlled 08.348 (2 x 0.66 kW) Multi-profile scrapers (CNC controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Universal milling unit for grooving, rebating, and profiling 08.183 (1 x 3 kW) Predjcr T N Depfx Agpsd Smoothing unit 08.53 Radius sanding unit for straight edges WI (4 x 0.75 kW)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, obratovalne ure: 5.400 h, Funkcionalnost: popolnoma funkcionalen, On offer: A moulding machine with tiltable spindle Manufacturer: Panhans Model: 240 Serial Number: 150 Year of manufacture: 1989 Weight: approx. 900 kg Operating hours: 5.400 Dimensions: Total length: 2,550 mm Total width: 1,350 mm Total height: 1,700 mm Motor: 7.5 kW Working height: 875 mm Cutterhead diameter: 30 mm (standard) Spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Spindle tilt, electric: –5° to +45° Spindle height via electric adjustment Prodpfx Ajwttqiegped Feed: 3-roller feed unit (manufacturer: Holzher)

Leto izdelave: 2004, Stanje: pripravljen za uporabo (rabljen), DOUBLE CNC STANDING TENONING MACHINE BACCI MODEL TSD-E NC14 - USED - working length: 1200 mm - maximum tenon length: 100 mm - hourly output: 2400 tenons (1200 workpieces) - cutter head speed: 9,000 rpm - cutter motor power (2 units): 8 hp (4 hp each) - numerical control with TOUCH SCREEN - automatic CSF loader Predjinbk Repfx Agped - safety enclosure - supplied with tooling - serial no. 800 - CE compliant (year 2004) - FULLY REFURBISHED

Stanje: rabljeno, Leto izdelave: 1992, maks. širina reza: 5300 mm, maks. višina reza: 2200 mm, premer žaginega lista: 300 mm, maks. debelina obdelave: 80 mm, odprtina žaginega lista: 30 mm, spodnja podpora: togi valji, nagib žagine glave: ročno, podajanje žage: avtomatsko, odsesavanje: zunanje odsesavanje, teža cca.: 1500 kg, moč motorja: 5,5 kW Lokacija skladišča: Nattheim Podpevvkq Tjfx Agpsrd

Stanje: zelo dobro (rabljeno), Multiblade saw Fermin Elola, made in Spain track width: 450 mm maximum cutting height: 130 mm motor power: 55 kW Podpfx Aeifkm Asgperd maximum saw blade diameter: 400 mm feed speed of the track steplessly adjustable central lubrication system track in very good condition machine little used, in very good condition