Dizelski viličarji

Hyster H5.0FT - Container-Indoor-Stapler -TRIPLEX

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.830 kg, Leto izdelave: 2011, Air Compressor Brand: Atlas Copco Model: GA75VSD FF Year of manufacture: 2011 Maximum allowable working pressure (MAWP): 12.8 bar / 185 psi / 1.28 MPa Capacity: 14.68 m³/min Voltage: 400 V Frequency: 50 Hz Motor power: 75 kW / 100 HP Rotational speed: 2975 rpm Weight: 1830 kg Dimensions: 2300 x 1100 x 2000 mm Atlas Copco Air Dryer Type: ID 245 Year of manufacture: 2011 Voltage: 380/400 V, 50 Hz Power: 1.93 kW Weight: 150 kg Maximum air pressure: 13 bar Refrigerant: R410A Maximum refrigerant pressure: 42 bar Refrigerant temperature range: from 1°C to 61°C Kedpfjv Nw A Aox Abbowt Minimum refrigerant pressure: 1.2 bar

Leto izdelave: 2009, obratovalne ure: 214 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Thin-cutting frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical specifications: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min Kwedow Dp Ufspfx Abbet - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Cutting heights with different blade lengths: Blade length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with twin planer) Blade length 420 mm → cutting height: 30–128 mm, 45–128 mm Blade length 500 mm → cutting height: 80–210 mm, 45–210 mm Blade length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm With twin planer: +250 mm Block height difference: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Additional technical data: Cutting width with middle fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss when cutting (kerf thickness): from 0.9 mm Saw blade life (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator workstation: - Idle run: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide rail monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Connecting cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Stanje: pripravljen za uporabo (rabljen), skupna širina: 3.000 mm, skupna višina: 5.350 mm, skupna dolžina: 15.000 mm, lastna masa: 20.000 kg, Valjčni transporter tipa G s peskalnimi kolesi Titan Za profile, pločevine, valje, cevi... maksimalna vhodna širina: 1100 mm maksimalna vhodna višina: 550 mm 4 turbine, vsaka po 11 kW delovna hitrost: 1,4–2,4 m/min Kwedpfxswikatj Abbst Skupna moč: 62 kW Namešča se na tla, temeljenje ni potrebno! Vključuje veliko izbiro novih rezervnih delov v vrednosti več kot 80.000 €!

Leto izdelave: 2022, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), The CE15 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories such as rotary nozzles, chemical injectors, and a sandblasting kit. Comparable but not identical to Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz Kwjdehf Na Sspfx Abbot CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor output: 11.2 kW (50Hz) / 13 kW (60Hz) Voltage: 400V (50Hz) - 440V (60Hz) Amps: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Supplied with standard accessories.

Stanje: novo, Leto izdelave: 2025, Blast Container High Cube Basic with Sweep Floor Shovel Hopper for approx. 4 pressure vessel fillings + blast vessel filling for extended blasting operation without refilling. Type SC.20FHC.5800 Basic Standard equipment, ready for operation: (Fill blasting media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo - 1x Pressure blast vessel - 1x Pressure regulator and water separator - 1x Blast hose DN 25 with 8mm nozzle - 1x Remote control with dead man's switch - 1x Media loading box/bunker Kedpew Ivk Tofx Abbjwt - 1x Blast media sieve + coarse particle collection bin - 1x Vertical separator with blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall as louvre/baffle separator - 1x Rubber wall cladding, 4mm with fabric reinforcement - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, door end switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Options: - Side Door Open, container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane rail 500 kg - C-profile rail for powder coating equipment - Blast trolley - Filter with Big Bag - HEPA after-filter for contaminated dusts, e.g., when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Stanje: dober (rabljeno), Leto izdelave: 2013, skupna masa: 1.519 kg, moč: 75 kW (101,97 KM), volumenski pretok: 14,85 m³/h, tlak (maks.): 12,8 letvica, Kompresor zraka Atlas Copco GA75VSD FF Ksdpfoxk U Aljx Abbswt Tehnični podatki Proizvajalec: Atlas Copco Airpower Tip: GA75VSD FF Leto izdelave: 2013 Maksimalni tlak: 12,8 bar Dovod zraka: 14,85 m³/min Moč motorja: 75 kW Hitrost motorja: 3000 vrt/min Teža: 1519 kg Napajanje: 400 V 50 Hz 3 faze Izvedba: vijačni kompresor z oljnim vbrizgom Upravljanje: elektronska upravljalna plošča Izvor: izdelano v Belgiji Za točnost, popolnost in ažurnost podatkov ni zagotovila.

Stanje: dober (rabljeno), številka stroja/vozila: 3069, Leto izdelave: 2018, nosilnost: 9.000 kg, dvižna višina: 5.600 mm, tip droga: dupleks, širina nosilnega okvirja vilic: 150 mm, dolžina vilic: 2.440 mm, skupna dolžina: 4.270 mm, skupna širina: 2.555 mm, obratovalna teža: 13.430 kg, dodatne značilnosti opreme: Front mud guards, Rear mud guards, Centralized greasing system, Oprema: osvetlitev, Hyster H9.00XM-6 pri Uniktruck Kwedpfx Asul Du Tebbot

Stanje: dober (rabljeno), Leto izdelave: 2000, Schroeder Mosaic Press 160 mm. Bonding patterns – brick/bond (English pattern) panel 640x274 mm and halves 640x137 mm, bonded in 6 variants: Kwedpfx Ajr Iyvbebbot - single brick, offset 50% - double brick, offset 50% - triple brick, offset 50% - single brick, offset 25% - double brick, offset 25% - triple brick, offset 25%

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Oferujemy x2 sprężarki ATLAS COPCO ZR 400 7,5 o następujących parametrach technicznych: - Maksymalne ciśnienie robocze: 7,5 bar - Przepracowane godziny: 53 000 Ksdpou Szu Nefx Abbewt - Moc zainstalowana: 355 kW - Prędkość obrotowa wału: 1485 obr./min - Rok produkcji: 2014 Sprężarki zostały zdemontowane z przedsiębiorstwa, które zakończyło działalność. Wyposażenie dodatkowe: Sprężarki sprzedawane są w komplecie z x2 osuszaczami powietrza Atlas Copco, model: MD1000 W CE, o parametrach: - Maksymalne ciśnienie robocze: 10,5 bar - Rok produkcji: 2014 Prosimy o przesyłanie ofert cenowych bezpośrednio przy nawiązywaniu kontaktu.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Horizontal thin-cut band saw with 3 heads 300 mm working width Capable of cutting up to 4 lamellae in a single pass New 2024 model with larger wheels Touchscreen and Schneider PLC 970 mm wheels for higher cutting speed Frequency inverter on the wheels for adjustable cutting speed. For lamellae starting from 2 mm thick Kedpfx Ajvwbg Uebbjwt