Dizelski viličarji

Hyster H16.00XD-12

Stanje: dober (rabljeno), številka stroja/vozila: 2116, Leto izdelave: 2022, nosilnost: 16.000 kg, dvižna višina: 4.580 mm, tip droga: dupleks, širina nosilnega okvirja vilic: 200 mm, dolžina vilic: 2.440 mm, skupna dolžina: 5.514 mm, skupna širina: 2.540 mm, obratovalna teža: 23.360 kg, dodatne značilnosti opreme: Rear mud guards, Front mud guards, Oprema: osvetlitev, Hyster H16.00XD-12 od Uniktruck Kjdpfxjquwd Uo Abbjwt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.830 kg, Leto izdelave: 2011, Air Compressor Brand: Atlas Copco Kjdpfx Abev Nw A Asbswt Model: GA75VSD FF Year of manufacture: 2011 Maximum allowable working pressure (MAWP): 12.8 bar / 185 psi / 1.28 MPa Capacity: 14.68 m³/min Voltage: 400 V Frequency: 50 Hz Motor power: 75 kW / 100 HP Rotational speed: 2975 rpm Weight: 1830 kg Dimensions: 2300 x 1100 x 2000 mm Atlas Copco Air Dryer Type: ID 245 Year of manufacture: 2011 Voltage: 380/400 V, 50 Hz Power: 1.93 kW Weight: 150 kg Maximum air pressure: 13 bar Refrigerant: R410A Maximum refrigerant pressure: 42 bar Refrigerant temperature range: from 1°C to 61°C Minimum refrigerant pressure: 1.2 bar

Stanje: dober (rabljeno), številka stroja/vozila: 2204, Leto izdelave: 2022, nosilnost: 16.000 kg, dvižna višina: 4.000 mm, tip droga: dupleks, širina nosilnega okvirja vilic: 200 mm, dolžina vilic: 2.440 mm, skupna dolžina: 5.400 mm, skupna širina: 2.550 mm, obratovalna teža: 23.052 kg, dodatne značilnosti opreme: Hydraulic sliding cabin, Rear mud guards, Warning triangle, Hyster Tracker, Centralized greasing system, Dual tread, NATO-socket, Front mud guards, Oprema: osvetlitev, Hyster H16.00XD-12 od Uniktruck Kedpewdxxmjfx Abbewt

Stanje: dober (rabljeno), številka stroja/vozila: 2258, Leto izdelave: 2022, nosilnost: 16.000 kg, dvižna višina: 6.090 mm, tip droga: triplex, širina nosilnega okvirja vilic: 200 mm, dolžina vilic: 2.440 mm, skupna dolžina: 5.510 mm, skupna širina: 2.550 mm, obratovalna teža: 23.052 kg, dodatne značilnosti opreme: Hyster Tracker, Oprema: osvetlitev, Hyster H16.00XD-12 od Uniktruck Kwjdswkixwopfx Abbot

Stanje: novo, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Excellent support! ✈️ 12-week delivery ✈️ Kwjdpjfggcwjfx Abbot ✅✅✅ Energy efficiency class A+++ ✅✅✅ ✳️Maintain your liquidity! We offer a wide range of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery times! ⌛⏰◄◄◄ ✨✨Buy direct from the manufacturer and secure price and quality advantages!✨✨ Benefit from Proton’s 40 years of expertise in surface coating technologies. ➖➖➖➖➖ ☀️ 2-YEAR WARRANTY ☀️ ✅The Multi-Treat spray pretreatment machine is used for surface treatment of materials to be painted. Depending on the process, it enables handling up to 8 different chemicals with a variable number of tanks. All tanks are made from 316 stainless steel and are insulated. The number of tanks and heated tanks is determined according to your process requirements. ✅Tank heating is provided via gas heat exchangers. All processes can be monitored and both time and temperature for each stage can be set via the PLC touchscreen. ✅Any faults that occur in the system can be tracked via the control panel. Automatic float switches are installed in each tank; if the water or chemical level is too low, the system automatically stops and replenishes fluid by transferring between tanks, ensuring safe operation. ✅A drip tray is installed under all tanks, manufactured from 316 stainless steel. The tanks are made of 2 mm thick 316 stainless steel. The material is penetration-tested and the tanks are argon-welded and sealed. Grates in the tanks prevent debris from reaching the pumps. The interior of the cabin is made from 304 stainless steel sandwich panels, while the exterior is powder-coated sheet. ✅Panel thickness is 80 mm, made from polyurethane-filled stainless steel panels. PPT ring pipes and nozzles ensure long service life. ✅Thanks to the steam extractor fan, steam is prevented from escaping into the work area. The wash station doors are designed like containers and feature silicone seals. The movable washing platform inside the cabin moves back and forth to wash the materials. Hoses are carried by a mobile support system. Each process has separate pumps and a waste pump for draining liquids from the tanks. The draining pump is connected to the chemical drain tank. ✅Manual spray guns are available for each process for manual applications. The system features a manual pre-treatment mode. Drip time and process duration can be set using the PLC panel. Drip time applies to manual operation.

Stanje: novo, Dimensions (LxWxH): 1,630 x 700 x 1,200 mm Approx. Weight: 480 kg Total Power Requirement: 1.1 kW Bending Radius: 2 mm Sheet Thickness: 3 mm Sheet Length: 1,050 mm Technical Data Sheet Rolling Machine Roller Diameter: 90 mm Rolling Speed: 6 m/min • Asymmetric roller arrangement • 2 rollers driven by brake motor • Rear roller adjustment via handwheel • Swiveling top roller • Conical rolling device • Double foot switch for forward/reverse operation • Lower and rear rollers with wire grooves • Operating manual in GERMAN Kwsdpfx Abed Eqqqobst EXTRA: hardened rollers EUR 900,-- See the catalogue at the following link:

Stanje: pripravljen za uporabo (rabljen), skupna širina: 3.000 mm, skupna višina: 5.350 mm, skupna dolžina: 15.000 mm, lastna masa: 20.000 kg, Valjčni transporter tipa G s peskalnimi kolesi Titan Za profile, pločevine, valje, cevi... maksimalna vhodna širina: 1100 mm maksimalna vhodna višina: 550 mm 4 turbine, vsaka po 11 kW delovna hitrost: 1,4–2,4 m/min Skupna moč: 62 kW Namešča se na tla, temeljenje ni potrebno! Kjdpfx Aswikatjbbjwt Vključuje veliko izbiro novih rezervnih delov v vrednosti več kot 80.000 €!

Leto izdelave: 2019, Stanje: novo, Recirculating Curing Oven Gas Furnace CGN Oven Powder Coating Oven NEW SGS-800/O Gema Optiflex Width: 2500 mm / Height: 2500 mm / Depth: 12500 mm Kwodpfx Aocw Tzxebbst Directly from the manufacturer. For more information, see Romer-Germany

Leto izdelave: 2020, Stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. Kwedpfx Absfz U S Eebet All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: novo, Step-by-step coating systems Elboy Industrial Solutions designs and manufactures a wide range of paint shops tailored to your product requirements. With ELBOY, you can use virtual reality during the design phase to navigate your facility, allowing you to make necessary adjustments right from the start, avoiding unexpected results later on. We offer engineering and manufacturing services for various applications, with special focus on environmental protection and occupational safety across all processes, including sandblasting, filling, washing, priming, and topcoating for all product sizes. The 'Step by Step' systems are equipped with overhead conveyors or floor conveyors, and can be configured for any product size. Cabins for sandblasting, chemical washing, pre-coating, drying, filling, top coating, and curing can be seamlessly integrated into the system. To execute each process step-by-step as specified by the system, automatic doors open once the programmed cycle is complete, and the product proceeds automatically to the next process line. Kedpfx Ajdy Dw Aobbewt These fully automated systems are operated via a 15-inch touchscreen and offer comprehensive reporting options—including main computer monitoring, product reporting, results feedback as required, and remote control capabilities. Our paint shops are designed and built by our engineers to meet your capacity, application, and specific operational requirements. Whether you require electrostatic powder coating, wet painting, sandblasting, coating, washing, or similar systems, our solutions deliver maximum efficiency with minimal personnel requirements and the smallest possible footprint.