Hidravlična stiskalnica

HYMAG HS-2-30 MK 3

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend. Kledofxyhfopfx Af Nel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, Pressing force: 3,600 kN, Pressing stroke: 1.7 mm, Pressing capacity: 6,120 J. Stroke: 60 mm, Installation height: 340 mm. Table clamping width/depth: 440 mm/525 mm, Tool holder width/depth: 440 mm/320 mm. Dimensions (LxWxH): 1,300 mm x 2,000 mm x 2,230 mm, Weight: approx. 6,300 kg. Kodpfx Aer A Eifof Njll

Stanje: dober (rabljeno), Cutting line A.Saint 1500 x 2 mm, I have more photos available on my website. Kljdpfeiihp Ssx Af Nol

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, vrsta upravljanja: CNC krmiljenje, vrsta laserja: vlakenski laser, laserska moč: 3.000 W, CNC Laser Cutting System TruLaser Cell 3000 (L34) fiber Max. Working Area (X x Y x Z, mm): 800 x 600 x 400 Control: TRUMPH HMI based on Sinumerik 840 D solution line Laser Power: 3,000 W Operating Hours: 31,875 h Laser Beam On Time: 3,286 h Machine Features - High-dynamic, precision CNC laser machine - Machine bed made from mineral cast - Cantilever axis system - Travel range 800 x 600 x 400 mm - X-Y axes with linear direct drives - Absolute measuring system with glass scales - Z-axis with linear guide and ball screw drive - Panel PC for process monitoring - Integrated electrical cabinet and water-air chiller Safety Housing Active - Active, sensor-monitored laser safety system, Laser Safety Class 1 for laser powers > 1,000 - 8,000 W - Automatic vertical door with personnel protection - Double-walled side safety doors - Protective window Technology Package CutLine Professional - Cutting process adapter with gas supply - FocusLine (focus diameter) - ControlLine Kedpfx Asxur Iasf Noll - Digital camera system for process monitoring Cutting Optics Adjustment Device - For aligning the cutting optics with the laser beam Technology Package WeldLine - Welding function with FocusLine Professional - Welding gas supply for 3 gases Process Adapter Welding f150 Crossjet - Swivel axis for focusing optics - Torque axis for 3D-processing with direct measuring system - Optics swivel angle ± 135° - Clamping frame with fixture bridge set - Modular system for mounting workpiece holders, height adjustable 640–940 mm - 1x short and 1x long fixture bridge 2D Cutting Table 800 x 600 mm - For cutting sheets up to 6 mm thick - C180 rotary axis for processing rotationally symmetric components - 3-jaw chuck d=125 Status lights Multi-touch control unit Dust Extractor MF-L1000 - External extraction system with a volume flow of 1,000 m³/h - Filter system with automatic cleaning - Power supply and control via laser machine Function Control MF-L1000 - Reactive safety system for fire detection and suppression TruDisk 3001 - TruDisk 3001 Laser Unit (4 C) - Diode-pumped disk laser with beam quality of 4 mm mrad - Laser power: 3,000 W at the workpiece Includes: - Laser with 1 cavity - Integrated laser supply and real-time capable control for evaluation and visualization of operating data - Fast laser power control - TruControl 1000 control: - Real-time OS CPU - 2x USB interfaces - 24x digital I/O interfaces, configurable as real-time - Expandable with fieldbus interfaces - Memory capacity for 199 laser programs - Intelligent water management (CLK) with water-to-water heat exchanger and operating status display on control unit - Safety monitoring according to Laser Safety Class 1 incl. central safety lock - Housing for max. 4 laser outputs - Protection class: IP54 Control Panel OP84 - Detachable operator panel for laser unit control - 8.4" touchscreen with rotary-push knob - Buttons: Emergency stop, Power On-Off Beam Delivery includes: - Optics assembly for 1 laser light cable D - Central safety interlock - Switching time 50ms - Output 1 with 100% safety interlock - Pilot laser for each laser light cable output incl. electronic activation Cooling Unit

Stanje: rabljeno, Leto izdelave: 2004, Presskraft: 630 t Hub: 800 mm Ständerweite: 2.600 mm Abstand Tisch/Stößel (bei oberem, verstelltem Hubanschlag): 1.500 mm Tischfläche: 2.500 x 1.300 mm Ziehkissendruck (im Tisch): 300 t Ziehkissenhub (im Tisch): 300 mm Stößelfläche: 2.500 x 1.300 mm Seitlicher Ständerdurchgang: 1.040 mm Abwärtsgeschwindigkeit: ab 600 mm/sec Aufwärtshub-Geschwindigkeit: 360 mm/sec Arbeitsgeschwindigkeit: 14 – 42 mm/sec Antriebsleistung: 145,0 kW Maschinengewicht: 85,0 t Platzbedarf (BxTxH): 4,2 x 4,0 x 7,8 m Bauhöhe über Flur: 6,80 m Bauhöhe unter Flur: 1,0 m Vorführmaschine aus einer technischen Hochschule mit ca. 920 Betriebsstunden – neuwertiger Zustand! Für Handbeschickung gemäß CE-Norm zugelassen. Mit ölhydraulischem Antrieb, druck-, zeit- und wegabhängig steuerbar, oberer und unterer Hubbegrenzung, Lichtschranke (Sick) vorder- und rückseitig, hydraulischem Ziehkissen im Tisch inkl. Auswerferfunktion, hydraulischer Schnittschlagdämpfung, mechanischem Tiefenanschlag über 4 motorisch verstellbare Spindeln, hydraulischer Stößelverriegelung, Zweihandbedienung, 2 Werkzeugwechselkonsolen, 4 hydraulische Kugelrollenleisten im Tisch, 4 Schwingelemente. English translation: Press force: 630 t Stroke: 800 mm Upright clearance: 2,600 mm Distance table/ram, max. stroke up (adjusted): 1,500 mm Table size: 2,500 x 1,300 mm Cushion force in table: 300 t Cushion stroke in table: 300 mm Ram area: 2,500 x 1,300 mm Kedpjv Svarofx Af Nell Side frame pass opening: 1,040 mm Downward speed: from 600 mm/sec Upward speed: 360 mm/sec Working speed: 14 – 42 mm/sec Drive motor power: 145.0 kW Machine weight: 85.0 t Space requirements (W x D x H): 4.2 x 4.0 x 7.8 m Overall height above floor: 6.80 m Foundation pit depth below floor: 1.0 m Demonstration machine from a technical university with approx. 920 operating hours – as new condition! Approved for manual loading/unloading according to CE standards. Equipped with electro-hydraulic drive, pressure/time/position-dependent controls, upper and lower stroke limit, light barriers (Sick) front and rear, hydraulic die cushion in table incl. ejector function, hydraulic cutting shock absorber, mechanical depth stop via 4 motorised spindles, hydraulic ram locking, two-hand operation, 2 die change consoles, 4 hydraulic ball roller strips in the table, 4 vibration-damping elements.

Stanje: dober (rabljeno), Tailstock Kledpfxedlp Txe Af Nol Quill size: MT 2 Quill stroke: 30 mm Height adjustable Centre height: 250 – 285 mm Adjustable tilt: -5° to +15° Base dimensions: 230 x 155 mm Weight: 27 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Pressure: 25 tons Outreach: 160 mm Installation height: 500 mm Table surface: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Power requirement: 4 kW Kledpfxofcw Apj Af Nel Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1982, ULMIA 1710s Table Saw Year of manufacture: 1982 Tilting angle: 45° Cutting length on sliding table: 750 mm Max. blade diameter: 250 mm Max. cutting height: 75 mm Cutting width between saw blade and fence: 650 mm Sliding table with angle cutting scale Table size: 1000 x 630 mm Klodpfx Ajufgnzof Nsl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 64 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 665901, skupna masa: 1.154 kg, nosilnost: 210 kg, doseg roke: 3.096 mm, This is a KUKA KR 210 R3100 ultra industrial robot Kjdpou Nzzaefx Af Njll Year of manufacture: 2017 We are also happy to offer this robot as a fully refurbished unit! The robot includes the following options: - BoardPackage - EthernetKRL - LoadDataDetermination - Profinet KRC-Nexxt - RemoteService - SafeOperation - UserTech

Leto izdelave: 1967, Stanje: dober (rabljeno), Bandwidth: 300 - 1,250 mm Strip thickness: 0.5 - 3 mm Kjdpfxogruhce Af Njll Blade shaft diameter: 180 mm