Hidravlična stiskalnica

Hydraulische Portalpresse Type H26

Leto izdelave: 1978, stanje: rabljeno, Pressure 100 t Outreach 380 mm Stroke 400 mm Drive power 22 kW Installation height 600 mm Ram surface 600x500 mm Lrsdslp U Dpjpfx Al Njk Table surface 720x600 mm Machine weight approx. 9 t Two-hand operation, Stroke and pressure shut-off, Pressing time

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 100 t Column gap: 1900 mm Stroke: 500 mm Distance table/ram, stroke up: 800 mm Table surface: 1850 x 1000 mm Table through-hole: 160 mm Table height above floor: 850 mm Ram surface: 1850 x 800 mm Lateral column clearance: 540 mm Ljdpfxovuui Do Al Nerk Descent speed: from 400 mm/s Return speed: 400 mm/s Working speed: 20 - 70 m/min Oil capacity: 900 l Drive power: 34.0 kW Weight: 13.0 t Space requirements (WxDxH): 2.7 x 2.2 x 4.0 m Approved for manual loading/handling as per German accident prevention regulations (UVV) Equipped with oil-hydraulic drive, hydraulic stroke shock absorption, hydraulic ram locking No foundation pit required Can be offered as-is (non-operational), operational as-is, or alternatively retrofitted with new Siemens S7-1500 F control system.

Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: MV-300E/NC, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 300 t, širina mize: 1.250 mm, dolžina mize: 1.250 mm, skupna dolžina: 2.300 mm, skupna širina: 1.800 mm, skupna višina: 3.500 mm, skupna masa: 18.000 kg, pritisk: 320 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, FOUR-COLUMN HYDRAULIC PRESS FOR STAMPING, DEEP DRAWING, DIE CUTTING, AND DEBURRING JOBS Lredpfxewphhns Al Nok Custom designed for greater precision and capacity, and especially manufactured for deep drawing, die cutting, and deburring operations. Equipped with an upper and lower table made of machined C45E steel with DIN-650 T-slots to ensure minimum friction during the vertical movement of the upper table, thanks to maintenance-free bimetallic bushings and perfect parallelism ensured by four cylindrical, chromed, and ground columns. Uses an optimized hydraulic system with a pressure of 290 Bar, guaranteeing long service life and reliable operation. Fully complies with all essential safety and health requirements according to CE regulations.

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 315 t Frame width: 2,350 mm Distance table/ram, large stroke at top, adjustment at top: 1,200 mm Frame width between cutting impact dampers: 1,600 mm Distance table/ram, stroke at top: 1,200 mm Stroke: 800 mm Table surface: 2,060 x 1,260 mm Table height above floor: 750 mm Drawing cushion force in table: 100 t Drawing cushion stroke in table: 400 mm Drawing cushion area: 1,250 x 1,000 mm Lateral frame passage: 780 mm Ram area: 2,200 x 1,500 mm Ejector force in ram: 63 t Speed downwards: 500 mm/s Speed upwards: 310 / 410 mm/s Working speed: 20 - 73 mm/s Oil volume: 3,900 l Drive capacity: 80.0 + 45.0 kW Weight: 55.0 t Space requirement (LxWxH): 4.6 x 2.7 x 7.2 m Height above floor: 6.0 m Height below floor: 1.2 m Approved for manual loading according to German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, hydraulic cutting impact damping, hydraulic ram locking Lsdpfxevuugvo Al Nsrk Can be offered either as is (partially dismantled, in need of overhaul) or, alternatively, overhauled with new Siemens S7-1500 F control system.

Stanje: pripravljen za uporabo (rabljen), Upogibni stroj (preša), ESPE CTO 80, rabljeni stroj Proizvajalec: ESPE Model: CTO 80 Pritisk: 80 ton Dolžina upogibanja: 2500 x 3 mm Dimenzije mize: 2500 x 160 mm Glavna moč motorja: 10 kW Teža: 6100 kg Lodpfx Alswfrkfj Nsrk

Stanje: rabljeno, Leto izdelave: 1991, Pression 125 t Distanța între stâlpi 2100 mm Cursă 1000 mm Înălțime de montare 1300 mm Suprafața mesei 2230 x 1300 mm Forță pernă de tragere 63 t Cursă pernă de tragere 60 mm Lredpjvut D Tefx Al Nok Suprafața pernei de tragere 1000 x 900 mm Înălțime masă deasupra pardoselii 1050 mm Suprafața ștampilei 2100 x 1000 mm Viteză coborâre 50 mm/sec Viteză ridicare 50 mm/sec Viteză de lucru 10 mm/sec Volum ulei 410 l Putere acționare 22,0 kW Greutate 31,0 t Dimensiuni aprox. 3,1 x 1,7 x 5,95 m Presă de probă hidraulică Aprobată pentru încărcări manuale conform normelor germane de prevenire a accidentelor (UVV) Cu acționare hidro-oleică, control dependent de presiune/timp și cursă, pernă de tragere hidraulică în masă, blocare a ștampilei, operare cu două mâini Nu necesită groapă de fundație Poate fi oferită nepusă în funcțiune, pusă în funcțiune în starea dată sau opțional cu nouă comandă Siemens S 7-1500 F.

Stanje: novo, Leto izdelave: 2026, This is a modern CNC plasma cutting machine designed for industrial applications, used for cutting sheet metal and profiles by means of a plasma torch. It features a robust construction made from the highest quality steel and aluminum, a large cutting capacity, the ability to cut elements of virtually any shape, and low process costs. Material cutting is performed in a short time while maintaining high precision of detail reproduction. To obtain the desired shape, simply import a file into the software, making the operation of the cutter easy and intuitive. Lrjdpfsur R Erex Al Nek Our plasma cutting machines are primarily intended for processing the following materials: - Mild steel, - Stainless steel. CONSTRUCTION The plasma cutter frame has been designed and manufactured from scratch in our factory. The high-quality steel used for machine production is cut, welded, and then subjected to precision machining. The entire frame, gantry, and gantry arms have additional reinforcements, providing high rigidity and eliminating vibrations and deformations. DRIVES Our cutting machines are equipped with high-power, high-resolution AC servo motors, which provide appropriate acceleration and speed in all directions. These highly dynamic and precise motors with feedback ensure zero backlash through constant monitoring of operating parameters. Classic, proven helical racks are used on the X and Y axes, delivering superior durability and precision. TORCH We use components from the leading manufacturer PGCNC in our plasma systems. The torch technologies significantly enhance productivity and cutting speed. HD technology ensures better hole quality, increased piercing performance, and beveling capabilities. This guarantees high-quality, consistent cuts and maximized productivity with minimal operating costs and maximum reliability. SLAT TABLE The slat table is built using technology resistant to high-temperature operation. This allows for continuous operation without the risk of burn-through that could prevent even placement of the material on the working table. The layout of the slats can be easily adjusted depending on the size of the parts to be cut. The slat table is an excellent solution for cutting thicker materials. SOFTWARE The machine comes with Starfire 2D CAD/CAM software. Various functions are available to the user, including the ability to import ready-made designs in vector formats: .dxf, .plt, .ai, .eps. The software enables fast and precise development of cutting paths. POWER SOURCE The standard equipment of the machine includes a 120A power source, which offers high performance as well as high quality and cutting speed. AUTOMATIC LUBRICATION SYSTEM The plasma cutter is also equipped with an automatic lubrication system, which minimizes machine maintenance requirements. The central lubrication system is a simple and functional device used to deliver oil to contact points of machine components.

Stanje: rabljeno, Leto izdelave: 1978, Technical details: Press force: 160 t Ram stroke - max.: 500 mm Distance table/ram: max. 2,880 mm Ram speed, forward: 0.03 m/sec Lrjdpfx Alju Nfq Eo Nok Ram speed, return: 0.04 m/sec Ram surface: W: 1,720 x H: 1,000 mm Ram diameter: Ø 259 mm Ram bore, center hole: Ø 180 mm Operating pressure: 260 bar total power requirement: 11.0 kW Machine weight approx.: 18.8 t Machine dimensions approx. LxWxH: 7.5 x 1.6 x 1.6 m HYDRAULIC HORIZONTAL MULTIPURPOSE PRESS TÜV inspection valid until 02/2024 Specifications on the counterblock: Size W: 1,720 x H: 690 mm Counterblock lower mount = Ø 225 mm x depth = 450 mm Horizontal manual displacement: max. length 2,880 mm Specifications for the guide cylinders: 2 opposing cylinders; size Ø 230 mm x length 3,350 mm, 7 cylinders separated by adjustment groove Ø 170 x 50 mm, manually repositionable using the adjusting ring Specifications for the support bed: Steel construction, welded with 2 guiding grooves 20 mm; size LxWxH: 4,000 x 1,400 x 200 mm

Stanje: novo, Turning length: 3,000 mm Swing diameter: 660 mm Swing diameter in gap: 870 mm Swing diameter over cross-slide: 420 mm Spindle speed: 36 - 1,600 rpm Quill: MT 5 Quill travel: 150 mm Spindle bore: 105.0 mm Motor power: 7.5 kW Spindle mount: DIN 55029 D 1-8 Machine weight: approx. 3,990 kg Dimensions (L x W x H): 4,500 x 1,280 x 1,650 mm - Versatile applications in general mechanical engineering, production, and single-part manufacturing - The machine bed is cast in one piece, offering exceptional rigidity and low vibration—key prerequisites for precise turning operations - Modern main spindle bearing with precision angular contact ball bearings - Central, ergonomically arranged feed and thread controls with leadscrew and feed shaft - Standard rapid traverse longitudinally and for facing to minimize non-productive time - Gears are large, hardened, and precision-ground - Removable gap bridge allows for machining of large diameter workpieces - Sliding tailstock for taper turning, handwheel with vernier scale (0.02 mm) - Electromechanical foot brake to reduce non-productive times - Optimum cutting performance, including for face turning Scope of delivery - Slip clutch - Rapid traverse longitudinal/facing - LED machine lamp - 3-axis digital readout ES-12 V with LCD screen - 3-jaw chuck PS3-315 mm / D8 - Face plate 630 mm - Fixed steady rest – max. workpiece diameter 250 mm - Travelling steady – max. workpiece diameter 110 mm - 1 dead center / 1 live center - Motor with magnetic brake as per CE standard - Foot pedal with brake function as per CE - Initial fill with Shell Tellus 46 - Coolant system - Quick-change tool post with 4 holders - Safety guard for quick-change tool post - Reducing sleeve - Chip guard Lrodsxabycjpfx Al Njk - Operating tools