Obdelovalni center

HWACHEON VESTA 1000

Stanje: dober (rabljeno), Leto izdelave: 2016, In good technical condition and fully functional. Year of manufacture: 2016. Machine includes 4-axis TSUDAKOMA, workpiece measuring probe, and tool measuring probe. Axis travels (X/Y/Z): 1,000 / 550 / 500 mm Distance from table surface to spindle face: 130 - 630 mm Axis guide: linear rolling LM Table working area: 1,100 x 502 mm Table load capacity: 700 kg Table surface configuration: 5x T-slot (width 18 mm, spacing 80 mm) Spindle maximum speed: 12,000 rpm Spindle power (10 min./continuous): 18.5 / 11 kW Rapid traverse (X/Y/Z): 36/36/30 m/min Feed rate (X/Y/Z): 1 – 24,000 mm/min Feed motor (X/Y/Z): 1.8 / 1.8 / 3.0 kW Hsdpjx Tti Sefx Af Tsng Automatic tool changer Tool taper: BT40 Pull stud: MAS P40T-1 (45°) Number of tool stations: 24 Max. tool diameter: Ø 80 / Ø 150 mm (without adjacent tool) Max. tool length/weight: 300 mm / 8 kg Tool-to-tool change time: 2.5 s Chip-to-chip change time: 4.3 s Magazine and changer disk design with rotating arm Total connected load: 30 kVA Tank capacity for spindle lubrication/cooling: 6 / 20 l For coolant emulsion: 380 l Machine dimensions – height: 2,670 mm Footprint (length x width): 3,335 x 2,200 mm Weight: 6,500 kg Control system: Fanuc 0i-MD Spindle air blast Machine setting elements Machine safety enclosure Swarf conveyor in working area Cooling system Safety door Ethernet interface

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Machining Centre - Vertical / Manufacturer: DECKEL MAHO / Model: DMC 63V / Year of Manufacture: 1999 The machine can be inspected under power and cutting, by appointment. Well-maintained, very good condition, fully functional. Spindle replacement: 18.03.2022 Spindle hours (as of 13.03.2025): 51,206 h The machine is equipped with a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed drives: - Feed force X, Y, Z (100% duty cycle): 6,000 N - Feed rate: 0 - 30,000 mm/min - Rapid traverse X, Y, Z: 30 m/min - Ball screw diameter/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z axis according to VDI/DGQ 3441: 0.015/0.010 mm (indirect/direct measuring system) Measuring system: - Input increment: 0.001 mm Work spindle: - Drive power (40/100% duty cycle): 13/9 kW - Torque (40/100% duty cycle): 83/57 Nm - Speed range: 1 - 10,000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12,000 N Tool magazine / changer: - Tool change system: Pick-up - Number of magazine positions: 24 positions Hjdsv Nxbyjpfx Af Tjng - Max. tool diameter with free adjacent positions: 80/140 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg - Chip-to-chip time: 6.5 sec - Magazine rotation speed: 47 rpm - Max. load capacity of tool magazine (24 x 3 kg): 72 kg Machine table: - Clamping area with T-slots DIN 650-14: 800 x 500 mm - Table load (setup weight): 500 kg - Loading height: 850 mm - Max. workpiece height (with max. tool length): 240 mm EQUIPMENT: - CNC control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - ICS, 15 bar - Coolant system (emulsion) - Electronic handwheel - Chip conveyor - Documentation - CE marking No guarantee for completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 550 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 36 m/min, hitri pomik os Y: 36 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 118 Nm, proizvajalec krmilnikov: FANUC, model krmilnika: i-Series, skupna višina: 2.700 mm, skupna dolžina: 3.000 mm, skupna širina: 2.300 mm, širina mize: 1.100 mm, višina mize: 1.000 mm, dolžina mize: 500 mm, obremenitev mize: 700 kg, skupna masa: 5.040 kg, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 346 h, moč vretenovega motorja: 18.500 W, nos vretena: BBT40 - BT40, število vreten: 1, število mest v zalogovniku orodij: 30, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, HWACHEON VESTA-1000+ zagotavlja visoko natančnost in dinamiko zaradi svoje stabilne litoželezne baze in linearnih vodil. Z močnim vretenom s 12.000 vrt/min in optimizirano programsko opremo je idealen za raznolike aplikacije. Stroj je v izjemno urejenem stanju in ima 346 ur na vretenu (glejte slike). Hnjdpfx Aex Rpp Ajf Tog Ta HWACHEON VESTA 1000+ je opremljen z: - Linearnimi vodili - 12.000-vrtečim vretenom (BT40 - BBT40) - Hlajenjem skozi vreteno - Hladilnikom/chillerjem vretena - Transporterjem za ostružke - Elektronskim ročnim kolesom - Zunanjim hlajenjem prek šob - Magazinom za orodje, polnim orodja (vklj. 3D-tipalo) in rezalnim orodjem - Precizna strojna primež - Sklop težkih vpenjalnih objemk Možnost ogleda stroja v delovanju po dogovoru!

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 550 mm, pomik po osi Z: 500 mm, Technical Data VESTA-1000/12K Travels Axis travel (X/Y/Z) mm: 1,000 / 550 / 500 Distance table surface – spindle nose mm: 130 – 630 Axis guides: linear roller LM Table Working area mm: 1,100 x 502 Load capacity kg: 700 Table configuration mm: 5x T-slot (width 18 mm, spacing 80 mm) Spindle Max. spindle speed rpm: 12,000 Spindle power (10 min / continuous) kW: 18.5 / 11 Feed Rapid traverse (X/Y/Z) m/min: 36 / 36 / 30 Working feed (X/Y/Z) mm/min: 1 – 24,000 Feed motor (X/Y/Z) kW: 1.8 / 1.8 / 3.0 Automatic Tool Changer Tool taper: BT40 Drawbar: MAS P40T-1 (45°) Number of tool stations: 24 Max. tool diameter mm: Ø80 / Ø150 (without adjacent tool) Max. tool length / weight mm / kg: 300 / 8 Tool change time (tool-to-tool) sec: 2.5 Tool change time (chip-to-chip) sec: 4.3 Magazine and changer design: disc type with rotary arm Power Supply Power input kVA: 30 Tank Capacity For lubrication / spindle cooling l: 6 / 20 For emulsion cooling l: 380 Machine Dimensions Height mm: 2,670 Floor space (L x W) mm: 3,335 x 2,200 Weight kg: 6,500 CNC Control - Fanuc 0i-MD Additional Features Hnsdpfox Rzhdjx Af Tsg - Spindle air blow - Machine setup elements - Full machine enclosure - Screw conveyor in working area - Cooling system - Safety doors - Ethernet interface CNC System Software Options by HWACHEON: - OPTIMA (feed optimization) - HAI – 40 block memory (AI nano contour control) - HTLD (tool load monitoring) - HTDC (thermal expansion compensation for spindle and machine frame (HTDC=HSDC+HFDC)) - HECC (accuracy or speed preference during machining) - Central lubrication system - Lubrication oil discharge to separate tank - Electronic handwheel - Machine documentation in Czech - Pneumatic system - Program capacity: 1,280m (512kb) - Rigid tapping - 3-color machine status signal light - Spindle jacket cooling - Air dryer included - Work area lighting - 10.4" color LCD screen - CE certificate - Transformer - Through-spindle coolant 30 bar - Manual Guide i - Chip conveyor - Workpiece and tool probe - 4th axis direct control via Fanuc M-codes (or own controller for use on other machines)

Stanje: rabljeno, Leto izdelave: 2006, X-travel: 600 mm Y-travel: 400 mm Z-travel: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front milling spindle bearing diameter: 70 mm Rapid traverse (X/Y/Z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Fine feed rate: 15 steps / 0 - 1,260 mm/min Number of magazine positions: 40 Max. tool width: 80 mm Max. tool diameter with free adjacent box: 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Hjdpsv Az Ucjfx Af Teng Tool change time (chip-to-chip): 2.8 sec Tool change time (tool-to-tool): 1.0 sec Total power requirement: 34 kVA Machine weight approx.: 7.2 t Space requirements approx.: 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, x-hod 1000 mm y-hod 550 mm z-hod 500 mm Hsdpfx Afexvdtwj Tong CNC-krmiljenje Fanuc Oi-MD Velikost mize 1.100 x 500 mm maks. obremenitev mize 700 kg Vpenjalni stožec ISO BT-40 Hitrost vretena 10.000 min⁻¹ Podajalna hitrost brezstopenjsko 24.000 mm/min Hitri pomik 36/36/30 m/min Pogonska moč - motor vretena 15/11 kW Menjalec orodij 24 Hladilni sistem IKZ 20 bar Obratovalna napetost 400 V Skupna priključna moč 30 kVA Teža stroja cca 6,5 t Prostorske zahteve cca 3,35 x 2,20 x 2,67 m Transportni trak za odrezke 2,40 x 1,50 x 1,40 m Filtrirna naprava 0,90 x 1,40 x 1,30 m Transformator 0,60 x 0,55 x 0,55 m - Serijska št.: M281361B5N D - Delovni čas stroja: 21.011 h - z NC-delnim aparat KITAGAWA (klic preko M-ukaza) - Krmiljenje: FANUC Oi-MD - IKZ 20 bar - Transportni trak za odrezke

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Travel paths: 1000x550x550 mm Table size: 1120x540 mm Spindle taper: BT40 Spindle speeds: up to 10,000 rpm Tool changer: 24 positions Control: FANUC 0i-MD Coolant through spindle (CTS) Various accessories Hnjdeud Nbhspfx Af Tog MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Hjdpfx Afsvgxfye Teng Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel The machine is supplied with many tools.

Stanje: dober (rabljeno), Leto izdelave: 2019, Stroj ima 1500 ur vretena Hjdpfxoxy Hyzj Af Teng DMG Mori CLX 350 V 4, Leto izdelave 2019, Krmilje DMG Mori Slim Line / Siemens Shoptrun, Pomik X/Z 185/540 mm, Pomik Y osi 80 mm, Revolver z 12 orodji, Pogonska orodja, C-os, Merjenje orodij Tooleye, Trivpenjalna glava KNCS 225/66, Vpenjalni tulec, Držalo VDI 30, Visokotlačno hlajenje 12 bar, Kontra konica, Transporter ostružkov, Pripravljeno za podajalec palic.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 124, Cena na upit Polovna CNC vertikalna strug mašina Proizvođač: MORI SEIKI Model: VL 55 Godina proizvodnje: 2001 Hnodewl An Ijpfx Af Teg Sa CNC upravljanjem MSC 518, revolverskom glavom za 12 alata i transportnim sistemom za strugotinu Maks. dužina obrade = 653 mm Maks. prečnik obrade = 550 mm X osa = 350 mm Z osa = 660 mm Broj obrtaja do = 2000 o/min Snaga vretena = 30 kW Težina cca = 12,5 t