Hidravlični cilinder

HUSS Hub 730 mm

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0618012, Technical data: - Suitable for welding steel, aluminum, special metals, CrNi, etc. - Welding current: 450 A at 60% duty cycle - 360 A at 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control unit FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate cable set, device to wire feeder case: 1 m - 4-roller wire feed, steplessly adjustable - MIG/MAG torch, water-cooled, approx. 4 m - Ground cable - Pressure regulator Njdpfx Asvncubenpslf - Mobile chassis - Connection requirements: 400 V / 6.6 A / 8.7 kVA - Footprint approx.: W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: novo, Leto izdelave: 2025, Ring Bending Machine, Manufacturer: Zopf, Model: ZB 70/2 M - Two driven rollers - Dual adjustment of the upper roller - Operation possible in both horizontal and vertical positions - Shafts supported by tapered roller bearings - Use of interchangeable slide rails on the guide carriage Njdpfx Anet Hwfnepjlf - Roller diameters: 152/162 mm - Shaft diameter: 40 mm - Shaft speed: 8.5 rpm - Drive motor: 1.1 kW - Bending capacity: up to 60x10 mm (vertical orientation) - Round tube up to 80x2 mm - Angle iron up to 50x50x5 mm - Solid material up to 35 mm - Weight: 400 kg

Stanje: rabljeno, Leto izdelave: 1992, hitrost vretena (min.): 7.500 obr/min, največja hitrost vretena: 24.000 obr/min, 4 motor-driven grinding spindles (liquid-cooled, with purge air / oil mist lubrication) including the REFU HF frequency converter, e.g., suitable for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 Njdel Tn Afopfx Anpelf 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Frequency Converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter, frequency inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional but are sold without warranty – year of manufacture approx. 1992. A batch of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries of the European Community.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, 1 kos rabljene CNC ležiščne rezkalne stroje z upravljalnikom Heidenhain. Nedewxxzqjpfx Anpelf Dodatno rotacijska miza Rotacijska miza ima premer 1200 mm. 220.000 € leto 2012/2013 predelano z novo popolno rotacijsko mizo Rexroth, vgrajena kot C-os. Naklonska glava je na voljo. Priložena je velika količina orodij in 3D-merilna sonda.

Stanje: dober (rabljeno), Leto izdelave: 2003, Ref. No.: 10618 Manufacturer: KELLENBERGER Model: 600 U No. 33 Year of Manufacture: 2003 Control Type: Conventional Control System: n/a Location: Halberstadt Country of Origin: Switzerland Distance Between Centres: 600 mm Centre Height (standard): 125 mm Centre Height with Elevated Work Blocks on Headstock and Tailstock: 175 - 250 mm Swing Diameter with Lifting Blocks max.: 350 - 500 mm Table Swivel / Each Side: 10° Dwell Time for Table Reversal: 0 - 5 seconds Diameter / Width / Bore: 250 x 13 x 76 mm Grinding Wheel Spindle Speeds: 1500 / 1700 / 2200 / 3600 rpm Grinding Head Swivels: 360° Cross Travel of Grinding Head: 285 mm Rapid Traverse of Wheel Head: 40 mm Intermittent Feed per Table Reversal: 0.001 - 0.03 mm/diameter Micro Feed Dial Graduation: 0.001 mm / Ø Infinitely Variable Work Speeds (normal / special): 20-400 / 10-400 Max. Grinding Length: 900 mm Additional Information: The machine can be inspected under power. Njdpfx Anjya Dagopolf

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, prva registracija: 06/2021, vrsta goriva: bencin, barva: rumena, Leto izdelave: 2021, obratovalne ure: 150 h, Oprema: kabelska vitla, pogon na vsa štiri kolesa, Spider 2SGS large-area mower and slope mower with radio remote control, including winch. Purchased mid-2021, first owner, recent 150 operating hours service. Operator’s manual and complete documentation included. Remote control with two batteries. Nedpfjtv Rmfex Anpelf The mower has only been used for mowing in a solar park—nothing else. Runs perfectly, no issues. If you have any questions, just call.

Stanje: rabljeno, Metal lathe Elmag, good condition, approx. 1500 mm distance between centers, approx. 3000 kg Nledpfxsvrvmfo Anpsf Price changes reserved, subject to errors, misprints, and typesetting mistakes.

Leto izdelave: 1992, stanje: rabljeno, številka stroja/vozila: 0082-8100115, Technical Description: Passively damped CNC gantry coordinate measuring machine equipped with a Renishaw PH10M articulating probe head and TP20 touch-trigger probe. Measuring Range: Nlodpfsbig N Dsx Anpjf X-axis = 1500 mm Y-axis = 660 mm Z-axis = 660 mm Year of manufacture: 1992 Accuracy: Length measurement uncertainty according to VDI/VDE 2617: U3 = (3.5 + 4L/1000) µm Permissible temperature range for accuracy specification: 18..24°C Additional Information: System number: 0082-8100115 Software: PC-DMIS Version 3.5 Accessories: Various styli and an additional TP20 probe with medium trigger force

Stanje: rabljeno, Centre height: 140 mm; Table surface: 150x1050 mm; Longitudinal travel (manual): 600 mm; Cross travel: 230 mm; Height adjustment: 250 mm; 2 motor speeds: 1500–3000 rpm; Nledpfx Ascbhl Nsnpof 6 grinding spindle speeds: 2000–6000 rpm; Maximum grinding wheel diameter: 250 mm;

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Krmilnik Siemens, 12-postajna vrtljiva glava VDI16, vpenjalna glava, čeljustna glava, vodilni tok, poganjana orodja, Nodpfx Aozkk Hyjnpelf dodatna oprema.