3-osni obdelovalni center

HURCO VMX 42 t

Stanje: dober (rabljeno), Leto izdelave: 2012, moč: 0,018 kW (0,02 KM), potovalna razdalja osi X: 1.067 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, vrtljajska hitrost (min.): 12.000 obr/min, Hurco Machining Center V 42 T 3-axis technology Isdotxrbijpfx Al Nstf Travel range in X: 1067 mm Travel range in Y: 610 mm Travel range in Z: 610 mm Table dimensions: 1270 x 610 mm Spindle speed: 12,000 rpm 40-position tool changer Chip conveyor Simulation graphics Tool and material library Pocket milling with island Synchronous tapping without floating chuck WinMax control ICS high-pressure through-spindle coolant

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107.44.00.407, potovalna razdalja osi X: 800 mm, pomik osi Y: 650 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, teža obdelovanca (maks.): 500 kg, skupna višina: 3.200 mm, skupna širina: 3.200 mm, širina mize: 600 mm, višina mize: 2.400 mm, dolžina mize: 600 mm, vrtljajska hitrost (min.): 50 obr/min, največja hitrost vrtenja: 20.000 obr/min, skupna masa: 10.000 kg, največja hitrost vretena: 20.000 obr/min, moč vretenovega motorja: 15.000 W, število vreten: 1, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, La MIKRON UCP 800 Duro de l’année 2018 est un centre d’usinage 5 axes haute performance, équipé d’une commande Heidenhain iTNC 530. La machine offre des courses de 800 x 650 x 500 mm (X/Y/Z) ainsi qu’un axe C avec plage de pivotement sans fin de 360°. Les types de broche/adaptateur NCD 150 PL et NCD 200 PL avec raccord HSK-E63 sont installés. Le système de table représenté n’est actuellement pas monté. L’équipement comprend un convoyeur à copeaux, un système de refroidissement avec filtre ainsi que la documentation complète. La machine est disponible à l’enlèvement, chargement sur camion, et a très peu tourné dans l’ensemble. Itodpfxex D Ux To Al Njf Les heures de fonctionnement parlent d’elles-mêmes : Control ON : 30 064 h Machine ON : 10 322 h Program Execution : 4 159 h Drives ON : 7 331 h Spindle ON : 4 231 h La machine est sous tension et peut être démontrée à tout moment.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Pomik X/Y/Z: 1060mm/610mm/610mm, dimenzije mize X/Y: pribl. 1270mm/610mm, največja obremenitev mize: 1100kg, moč vretena: 18kW, podajanje: 7600mm/min, hitri pomik: 30m/min, število mest za orodja: 24, orodni priključek: SK40, hitrost vrtenja: 12000obr/min, pozicijska natančnost: +/-0,01mm, ponovljivost: +/-0,005mm. Dimenzije stroja X/Y/Z: pribl. 450mm/3750mm/2800mm, teža: pribl. 6700kg, krmilje: Hurco Ultimax 4. Dokumentacija na voljo. Ogled na lokaciji je možen. Itsdpoyh Nvmjfx Al Njf

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.060 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, model krmilnika: Ultimax, skupna višina: 2.800 mm, skupna dolžina: 2.200 mm, skupna širina: 2.400 mm, širina mize: 610 mm, dolžina mize: 1.270 mm, moč vretenovega motorja: 18.000 W, število vreten: 1, število mest v zalogovniku orodij: 24, Oprema: dokumentacija / priročnik, transportni trak za ostružke, 3 axes Itjdpfx Aowtdzrel Nef Tool holder SK 40 Internal cooling 35 kVA approx. 7550 kg Comprehensive tool package available separately

Stanje: rabljeno, Leto izdelave: 2013, številka stroja/vozila: 5279, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.600 mm, pomik po osi Z: 1.300 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 22 obr/min, Year of manufacture: 2013 Control system: SIEMENS Sinumerik 840D pl Tool holder: HSK 100-A TRAVEL PATHS Horizontal longitudinal (X axis): 8,000 mm Spindle slide vertical (Y axis): 1,600 mm Spindle horizontal cross (Z axis): 1,300 mm WIRELESS PROBE: m&h HSK 100 SIEMENS HANDHELD OPERATION DEVICE B-MPI INTEGRATED OPERATING PLATFORM 3-SIDED SPLASH AND CHIP GUARD CHIP CONVEYOR CLAMPING PLATE Dimensions: Length: 10,000 mm; Width: 2,500 mm WASHDOWN GUN IN WORK AREA REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2,000 l COLLISION MONITORING SYSTEM, 2-CHANNEL unit 2 monitoring channels: - 1st: Collision monitoring for orthogonal milling head (Channel 1) - 2nd: Collision monitoring for universal head (Channel 2) PENDULUM MACHINING WITH 3 WORK ZONES MULTI-AXIS INTERPOLATION FOR FREEFORM SURFACES (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATIONS For universal head, arranged on clamping plate Storage positions: 10 Max. tool weight: 12.5 kg Max. tool length: 200 mm Max. tool diameter: 63 mm Max. tool diameter with free adjacent position: 250 mm Tool holders: HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine: 48 Max. tool diameter (full magazine): 125 mm Max. tool diameter (free adjacent positions): 250 mm Max. tool length: 500 mm Max. tool weight: 25 kg Max. tool load torque: 40 Nm Tool holder: HSK 100-A HEAD CHANGE MAGAZINE 1 UNIVERSAL HEAD WITH HIGH-FREQUENCY SPINDLE AUTOMATIC UNIVERSAL HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE - High-frequency milling spindle: - Integrated HF spindle - Tool holder: HSK-A 63 (DIN 69893) - Main drive power: 20 kW at 100% duty cycle or 25 kW at 40% duty cycle - Speed range: up to 20,000 rpm - Spindle bearings with permanent grease lubrication - Air seal - Torque: 40 Nm at 100% duty, 50 Nm at 40% duty - Automatic tool clamping - Power transmission as per speed-power diagram GMN HCS 170 - Technical data according to data sheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN - Liquid-cooled milling head - Cast iron construction (GGG 60) - Milling head, automatically swiveling, 180 x 1 degree - All resulting positions programmable and executable via CNC - Repeat accuracy at spindle nose ±0.002 mm, indexing accuracy ±3 arcsec - Tool holder: HSK 100-A - Milling spindle with hydromechanical quick-change system - Tool pull-in force: 45 kN - Internal coolant supply, Form A-D Ijdpsu Sppwofx Al Notf - External coolant supply via shower ring - Speed range: 22 – 4,000 rpm MAIN DRIVE By a frequency-controlled, liquid-cooled AC motor with: 32 kW output at 100% duty cycle, 46 kW at 40% duty cycle. Direct drive without gear, for zero heat build-up or gear wear. Torque: 637 Nm at 100% duty, 875 Nm at 40% duty.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 610 mm, pomik osi Y: 510 mm, pomik po osi Z: 610 mm, skupna višina: 2.500 mm, skupna dolžina: 2.200 mm, skupna širina: 2.400 mm, dolžina mize: 760 mm, širina mize: 510 mm, obremenitev mize: 1.000 kg, For sale is a 3-axis CNC milling machine from Hurco, model VMX 24. Technical data: - Year of manufacture: 2001 - Control unit: Winmax 4 - X axis: 610.0 mm - Y axis: 510.0 mm - Z axis: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. workpiece weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm - Height: 2500.0 mm - Weight: 4700.0 kg - Number of tool pockets: 24.0 Pull studs seen in the photos are not included in the offer. Transport and loading can be organized Europe-wide upon request for an additional charge. All prices are subject to VAT. Isdpev Tcfkefx Al Notf Inspection possible by appointment. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Wall-mounted slewing crane DEMAG type KBK 2 Demag serial no. jib arm: KBK-982 040 44 Demag serial no. wall bracket: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Jib outreach: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height underside jib to top edge wall bracket: 1000 mm Flange plate wall bracket to centre of pin: 270 mm Total length flange plate wall bracket to jib tip: 4330 mm - Jib profile C-profile rail DEMAG KBK 2 - Trolley for C-profile rail DEMAG KBK 2 - Original paint, yellow Dead weight: 170 kg In very good condition Ijdpfx Astqwrvjl Njtf Price without chain hoist – Chain hoist or crane also available in the shop.

Stanje: pripravljen za uporabo (rabljen), Vertikalni obdelovalni center Haas VF-5B/40HE, letnik 2006. Iodpfxsw H R H Ij Al Notf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.400 mm, hitrost pomika os X: 30.000 m/min, hitrost podajanja osi Y: 30.000 m/min, hitrost podajanja os Z: 30.000 m/min, največja hitrost vretena: 2.000 obr/min, dolžina mize: 4.000 mm, širina mize: 2.000 mm, CNC Bed-Type Milling Machine SACHMANN RAMBAUDI - MP-212 HS KOSMO 3 Universal Milling Head SK-50, 0.02°, 1195 Nm Spindle Extension L = 600 mm with 2000 rpm 3D Probe MP60 ATC Chain with 80 positions Coolant System 1320 l, 4.8 bar Rotary Table 2000 x 1600 x 15 t V-Axis (Feed) 1500 mm Rotational Speed 3 rpm Heidenhain RON 700 Rotary Encoder for Table Rotation Ram Size 500 x 500 mm with 56 kW Chip Conveyor X-Axis: 6000 mm Y-Axis: 2000 mm Z-Axis: 1400 mm Table Length: 4000 mm Table Width: 2000 mm Itedpfjx Nh H Dsx Al Nef Table Load Capacity: 25,000 kg Spindle Motor Power: 37 kW Spindle Speed: 2000 rpm Tool Holder: 50 ISO/BT/MK Feed Rate X-Axis: 30,000 mm/min Feed Rate Y-Axis: 30,000 mm/min Feed Rate Z-Axis: 30,000 mm/min Automatic Milling Head Index: 2.5 x 2.5° Length: 15,000 mm Width: 8,000 mm Height: 6,000 mm Weight: 85,000 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. They therefore do not constitute representations or contractual terms. We recommend verifying all critical details.

Stanje: dober (rabljeno), KONDIA B 1370 Machining Centre Table size: 1350 x 700 mm X-axis travel: 1300 mm Y-axis travel: 700 mm Z-axis travel: 700 mm Spindle speed: 10,000 RPM Motor power: 21 kW Control unit: Heidenhain ITNC 530 i Tool capacity: 22 Tool holder: ISO 40 Electronic handwheel: Yes Through-spindle coolant: Yes Spindle chiller: Yes Itodjug T E Njpfx Al Nsf Chip conveyor: Yes Dimensions with chip conveyor (W x L x H): 3097 x 4650 x 3561 mm Weight: 13,500 kg