Klinaste vpenjalne naprave 5 do 100 kN

Hounsfiel Zwick Keilspannzeug 5 bis 100KN

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line For all inquiries, please contact 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Isdpfjilqvrjx Ab Ajib Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ekscentrična granulacija EGR se uporablja pri proizvodnji temperaturno in strižno občutljivih plastik. Posebej je zasnovana za granulacijo mehkega PVC, trdega PVC, HFFR receptur ali spojin na osnovi elastomerov za nizko-, srednje- in visokonapetostne kable. Ijdpfx Aew Iu T Tob Ajib Poleg tega se lahko naprava uporablja tudi kot klasični ekstruder z enim polžem za različne namene predelave. • Premer polža: 200 mm • z odvzračevalno cono • Pogonska moč: 72,5 kW

Stanje: rabljeno, Regoplas RT50 termo-olaj hőmérsékletszabályozó egység, termo-olaj 300°C-ig Iededmn E Hjpfx Ab Aoib

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) Ijdpfxeg Ezaro Ab Ajib - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: zelo dobro (rabljeno), Automatic Filling Line Logdos Späth GmbH Type: K-DOS.F/AL 40/EX For filling liquids into buckets, hobbocks, IBC containers, and drums Explosion-proof (EX rated) Mobile, mounted on castors Compact dimensions: 3m x 2m x 2m (L x W x H) Programmable X/Y axis and pallet pattern Isdjiyytqepfx Ab Ajib Very good condition, directly from production!

Leto izdelave: 2001, stanje: rabljeno, • Heating plate size (mm): approx. 1500 x 2700 • Max. usable area (mm): 1250 x 2450 • Loading side (mm): 1500 Iijdpfx Abokt N Hue Ajb

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1996, Universal Tool Milling Machine KUNZMANN WF 4/3 With 3-axis Heidenhain digital readout Year of manufacture: 1996 Travel distances: X 400 mm, Y 320 mm, Z 400 mm Speed range: 40 – 2550 rpm Including the following accessories: Rigid angle table, 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axis Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine lamp 4 machine feet Coolant system Operating manual Iiodpfjq Ulucex Ab Aeb THE MACHINE WAS USED EXCLUSIVELY FOR APPRENTICE TRAINING!! THE MACHINE IS IN GOOD CONDITION!!

Stanje: novo, Leto izdelave: 2025, Mechanical Guillotine Shear for Sheet Metal METFORMER HCO-2x2000mm The shear is made entirely of steel, with a solid and heavy-duty construction. It features a simple design with a good appearance and is easy to operate. This shear is widely used for cutting thin and medium-thickness steel sheets in light machinery manufacturing and equipment production. The blade is made from a super-strength steel alloy. Technical specifications: Model: HCO-2x2000 Motor power: 3.0 kW Iedpfx Abefwmyde Asib Maximum sheet thickness: 2 mm Number of cutting edges per blade: 4 Length: 2800 mm Width: 1260 mm Height: 1300 mm Weight: 1350 kg

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Na voljo je laboratorijski kroglasti mlin Netzsch. Pogonska moč: 1,5 kW, hitrost vrtenja: 4200 obr/min, območje premera kroglic: 0,05 mm–2 mm, skupni volumen kroglic: 140 ml, največji volumen izdelka na serijo/cirkulacijo: 140 ml/500 ml, največja viskoznost izdelka: 5000 mPas. Dimenzije stroja (D/Š/V): cca 850 mm/600 mm/700 mm, teža: cca 100 kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Iodpfxjxvrt Sj Ab Asib

Leto izdelave: 1980, obratovalne ure: 36.000 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11360, Iščete zanesljivo in stroškovno učinkovito rešitev? Ta rabljeni ekstruder ponuja odlično zmogljivost po bistveno nižji ceni kot nov model. Stroj je dobro vzdrževan in popolnoma funkcionalen, idealen za obdelavo PVC-ja. Popolna izbira za proizvajalce, ki želijo povečati proizvodnjo brez visokih stroškov. Za več informacij nas kontaktirajte! Iedpfx Asvuquvjb Aeib