Sejalna naprava bobnasta sejalna naprava

Horstkötter Trommelreiniger TTR630

Stanje: rabljeno, Leto izdelave: 2023, Used installation Year of construction: 2023 Condition: as new, system has only a few operating hours Equipment and technical data: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and chips - Fan: 2 x 7.5 kW - Airflow: 10,000 m³/h - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs, each 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Pressure relief area: 0.84 m² (bursting disks) - Base frame with discharge hopper and rotary valve; dry discharge system with C-coupling Consisting of: - ECO JET DUO 6 UPPER SECTION, 2 x 7.5 KW: Clean air filter unit; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; including pressure relief area and Dry discharge system with C-coupling; without filters and control system; including pressure transducers - ECO JET DUO 6 ZWR XL – 1100 MM: Bwjdpsyk I U Asfx Agqjp Extension ring for increasing height/expansion with 2 suction inlets for extraction stubs - Substructure with discharge hopper and built-in rotary valve 960/1 FG: For chip disposal via customer-provided transport fan into an existing silo or similar; Transport duct DN 200 mm, approx. 1,260 mm length under rotary valve; connection to customer’s transport duct Rotary valve certified according to ATEX directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class/construction: IP 54 / B3 Insulation class: F Speed: 41 rpm Throughput*: 15,744 l/h* No. of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pieces required Filter BIA Category ‘M’ – electrically conductive; 2.50 m length, incl. support cages; 77.6 m² filter area - Suction stub 400 mm: with non-return flap in rectangular duct - ECO JET non-return flap 910x346x500 mm - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency converter up to max. 37 kW; suitable power modules and controls as well as the frequency converter are included in the base unit; the frequency converter is installed in the control cabinet. Cascade control with frequency converter handover: Fan 1 runs on the frequency converter; when the threshold value is reached, it switches to mains operation; fan 2 takes over the frequency converter and adjusts as required. Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault message Display of fault message in clear text on the display and collective fault lamp on the door Manual start of discharge via display button Start cleaning via differential pressure Manual cleaning start via button Post-cleaning Fire protection monitoring

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. ----- AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Bodpfowbknbjx Agqjwp Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), Aluminium angle conveyor belt including mobile undercarriage Horizontal section: 1,100 mm Inclined section: 1,500 mm Angle of incline at bend: 60° Total belt length: 1,750 mm Discharge height: approx. 1,600 mm Height of horizontal section: 300 mm (infeed height) Conveyor belt width: 500 mm PU conveyor belt incl. carriers and wave edge, petrol matt finish Drive: Motor 0.25 kW, speed 0.2 m/sec Connection: 220/240V, 50Hz, protection class IP54 Bodoi Igikopfx Agqewp Drive and components ready to connect, motor control optional 4x fully swivelling transport castors with parking brake 2 pcs. wave edge 50x35 mm 11 pcs. T-50 cleats centrally welded – 481 mm pitch 2-ply, especially cross-stable Usable width 290 mm, calculated as follows: Crosswise arrangement -70+30-5+290-5+30-70 mm

Stanje: rabljeno, Št. 10019 Različni transportni in tračni transporterji Bjdpfxewhp H No Agqjwp Rabljeno Sestavljeno iz 6 pozicij Poz. 1: Moder transportni trak, približno 8000 x 800 mm (D x Š), uporabljen za odpadke Poz. 2: Oranžen transportni trak, približno 12000 x 1200 mm (D x Š), skoraj nov Poz. 4: Dva modra premična transportna trakova, vsak približno 10000 x 800 mm (D x Š) Poz. 5: Dva turkizna transporterja, 1. trak približno 10000 x 1600 mm (D x Š), 2. trak približno 4500 x 1400 mm (D x Š), zelo robustna – s kovinskim dnom, vsak potrebuje nov motor in menjalnik Poz. 6: Moder transporter znamke Westeria, približno 14000 x 1200 mm (D x Š) Poz. 8: Zelen mobilni Z-transporter, približno 7000 x 500 mm (D x Š), nov pas, skoraj nov Prodaja po naročilu stranke, iz lokacije v bližini 85456 Wartenberg, brez razstavljanja, transporta in montaže Pridržujemo si pravico do napak v opisu in ceni Razstavljanje, transport in natovarjanje lahko po dogovoru uredimo mi Za preprečitev morebitnih nesporazumov je priporočljiv ogled na lokaciji po predhodnem dogovoru Prodaja v stanju "kot je" Tehnični podatki, opis stanja, letnik izdelave in obseg dobave po katalogu proizvajalca oz. prejšnjega lastnika, brez garancije Možen vmesni prodaj Za rabljene stroje je vsakršna garancija izključena, velja načelo: "kupljeno kot videno" Slike in videi so zgolj primeri in ne predstavljajo dejanskega obsega dobave Plačilni pogoji: cene so brez DDV, plačilo pred prevzemom oz. pošiljanjem Dobavni pogoji: iz lokacije

Leto izdelave: 2000, stanje: rabljeno, Drais Mannheim / Lödige CoriMix® CM Bwedpfeh H S Hdox Agqjp Type: K-TT 700 Motor: 55 kW 1500rpm Fully stainless steel construction (including frame)

Stanje: novo, Novo naprava MASS International Odkładni transportni trak NPS Transportni trak/odkładni trak Kratkoročno dobavljivo Odkładna površina brez stranske stene višinsko nastavljivo, premično na vrtljivih stop kolesih Primer: NPS 1 dolžina 1500 mm uporabna širina 250 mm zunanja širina 250 mm (brez motorja) odkładna površina brez stranske stene, zato polna uporabna širina višinsko nastavljiva oddajna višina 200 - 400 mm PU jermen gladek, črn hitrost jermena 3 m/min transportni trak premičen na vrtljivih stop kolesih Navedena ponudbena cena velja za NPS1. Bwsdoizi S Djpfx Agqep Opcijsko: Mere po željah stranke pas primeren za živila (v skladu z FDA) spremenjena hitrost jermena frekvenčni pretvornik za brezstopenjsko nastavitev hitrosti jermena itd.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Are you looking for a robust conveyor belt for infeed or outfeed? We manufacture them for you in any size or configuration. Bodpet Iwgnofx Agqswp We are also an excellent partner for your screw conveyors. Discharge belts and feed belts can be supplied in almost any size, equipped with sealed sidewalls, cleats, and more – fully tailored to your requirements and specifications.

Leto izdelave: 2024, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Nr.50086, Nova naprava na prodajo zaradi okoliščin: 6 priključnih mest z prezračevalnim kanalom. Samo osebni prevzem! Cena iz lokacije 31637 Rodewald. Bedpow Uf S Hefx Agqswp

Leto izdelave: 1986, stanje: dober (rabljeno), Rotating unit for edge processing, turning station, turning table, rotation station, rotary table, conveyor system, roller conveyor Bwjdpfxeb Rynye Agqjp -for edge banding machine, edge bander -Turning station: for rotating workpieces -Roller conveyor: narrow -Roller width: 1300 mm -Roller conveyor length: 2900 mm -with adjustable impact wall -Roller conveyor: wide -Roller width: 3400 mm -Roller conveyor length: 1400 mm -Rotary head roller: rubber-coated -Transport dimensions: 3000/1500/H960 mm, 3500/1550/H1850 mm -Weight: 1000 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Aluminium Z-shape conveyor belt with substructure including adjustable feet and freely swiveling transport castors with locking brakes Bedpfxoyhzhns Agqswp Horizontal section: 800 mm Ascending section: 3,000 mm Second ascending section: 1,200 mm Incline angle at each bend: 60° Total conveyor length (measured on the ground): 3,500 mm Height of the horizontal section: 400 mm Design: Aluminum construction design - Double-reinforced profile 90x45 mm - Full-surface discharge plate, 2.0 mm galvanized Drive roller + return roller S235 steel, welded and machined Ø100x720 mm, cambered and turned, shaft fixed with pillow block bearings Drive: Direct-mounted gear motor, 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU with waved PU edge in petrol, matte, AS, especially cross-stable with hard cover Conveyor belt width: 700 mm 2 pcs. waved side edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats centrally positioned, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a borderless zone of 70 mm on each side. Due to the waved side edges, the usable width of the conveyor belt is reduced: Usable width: 500 mm, comprised as follows: (Top view) Lateral arrangement 70+25+5+500+5+25+70 mm Belt guidance via PVC guide strip on running surface profile - 10x6 mm - including cutout in the discharge plate - including slide bushings in the drive and return rollers