Stroj za lepljenje robov Homag Edgeteq S 200 2018 s predrezkanjem

Homag

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Ihsdpfx Aoyqybuodkow Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, delovna širina: 1.935 mm, število vreten: 40, višina plošče: 350 mm, delovna dolžina: 6.200 mm, število osi: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in the tool magazine: 22 (at the rear of the machine) Isdpfx Asyqx U Hsdkjhw Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X-direction: 4 Spindles for horizontal drilling in Y-direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum pods for securing the workpiece Safety mats at the front Vacuum pump Chip conveyor Fixed grooving unit for grooves in X-direction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and accepts responsibility for installation, securing, and use of the machine at the destination. External reference: 8105

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, moč: 19 kW (25,83 KM), potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.730 mm, število vreten: 20, Število orodnih postaj v orodni glavi 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverse beams: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Iedpsyttf Sjfx Adkohw Total installed power: 19 kW CNC controller model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied as available (left side only). The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.550 mm, višina obdelovanca (maks.): 40 mm, število vreten: 30, največja hitrost vožnje: 80.000 mm/min, TECHNICAL DETAILS Travel Range X-axis: 4,175 mm Travel Range Y-axis: 1,550 mm Traverse Speed X-axis: 80 m/min Traverse Speed Y-axis: 80 m/min Traverse Speed Z-axis: 30 m/min Max. Workpiece Height: 40 mm Number of Suction Traverse Bars: 8 Spindles Number of Spindles for Vertical Drilling: 20 Number of Spindles for Horizontal Drilling in X-direction: 10 Total Number of Spindles: 30 Milling Unit Number of Controlled Axes: 4 + Flex5 Motor Power: 15 kW Automatic Tool Changer Liquid-cooled Saw Unit Tool Magazine 1 Number of Positions: 18 Tool Magazine 2 Number of Positions: 10 EQUIPMENT NC Positioning Suction Units Vacuum Pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Ihjdpfeyttcwex Adkow External reference: 7350

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min Ihjdpfx Ajytr Hbsdkow MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled 'FLEXIBLE' MACHINING CENTER Moving platen (workpiece), static workhead – horizontal platen (workpiece) Control: PowerControl PC86 powerTouch (woodWOP software) Safety enclosure for the working head 2 workpiece clamping cylinders within the working area WEEKE pre-positioning unit for rapid positioning of workpieces in machines with clamping grippers. Support table (workpiece support) at infeed – outfeed table (with powered conveyor belt) With automatic plate pusher Minimum workpiece dimensions (X-Y-Z): 200 x 70 x 8 mm (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z): 3000 x 1000 (option 1300) x 80 mm (2 x 40 mm) Simultaneous processing of two workpieces (in Z-axis) With separate electrical and control cabinet WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW - 42 Independent vertical drilling spindles (drilling head power 2.3 kW) Iedjyu S I Iepfx Adkshw - 10 Independent horizontal drilling spindles (8 in X, 2 in Y) - 1 Grooving saw unit (pivotable 90° in X-Y direction), blade diameter: 125 mm - 1 Vertical main spindle (milling unit) ETP (vertical main spindle power: 6 kW) WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW - 42 Independent vertical drilling spindles (drilling head power 2.3 kW) - 10 Independent horizontal drilling spindles (8 in X, 2 in Y) - 1 Grooving saw unit (pivotable 90° in X-Y direction), blade diameter: 125 mm - 1 Vertical main spindle (milling unit) ETP (vertical main spindle power: 6 kW)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Specifikacija: Dolžina reza: 4300 mm Širina reza: 4300 mm Izmet žaginega lista: 80 mm Upravljalni zaslon na desni strani Isdeyuw Umepfx Adkshw Delovna miza stroja popolnoma zračno oblazinjena Hitrost programskega prislona naprej: 25 m/min Hitrost programskega prislona nazaj: 90 m/min Standardne spone: 225, 325, 475, 775, 1075, 1825, 3425 mm Power Concept – omogoča sočasno rezanje več trakov z različnimi dolžinami prečnega reza z do 40 % večjo zmogljivostjo Nadzor višine pritisne letve Hitrost vozička žage: 130 m/min Glavni motor žage: 11 kW s pnevmatskim dvigom Predrezovalna enota: 1,5 kW s pnevmatskim dvigom Elektronska nastavitev predrezovalne žage preko upravljalnega zaslona 4 zračne mize: 2160 x 650 mm Tiskalnik etiket 400 V, 50 Hz Upravljalni zaslon na dotik Control Touch Prenos podatkov prek omrežja in USB priključka CE Eco Plus tehnologije omogočajo do 20 % prihranka energije

Stanje: zelo dobro (rabljeno), EINSEITIGER KANTENANLEIMER (links) Kanten (Band auf Rollen) Dicke (min/max) mm 0,3 / 3 Ihedpeyt Izbefx Adkow Kantenstärke in Streifen / Leisten (min/max) mm 0,4 / 20 Plattenstärke (min/max) mm 8 / 60 NEU (2024) Numerische Steuerung EDGETEQ MOD - Power Touch (WoodCommander) Einstellbare Vorschubgeschwindigkeit bis zu 25 m/min Zuführsystem EZ 14 Sprühvorrichtung (Antihaftmittel) Anschlaglineal, per N.C. verstellbar Vorfräseinheit (vertikale Fugenfräser) 2 x 3 kW Leimeinheit (P.U.R.-Leim + Schnellschmelzsystem) Druckzone für das Band, per N.C. einstellbar Kantenrollen-Halteeinheit (mit 2 Abrollern) Abschneideeinheit HL 84 (2 x ca. 0,5 kW) Pneumatisch schwenk- und einstellbar Grobschneideeinheit BF 20 (2 x ca. 1,5 kW) Multifunktionseinheit (Konturfräsen) FK 11 (2 x ca. 0,4 kW) Konturabzieheinheit Feineinheit (Leimabzieher + Poliereinheit) FA 11 Plattenrückführungssystem "LIGMATECH" Mod. ZHR 541/L/095 (mit Portalbrücke und 360° drehbarem Vakuumkopf)

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0/200/06/3164, skupna masa: 6.500 kg, skupna dolžina: 12.600 mm, teža obdelovanca (maks.): 5.500 kg, Stroj za mehko oblikovanje robnega traku, v obratovanju, rabljeno stanje, leto izdelave 2003, Isdpfx Aevx Ep Njdkshw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, moč: 7 kW (9,52 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, OPTIMAT BHX055 Ihodeyvh Dpspfx Adkew