Stroj za robno lepljenje

HOMAG, Brandt Ambition 1440

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment (1 pc) Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Nodpfx Adjxfh Tmepjwp Location: Nattheim

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, vrsta nastavitve višine: mehanski, vhodna napetost: 400 V, potrebna višina: 1.200 mm, Edge banding machine equipped with: Njdpfx Ajwy Ugxedpowp - Trimmers - Edging tape magazine - Interchangeable hotmelt glue pot for EVA or PUR - Flush trimming - Corner rounders

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-250-87-6869, Vrtalna glava z 8 vreteni (V8 SW/32) Horizontalna vrtalna glava s 4 vreteni v smeri X Horizontalna vrtalna glava z 2 vreteni v smeri Y Žaga za utore D=100 mm (smer X) Zaporni cilinder za pozicioniranje obdelovanca Sistem za vpenjanje obdelovanca Nedpfx Asvtyc Hjdpowp Dolžina obdelovanca 2500 mm Debelina obdelovanca 12–60 mm WOODWOP za stroj WOODWOP IMPORT DXF BASIC (1 licenca)

Stanje: rabljeno, številka stroja/vozila: 008018, Tip pritrjene obrobe: tanka obroba, močna obroba, masiven les Lepilni sistem: EVA, PUR Spojno rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 20 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 7 kos Nwodpfxowv Dfco Adpep

Stanje: rabljeno, Leto izdelave: 2002, Dolžina stroja: 6240 mm Teža: 2400 kg Priključna moč: 14 kW Premer odsesovanja: 120 / 140 mm Lokacija skladišča: Nattheim Nedpfx Adovvkfwjpowp

Stanje: rabljeno, Leto izdelave: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power requirement: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction capacity: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double upper pressure for workpiece stability Electronic thickness control Feed frequency inverter Automatic lubrication of the feed chain Automatic motor calibration Nwsdov Szt Depfx Adpep Touchscreen control system Emulsion spraying at infeed and outfeed Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with interchangeable knives Motorised cutting depth adjustment Gluing unit Application of glue as well as hot air Heated application roller Quick-change complete unit Automatic positioning via motor 3 pressure rollers Edgebanding speed: 14 m/min End trimming unit Dual-motor unit with automatic tilting Tilting up to 15° THK prism guides Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change with servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Prodajem kantovalni lepilni stroj Biesse JADE 240, godina proizvodnje 2019. Posebna ponuda: Mašina je skoro NOVA! Konfiguracija: - Ulazna zona ručno podešavanje - Spojno glodanje pneumatski podesivo - Lepljenje ivica ručno podešavanje - 2 lepka rezervoara za EVA lepak - Zona pritiska ručno podešavanje - Presecača pneumatski podesiva - Glodanje radijusa ručno podešavanje Nwjdpjxncrvjfx Adpsp - Zaobljeni agregat sa 2 motora ručno podesiv - Povlačna radijus oštrica ručno podesiva - Površinska povlačna oštrica pneumatski podesiva - Polirke Prednji separator za ubrizgavanje Centralno podmazivanje Gornji valjci za uvod Ručna podešavanja visine Visina materijala: 10-60 mm Debljina ivice materijala: 0,4-8,0 mm Brzina uvlačenja: 12 m/min. Samo 9250 m lepljeno. Mašina je skoro NOVA! CE oznaka. Uključuje kompletnu dokumentaciju i CD-ove. Vrlo dobro stanje! Dostupno odmah!

Stanje: rabljeno, Leto izdelave: 2011, skupna dolžina: 4.000 mm, skupna višina: 1.600 mm, skupna širina: 970 mm, Weight: 1,300 kg Price: On request - Year of manufacture: 2011 - Documentation available: No - CE marking: Yes - Serial number: AH/115214 - Number of units: 6 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Gluing unit - └ 3rd unit type: End trimming unit - └ 4th unit type: Rough trimming unit - └ 5th unit type: Radius scraping unit - └ 6th unit type: Flat scraping unit - Max. edge banding thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Power consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (L x W x H) - Transport weight [kg]: 1300kg - Number of transport packages: 1 Financial Information VAT: The price stated is exclusive of VAT VAT/Differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels Nwsdswnickspfx Adpsp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, premer povezave za izpihovanje: 120 mm, izvrtina žagine plošče: 30 mm, globina reza: 110 mm, glavni premer žaginega lista: 400 mm, premer ekstrakcijske šobe: 120 mm, dolžinski omejevalnik: 3.200 mm, delovna širina: 1.100 mm, Oprema: motorna zavora, Format 4 x motion in excellent condition, always operated by a single person. Nwsdpfx Asv Aywpodpjp

Stanje: rabljeno, Leto izdelave: 2014, Power Control PC 22 control unit with WoodWop – POWERTOUCH software. Panel thickness: 8 - 60 mm. PVC/ABS edge thickness: 3 mm. Feed speed up to 25 m/min (20 m/min with corner rounding). Electronically adjustable working height via CNC. Motorized, rubberized belt with superior pressure. Panel support guide and assisted loading for small panels. Controlled infeed guide. Anti-adhesive unit. Pre-milling unit with two 3 kW motors, 9000 rpm, with ball bearings. Glue application unit for PUR adhesive with pre-melter and glue tank. Edge pressure unit for straight profiles with electronically adjustable pressure rollers (CNC-controlled). Trimming unit with two motors (automatic tilt adjustment?). End trimming unit with two motors. Corner rounding unit with two multifunction motors (trimming + rounding) with CNC control. Edge scraping unit. Glue scraping unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS MUST BE VERIFIED. Nedpfxevqbh Es Adpswp