Drsna namizna žaga

Holzmann FKS 305VF-3200

Stanje: dober (rabljeno), UV curing oven for coating line Gsdpfx Ast Ag Uqsfqstt

Stanje: zelo dobro (rabljeno), Volt: 220–240 VAC // Current: 1.8 A // Frequency: 50/60 Hz // Phase: 1 // Power: 0.4 kW WITH OUTFEED CONVEYOR Diverter Belts: For envelope format 10.5 x 14.8 cm and for portrait orientation, the diverter belts should be pushed toward the central transport belt. Rule: For large envelopes, push the diverter belts outward; for small envelopes, push the diverter belts (22) inward. CONNECTION TO THE PRINTING MACHINE Gtjdpfx Aoh Eibaefqot The STENZ FEEDER does not require synchronization. Position the feeder using the handles into the printing machine, and set the required height with the hand crank. Important: Only after setting the printing height should you lock the rear rollers and check the stability. Switch on the machine and commence printing. For single-sheet feeder printing machines (GTO): adjustable tilt. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 printing machines, regardless of feeder system (overlapping / single-sheet feed). – Does not require mechanical modifications to the press – No synchronization adjustments required due to laser technology – Very short setup time enables economical operation from just 1,000 envelopes – Simple operation – The feeder’s design ensures forced overlapping. The throughput of the Stenz Feeder is therefore unrestricted – Minimal wear parts for extremely long service life – Already certified for use in thousands of different printing machines – A Swiss quality product – Designed by printers for printers. Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Stanje: zelo dobro (rabljeno), sliding table saw Robland 3200 Silver Line scoring unit with separate motor, sliding table length: 320 cm main motor: 7 kW 3 spindle speeds maximum blade diameter: 450 mm Gsdpfjv S Hy Ajx Afqett tilt adjustment 0–45° electrically controlled with digital readout blade height adjustment electrically controlled, without readout drip fence (rip fence) on the right, motorized adjustment up to 1240 mm digital readouts on carriage crosscut fence angle-cutting device included Branded machine in very good condition.

Stanje: rabljeno, Paint finishing line consisting of: Item 1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed speed adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller conveyor - Air blast channel, top 2 pcs. - Air blast channel, bottom 1 pc. - Deburring brush - With ionizing bar from above - With ionizing bar from below - With its own drive - With its own control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction stub diameter: 180 + 120 mm - Total connected load: 7.6 kW - Voltage, Hz: 400/50 Item 3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual gun drive - Dry extraction - Extraction stub diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Feed speed steplessly adjustable ~ 4-10 m/min - Belt cleaning system - Paint recovery via V-belt system - Spray gun control: EPS-CNC CNC 7000 - Color management system for 3+1 pumps - Number of installed airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at machine outfeed Gedpov I Akvjfx Afqstt - Exhaust air recirculation system - Extraction fan exhaust air control - Suitable for water-based paints - Suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: approx. 20 - 26 kW - Voltage, Hz: 400/50 - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small quantity container - Gun carrier arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatic and material hoses. Item 4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed speed adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of trays: 30 pcs. - Tray length: 5,600 mm - Usable tray length: 5,300 mm - Load capacity per tray: 300 kg - Max. part height: approx. 110 mm - Clear height between trays: 120 mm - Dimension: tray center to tray center 3,658 mm - Max. part length: approx. 5,200 mm - Number of controllable temperature zones: 2 pcs. - Supply air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Heating capacity max.: 175 kW - Max. drying temperature: approx. 55 - 60°C - With heat exchanger, heating water - Without heating water control valves - Pass-through direction: U-shape - Infeed side: right - Feed speed via frequency control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: approx. 23 kW - Voltage, Hz: 400 / 50 - Voltage fluctuation max. +/- 5 % - Without control valves and water pumps Item 6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed speed adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 590 h, Funkcionalnost: nepreverjeno, Oprema: Osnovni paket Methor veriga Gosenice podvozje z dvema hitrostma vožnje Podvozna veriga 400 mm 3-letveni Gedpfx Afsvnq Rkeqjtt Dodatni hidravlični priključek 70 l/min 24-V električni nadzor Velika popolna radijska daljinska upravljalnik Vzdrževalno prijazen motornim prostor z LED osvetlitvijo Zložljiv lijak s senzorjem položaja in avtomatskim nadzorom Hidravlično reverzibilno ventilatorsko kolo Akustično opozorilo ob zagonu Rezervoar za gorivo 300 litrov Barva: RAL 2011 temno oranžna Dodatna oprema: Gumijaste blazinice za hitro menjavo Motor Cat C7.1, 205 kW Zadnji trak 6,9 m Okvir za nadtrakovni magnet Nadtrakovni magnet Sistem za hitro menjavo valjev na valju Sistem za hitro menjavo valjev na stroju Namakanje LED delovna osvetlitev Dodatna električna črpalka za obratovanje ob mirovanju motorja Gasilni aparat GN 9 A-3 DIN EN 3

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, moč: 200 kW (271,92 KM), Odkrijte zmogljivo napravo za predelavo starega lesa Komptech: rabljeni CRAMBO 5200 E direct iz leta 2016 navdušuje z učinkovitim drobljenjem in prilagodljivimi možnostmi uporabe. Opremljen z zvezdastim sitom Multistar 2-SE, obračalnim trakom, nadpasnim magnetom in krmilnimi omarami, ta naprava ponuja optimalno rešitev za predelavo starega lesa in biomase. CRAMBO 5200 E direct je znan po električnem direktnem pogonu, visokih pretokih in minimalnih emisijah – idealno za podjetja, ki cenijo okolju prijaznost in gospodarnost. Robustna konstrukcija in enostavno vzdrževanje dopolnjujeta celoten paket. Gtodpfx Aexv Acqefqot Tehnični podatki: glejte pod dokumenti (pdf datoteka).

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 200 h, Funkcionalnost: nepreverjeno, Oprema: Osnovni paket Methor z verigo - Podvozje na gosenicah z dvema hitrostma vožnje - Gosenica 400 mm, 3-rebrasta - Dodatni hidravlični priključek 70 l/min - 24-V električno upravljanje - Velika popolna radijska daljinska upravljalna enota - Motorni prostor prijazen za vzdrževanje z LED lučjo - Preklopni lijak s senzorjem poti in avtomatskim upravljanjem - Hidravlično reverzibilno ventilatorsko kolo - Akustično opozorilo ob zagonu - Rezervoar za gorivo 300 litrov - Barva: RAL 2011 temno oranžna Dodatna oprema: - Gumijaste blazinice za hitro menjavo - Motor Cat C7.1, 205 kW Gtsdpfx Afovnq Troqjt - Zadnji trak 6,9 m - Sistem drobljenja velikosti L (8 zob) - Okvir za nadtrakovni magnet - Nadtrakovni magnet - Sistem hitre menjave valja na valju - Sistem hitre menjave valja na stroju - Namakalni sistem - LED delovna razsvetljava - Dodatna električna črpalka za upravljanje ob zaustavitvi motorja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Used steam boiler Gjdpfx Afetuwc Uoqett Manufacturer: Riello Year of manufacture: 2001 Мы говорим по-русски! (We speak Russian!) Viewing strictly by prior telephone appointment only! Preferred sale to dealers, commercial users, or export. All information without guarantee. Subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. Of course, we can also take care of all formalities. Loading possible.

Stanje: zelo dobro (rabljeno), Motor 5.5 kW Table length 2 m Table width 52 cm 4 knives Godpfx Afewm Dz Sjqott Working height 19 cm Top and bottom sides electrically adjustable

Stanje: dober (rabljeno), Technical Data for the Shelving Unit: Shelving System: SSI Schäfer Type: R 3000 Godpfx Aet Hdgfsfqott Technical Assembly Data: Number of Shelf Rows: 01 unit Shelf Row Length: approx. 1,340 mm Number of Bays per Row: 01 unit x 1,280 mm Number of Levels incl. Base Level: 08 units Scope of Delivery Includes: 02x Upright Frames, 2nd choice Material finish: Sendzimir galvanized Frame profile dimensions: 31 x 60 mm Including horizontal and diagonal bracing Uprights delivered unassembled Height: 1,534 mm Depth: 300 mm 08x Shelves, 2nd choice Material finish: Sendzimir galvanized Dimensions: 1,282 x 300 x 30 mm For frame depth: 300 mm Weight per piece: approx. 4.79 kg 01x Base Panel, used Material finish: Sendzimir galvanized Dimensions: C 28 x 22 x 8 x 0.6 mm Weight per piece: 0.71 kg 01x Cross Brace, 2nd choice Designation: KV31013 Material finish: Sendzimir galvanized 48x Open Front Storage Bins, 2nd choice (new) Manufacturer: SSI Schäfer Type: LF 321 G Color: dark grey Material: polypropylene External dimensions (LxWxH): approx. 209 x 145 x 343 mm Weight per piece: 0.550 kg Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. If shipping or transportation is required, this will entail additional costs, which can be provided separately depending on delivery location or order volume.