Pločevinasta žaga

HOLZMA HPP 380

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 4.300 mm, dolžina obdelovanca (maks.): 4.300 mm, širina obdelovanca (maks.): 2.200 mm, višina plošče: 60 mm, Submission of a bid obligates the buyer to collect the items within the specified deadline, by calendar week 02/2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination of two Holzma saws connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data - Cutting length: 4,300 mm - Lift cut size: 4,300 mm x 2,200 mm - Maximum panel size for lift table loading: 4,300 mm x 2,200 mm - Minimum panel size for lift table loading: 1,200 mm x 400 mm Stacking Heights - Maximum stack height on lift table (floor level installation): 560 mm - Maximum stack height on lift table (pit installation): 780 mm - Maximum load capacity, lift table: 4 t Tedpsxy Ng Refx Abgof Roller Rails - Roller rail element, 10-track: 1 unit - Roller rail element, 2-track: 6 units Clamping Grippers - Spacing: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables - Extraction device position: 2,375 mm - Air cushion table with rollers, 2,160 x 800 mm: 1 unit - Air cushion table with rollers, 2,160 x 650 mm: 3 units - Central blower: 1 unit - Nozzle line for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data - Cutting length: 4,300 mm - Cutting width (program pusher stroke): 4,250 mm - Saw blade projection: 95 mm Combination and Clamping Gripper System - Combination profile rail element, 2-track: 9 units - Clamping grippers: 7 units - Spacing: 75/275/475/1,050/1,850/2,650/3,450 mm - Manual trim stops at grippers: 4 units (position 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction - Air cushion table with roller elements, 2,160 x 650 mm: 4 units - Central blower: 1 unit - Nozzle line for air cushion tables: 70 x 70 mm Feed and Program Pusher - Saw carriage feed, forward: 1–130 m/min - Saw carriage feed, backward: constant 130 m/min - Program pusher speed, forward: 80 m/min - Program pusher speed, backward: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System - Integrated length measurement - Integrated width measurement - Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Wide Belt Sander DMC USK 1350 M3 – Italian-made – Cross-belt unit, also known as a 'sergeant' unit – Year of manufacture: 2011 – Equipped with both electric and pneumatic ionizers Tjdpfogr Er Sox Abgjf TECHNICAL SPECIFICATIONS: Maximum sanding width: 1350 mm Sanding height range: 4–170 mm Minimum workpiece length: 365 mm Vacuum table 1st Unit: – Cross-belt (sergeant-type) – Motor power: 12 kW 2nd Unit: – Rubber roller – Hardness: 95 Shore – Diameter: 240 mm – Motor power: 18.5 kW 3rd Unit: – Rubber roller – Hardness: 55 Shore – Roller diameter: 300 mm – Motor power: 15 kW 4th Unit: – Pneumatic pad – Motor power: 15 kW 5th Unit: – Cleaning brush – 2.2 kW 6th Unit: – Air blower – Blowing on belt – Pneumatic oscillation Feed speed: 2.5–18 m/min Pneumatic belt tensioning Electric height adjustment Extraction port diameters: 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 x 250 x 250 cm Weight: 5000 kg

Stanje: zelo dobro (rabljeno), obratovalne ure: 565 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-240-10-3388, vključno s skladiščnim in dovajalnim sistemom za plošče, Bargstedt, Tip: OPTIMAT TLF210 /12 /12 Prebrani delovni čas: 565h Dolžina reza: 4300 mm Širina reza: 4250 mm (hod programskega potisnika) Izstop žaginega lista: 95 mm Glavni motor žage: 13,5 kW Motor predrezila: 2,2 kW POWER CONCEPT PAKET ZA KOTNI REZ Tsdpfx Aow R Ur Ujbgof PAKET ZA IZREZ UTOROV AVTOMATSKO IZMETNO PRAVILO (potiska ploščne ostanke s hrbtne mize stroja čez rezalno črto naprej) PAKET ZA ETIKETIRANJE KRMILJENJE: POWER CONTROL: CADmatic 4- Professional POVEZAVA PODATKOV S SKLADIŠČNIMI SISTEMI

Stanje: rabljeno, številka stroja/vozila: 005108, Položaj 1: Krožna žaga za plošče – podajanje od spredaj HOLZMA-HPP 380/43/43 + TLF Todpfx Aswuck Ijbgsf Položaj 2: Horizontalno skladišče HOLZMA-HPP 380/43/43 + TLF

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot Tsdpjxfh Tmjfx Abgsf - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment (1 pc) Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Location: Nattheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.300 mm, dolžina pomika po osi Y: 4.300 mm, dolžina rezanja (maks.): 4.300 mm, višina reza z zareznim rezilom (max.): 4.300 mm, premer žaginega lista: 380 mm, HPP 380/43/43, popolnoma avtomatsko nalaganje s TBP 200/31/22/ Glavni motor 18,5 kW Tedpfx Abexvz T Isgjf Stroj deluje odlično, možen preizkus delovanja Holzma Profi HPP 380 Dolžina reza: 4.300 mm Širina reza (programsko voden pomik potiskača): 4.250 mm Miza z zračno blazino: 2.160 x 650 mm, 3 kos + 1* 2.810 mm dolžine Centralni puhalnik: 1 enota z izboljšano zmogljivostjo puhanja 2 dodatni napravi za poravnavanje Tehnični podatki: Izvlek žaginega lista: 95 mm Podajanje vozička žage: naprej 1–130 m/min, nazaj stalno 130 m/min Glavni motor žage: 18 kW Predrezovalni motor: 2,2 kW, VVSH agregat, programsko voden, vertikalno dvižen Obratovalna napetost: 400 V (+10%/-5%) / 50 Hz Električna priključna moč za glavni motor žage 18 kW: 24 kW Krmiljenje Power Control CADmatic 4.0 s 17-palčnim ravnim zaslonom Označevanje z grafiko kosov / program etikete / tiskalnik etiket PICA 104

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Panel dividing saw Manufacturer: HOLZMA Model: PROFI HPP 380/43/43 Year of manufacture: 2007 Tjdpfx Asv N D E Robgef Dimensions: approx. 13,000 x 6,540 x 2,100 mm Equipment/features: - Total connected load: 20.0 kW - Can be combined with an automatic material feed system - Max. cutting length: 4,300 mm - Max. program pusher travel: approx. 10,000 mm - Saw blade projection: 95 mm - Saw blade diameter: 380 mm - Main saw motor power: 13.5 kW - Automatic cutting height adjustment - Scoring unit or post-forming unit - Scorer blade diameter: 180 mm - Scoring unit power: 2.2 kW - Saw carriage feed speed: 5 – 130 m/min - Saw carriage adjustment: Infinitely variable - Program pusher feed speed: 1 – 25 m/min - Angle pressure device - Number of clamps: 7 - Clamp opening width: 95 mm - Lifting unit for raising clamps - Clamp lift height: 290 mm - Automatic labeling - Label printer - 90° rotation table for panels up to max. 4,300 x 2,200 mm - Schuler MDE software for user data acquisition and evaluation - Swiveling control panel Machine is still in operation and can be inspected. Available as of early August 2025. Location: Sauerland

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), An angular processing line for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, tenoning spindle length: 640 mm, profiling and feed pass length: 285 mm–320 mm, control system: Siemens WS400. Includes complete tool set and sash window tooling. Documentation available. Todpfx Abjtq U A Ijgsf

Stanje: rabljeno, No. 3248 Horizontal Panel Saw HOLZMA Optimat HPP 380/38/38 Used, year of manufacture 2003 Todpfexrglnox Abgsf Machine still in operation, expected to be available from 19.01.2026 Cutting length: 3800 mm Cutting width: 3700 mm Saw blade projection: 95 mm Main saw motor: 13.5 kW Scoring saw motor: 2.2 kW Main saw blade: 380 x 4.8 x 60 mm Scoring saw blade: 180 x 4.8 - 5.8 x 45 mm 7 clamping grippers 3 air cushion tables, 1 with angle stop 3 roller elements at the front of the ACT Operating software: Schnitt Profi(t) 9.0 / CADmatic V3.0 15" monitor (replaced in January 2025) V-program slider up to 80 m/min V saw carriage up to 130 m/min Machine dimensions: 7205 x 6100 mm (L x W) Sale on behalf of customer, ex location near 90471 Nuremberg, without disassembly, transport, or installation Disassembly, loading, and transport optionally available by us Errors in the description and price excepted To avoid possible misunderstandings, inspection on-site by appointment is possible and recommended Sale is as-is Technical details, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as seen Photos and videos are examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 4.300 mm, največja širina rezanja: 4.250 mm, model krmilnika: Power Control CADmatic 4.0, Set de machine à scier Holzma pour le découpage des panneaux et système de magasinage Bargstedt! Holzma HPP 380/43/43/R DÉTAILS TECHNIQUES Longueur de coupe : 4 300 mm Largeur de coupe : 4 250 mm Saillie de la lame de scie : 95 mm Moteur principal de scie : 18 kW Moteur de la lame inciseur : 2,2 kW Tension d'alimentation : 400 V (+10%/-5%) / 50 Hz DÉTAILS DE LA MACHINE Commande : Power Control CADmatic 4.0 avec écran plat de 17 pouces Tension d'alimentation : 400 V (+10%/-5%) / 50 Hz Puissance totale requise : 29 kW ÉQUIPEMENTS Programme de rainurage Programme de découpe/relâchement de tension Étiquetage / programme d'étiquettes / imprimante d'étiquettes PICA 108 Interface de données pour systèmes de magasinage Logiciel d’optimisation de découpe Schnitt-Profit Professional Bargstedt Optimat TLF210/10/05 Tsdpfxsxpu Rgj Abgsf DÉTAILS TECHNIQUES Longueur du chariot mobile : 13,45 m Portée : env. 12,5 m Hauteur max. du dessus de pile dans le magasin : 1 700 mm Taille max. de la pièce : 4 200 x 2 070 mm ÉQUIPEMENTS Entraînement rotatif 1 poste de chargement et 1 poste de déchargement

Stanje: rabljeno, Leto izdelave: 2006, Proizvajalec: Weinig Tjdpfx Asqprk Tjbgjf Model: Unimat Super 4 Leto izdelave: 2006 Štiristranski skobeljni stroj Proizvajalec: WEINIG obnovljen Model: UNIMAT SUPER 4 z avtomatsko mehanizacijo kratkih obdelovancev EM15 - Leto izdelave: 2006 Tehnične specifikacije - Delovna širina: največ 150 mm - Delovna širina: najmanj 25 mm - Delovna višina: največ 50 mm - Delovna višina: najmanj 15 mm - Število vreten: 3 - Moč zgornjega vretena: 22 kW - Moč spodnjega vretena: 11 kW - Hitrost vrtenja vretena: največ 7.000 min⁻¹ - Premer vretena: 40 mm - Dolžina mize: 2.000 mm - Največja hitrost podajanja: 24 m/min - Neprestano nastavljivo podajanje - Poseben motor za vsako vreteno - Kardansko gnano podajanje valjev - Podajanje iz zalogovnika - Motorni pomik višine skobljanja - Avtomatska mazalna črpalka - WEINIG čelni rezkar - WEINIG EM 15 - Skupna priključna moč: 45 kW