Mobilna enota za ekstrakcijo

Holzkraft RLA 210 PM Reinluftabsauganlage

Stanje: zelo dobro (rabljeno), Circular saw flat motor KATT 11 kW / 1450 rpm, flange diameter 200 mm, right-hand thread, second shaft end for hydraulic pump drive with 150 mm diameter pulley, tested and newly fitted with bearings. Dksdsh D Rt Ajpfx Afljg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 1.200 mm, največja višina reza: 130 mm, premer žaginega lista: 400 mm, širina reza pri vzporednem vodilu: 1.200 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, glavni premer žaginega lista: 400 mm, vrtljajska hitrost (min.): 3.500 obr/min, največja hitrost vrtenja: 4.500 obr/min, dolžina rezanja (maks.): 1.250 mm, With swiveling 400 mm saw blade Dkodswa A E Aspfx Aflsg With manual height and angle adjustment 130 mm cutting height Demo machine, year 2022

Stanje: rabljeno, Power connection: 480V, 4kW Filter surface area: 15.8 m² Nominal air flow: 3,200 m³/h Minimum air flow: 2,262 m³/h Dedpfxsvz U Sro Aflskg Extraction connection: Ø 200 mm Weight: approx. 550 kg Dimensions (LxWxH): 2,400 x 900 x 2,100 mm

Stanje: zelo dobro (rabljeno), 4 kW motor Dkodpfx Afeup Ulqolog Transport dimensions Height 310 cm Width 90 cm Length 180 cm

Stanje: novo, Vacomats are mobile dust extractors designed to remove large volumes of dust and chips in confined spaces. These clean air extraction units (negative pressure), intended for indoor installation, can be used for single- or multi-machine extraction with air volumes of up to 10,000 m³/h. Manufactured according to the latest EU standard EN 16770, they are specifically suitable for woodworking operations where increased safety requirements apply due to the risk of dust explosions. Suitable for dusts classified under explosion group St1. Filter cleaning on the Vacomat XPe models is performed entirely electro-mechanically via an efficient shaking motor, which starts automatically once all connected machines are switched off. Control is managed via potential-free contacts triggered by the woodworking machine. The control for motorized shaking is included in the delivery. Supplied without coils. Dsdpou T Dv Esfx Aflskg Features: - Motorized filter regeneration - Mobile design - Extraction side configurable to the right or left - Height reduction possible for transport ----- Technical Data ----- - Extraction nozzle diameter: 200 mm - Airflow: 2,495 m³/h - Rated airflow: 2,262 m³/h - Max. negative pressure: 2,000 Pa - Filter surface: 14.5 m² - Residual dust content: < 0.1 mg/m³ - Number of bags: 3 - Motor: 4.0 kW - Dimensions (LxWxH): 2,645 x 900 x 2,130 mm - Weight: 500 kg - Sound pressure level: 73 dB(A) - Dust class: M Includes: built-on control cabinet

Stanje: novo, Leto izdelave: 2025, Holzkraft Extraction System RLA 210 For wood dust and chips, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of suction connection (inlet): 200 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Djdjhk Dfropfx Aflokg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Max. sound pressure level: 72 dB(A) Air Volume Nominal air flow: 2262 m³/h Dust tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirement Maximum performance in this class Very quiet All models equipped with collision protector Applications Designed for commercial use Suitable for all woodworking machines with corresponding suction connection diameters High-Quality, Thoughtful Construction -Robust and compact housing made of galvanized steel sheet -Suction connection can be easily converted from left to right for flexible use -Large access openings for maintenance -Large, mobile chip containers with clamping bracket and chip collection bag -Dust extractor comes fully assembled for immediate operation -All models are mobile -RLA 210 model: Optimal chip distribution in the containers thanks to a large filter area Filter Description -Ultra-compact with maximum filter area -Filter material made of polyester fleece, aluminum-coated, washable and therefore highly durable -Filter standard antistatic, certified and approved according to category M-BIA -Filter resistance monitoring via differential pressure switch, adjustable with warning lamp on control panel -Fan mounted downstream of filter Equipment Details With innovative locking device for secure container positioning Location: Ex-stock 54634 Bitburg - Available immediately -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, obratovalne ure: 5 h, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 45 mm, največja debelina roba: 3 mm, moč rezkalne enote: 750 W, vrsta vhodnega toka: trifazni, kapaciteta rezervoarja: 1 l, Automatic edge banding machine with chain feed and jointing milling unit Dksdpfjwa Ag Tsx Aflsg Demo machine, year of manufacture 2022 Features: Touch ME "7" touchscreen control Quick-change glue pot kit Multifunctional end trimming unit Radius scraper unit Flat scraper unit LED interior lighting

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.000 mm, skupna višina: 2.070 mm, skupna dolžina: 1.800 mm, širina brušenja: 1.350 mm, moč: 11 kW (14,96 KM), dolžina brusnega traku: 2.150 mm, širina brusilnega traku: 1.370 mm, premer ekstrakcijske šobe: 200 mm, moč pogonskega motorja podajalnika: 800 W, vhodna napetost: 400 V, Slight signs of use from demonstration present. The LIBRA 45 is distinguished by its extensive standard equipment, a very robust construction (both the base frame and working units), sanding shoes with a larger contact surface, and modern control systems. - Motorized table height adjustment - Digital display for working height - Electronically controlled sanding belt oscillation with reduced compressed air consumption - Automatic star-delta start - Natural rubber feed belt with negative profile - Automatic belt centering - Support table with rollers at the infeed and outfeed of the feed belt - Large sanding roller diameter Ø 140 mm - Belt feed via geared motor with two speeds - Flexible steel pressure rail in front of the first unit - Rubber pressure rollers before and after each working unit - Pneumatic belt tensioning for each unit with decimal correction option for grit/belt thickness Equipment: - Working table height adjustment with electronic display for working height - Oscillation of sanding belts with electronic system Dsdpevxu E Hsfx Aflskg - Rubber-coated, grooved pressure roller at infeed 1st position with backflow lock (C.E.) - Star-delta start of main motors - Grooved calibration steel roller - Selector switch for positioning the sanding shoe from the control panel Extraction connection Extraction port diameter 2 x 200 mm Electrical data Height adjustment motor power 0.25 kW Feed motor power 0.8 kW Drive motor power 11 kW Connection voltage 400 V Mains frequency 50 Hz Sanding unit Sanding belt length 2150 mm Sanding belt width 1370 mm Max. sanding width 1350 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. height 4 mm Max. height 170 mm

Stanje: rabljeno, Sanding Drum (Rubber Air Drum) – Original Product by KED (Kurt Ehemann) -Type: G 15 x 20 -Includes: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 150 mm -Grinding length: 150 mm -Base body length: 200/210 mm -Mounting bore: 30 mm -Quantity: 2 units available -Price: per piece Available on request in other sizes: e.g. Diameter 40 mm, 60 mm, 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 250 mm, 300 mm e.g. Sanding length 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, 400 mm, 500 mm Also available as brush sanding bodies. Furthermore, we also supply general Ehemann spare parts. Dodsb A S Rajpfx Afljkg Prices for sanding drums can be found in the attached PDF file.