Stroj za robne trakove

HolzHer Sprint 1321

Stanje: rabljeno, Leto izdelave: 2004, Used machine Year of manufacture: 2004 Features and Technical Data: Edge feed for coil and strip material Jointing unit with 2 milling heads Cartridge glue application system 3-roller pressure section End trimming unit Radius milling unit Radius scraper unit Corner copying unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Max. edging height: 55 mm Min. edging strip length: 350 mm Pgodpfx Ajvymdqjgpsw Max. edging overhang per side: 3 mm Min. workpiece width: 60 mm Min. workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6480 x 1250 x 1690 mm Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2007, Območje rezanja: 3900 x 3100 mm Moč motorja: 11 kW Premer žaginega lista: 350 mm Obrati: 4070 1/min Hitrost podajanja: 0-70 m/min Največja odprtina vpenjalnih čeljusti: 72 mm Največji izhod žaginega lista: 77 mm s predrezovalnikom Lokacija: pri dobavitelju Pgjdpoxfbwrefx Agpow

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit Pgjdpfx Agoxfh Tmepew - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment (1 pc) Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Location: Nattheim

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, vrsta nastavitve višine: mehanski, vhodna napetost: 400 V, potrebna višina: 1.200 mm, Edge banding machine equipped with: - Trimmers - Edging tape magazine - Interchangeable hotmelt glue pot for EVA or PUR Pedjwy Ugxspfx Agpegw - Flush trimming - Corner rounders

Stanje: rabljeno, številka stroja/vozila: 008018, Tip pritrjene obrobe: tanka obroba, močna obroba, masiven les Lepilni sistem: EVA, PUR Spojno rezkanje: da Pjdpfx Agewv Dfcepjgw Multifunkcijska enota: da Maks. podajalna hitrost: 20 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 7 kos

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Pedpevvkfdofx Agpsgw Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Rabljeni robni lepilni stroj - OLIMPIC K 360 R - Letnik izdelave: 2022 - Na voljo od novembra 2025 Pgsdjxhc Evjpfx Agpsw - dodatne fotografije/video na voljo

Stanje: rabljeno, Leto izdelave: 2003, Used machine Year of manufacture: 2003 Equipment and Technical Data: - Control unit with LCD display - Swiveling control panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond joint cutters, both climb and counter-rotation Pgedpfxswka Nyj Agpsw Edge magazine 1903: - Support disc 820 mm, max. loading capacity 40 mm - Automatic feeding of roll and strip material Glue application system 1906: - Cartridge system with sensing nozzle - Automatic reloading - PUR adhesives can be used Pressure unit 1816: - With driven roller - Pneumatic control of pressing system End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Application-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness roll material: 3 mm Edge thickness strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance to workpiece support: 470 mm Support disc Ø for edge material: 800 mm End trimming knives for rolls up to: 3 mm Heating time: 3.5 min Joint cutter power: 2 x 2 kW End trim saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction connection jointing unit: 120 mm Extraction connection milling unit: 70 mm Extraction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Stanje: rabljeno, Holz Her STREAMER 1054 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with rotary switch for unit adjustment Pre-milling unit for jointing before gluing section Fully automatic edge magazine for both rolls and strip material GLU-JET cartridge glue application station with PU gluing Adhesive application via nozzle technology Workpiece height: 6-60 mm Automatic glue height adjustment Pgjdsxu E Nwopfx Agpew High-quality 3-roller pressure unit, first roller motorized Pneumatic end trimming unit for rolls and strips up to 6 mm edge thickness With pneumatic adjustment from 0-10° angle for trimming saws Pneumatic milling unit for flush milling (6 mm), radius milling, bevel milling (15°), pneumatically controlled from the operator panel Scraper unit for bevels and radii with 2 scraper holders, pneumatically engageable/disengageable Surface scraper unit for finishing Spraying system - PU The machine is WORKSHOP-REFURBISHED and in TOP CONDITION

Stanje: rabljeno, Leto izdelave: 2014, Used machine Year of manufacture: 2014 Equipment and technical data: - Control unit with 10.4" color touchscreen - Extendable workpiece support - Motorized, position-controlled pressure beam - Chain feed with feed speed of 12 m/min - Roller support plate, ball bearing-mounted, diameter 770 mm - 2-motor jointing milling unit / 2 x 1.1 kW - Edge feeder for coil and strip material, 0.4 - 10 mm (edge detection via infrared sensor) - Teflon-coated glue unit - Pre-melting unit for EVA adhesive - Exchangeable glue unit for EVA - Exchangeable glue unit for PUR - Motorized, position-controlled pressure unit Pedew Nadtepfx Agpsgw - 2-motor end trimming unit / 2 x 0.50 kW - 2-motor multifunction unit for radius, flush, and chamfer milling / 2 x 0.75 kW - Corner rounding unit - Radius scraper - Flat scraper - 2-motor polishing unit (buffing wheel) - Spray unit for release agent at the machine infeed side - Spray unit for cleaning agent before the polishing unit Availability: short-term Location: 65439 Flörsheim