Hladilni sistem

HOFFMANN HSF150 SE/K

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Prostorninska zmogljivost 300 l Dovodni tlak 18,5 bar Vsebina hladilne tekočine 2800 l Iodpfx Afjxxmm Ss Tjal Filtrirna površina 1,5 m² Skupna potrebna moč 45 kW Teža stroja pribl. 3,1 t Potrebni prostor pribl. 4,3 x 2,6 x 2,2 m

Leto izdelave: 2021, Stanje: novo, Type: Gas-fired with central recuperator Max. temperature: 1,300°C Max. furnace throughput: approx. 700 kg/h Clear door opening (W x H): 600 x 400 mm Number of burners: 6 Number of control zones: 3 Heating capacity: 720 kW Total electrical connected load: approx. 15 kVA PLC: Siemens S7 Iajdjg E S Inopfx Af Tol

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic Iasdpsul Efmjfx Af Tol measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Leto izdelave: 2024, Stanje: rabljeno, Grinding wheel arbor: HSK 50 E Diamond grinding wheel diameter: 50 - 250 mm Max. grinding wheel width: 70 mm Grinding wheel bore diameter: 20 mm Speed of diamond/CBN wheel spindle: steplessly adjustable 100 - 1000 rpm Grinding wheel radius: 0-30 mm Dressing wheel dimensions: 180 x 25 x 31.75 mm Rotational speed of dressing wheel: 200 - 2000 rpm Oscillation stroke of dressing wheel: 0-70 mm Dressing wheel motor power: 2.2 kW Approx. weight: 1400 kg Dimensions (L x W x H): 1850 x 2300 x 2100 mm Description: Suitable for dressing and profiling diamond and CBN grinding wheels. Accessories: Full enclosure, Isdelfil Sspfx Af Teal Reinforced grinding wheel motor 4 kW, Reinforced dressing wheel motor 2.2 kW, 2 machine lamps 12 V, Glass scale on X and Z linear axes, 2/3" camera system with 17" LCD monitor (microscope with 15-120× zoom), High-performance angle measuring device (0.05°), Diamond/CBN wheel spindle steplessly adjustable 100 - 1000 rpm, Dressing wheel speed steplessly adjustable 200 - 2000 rpm, Stepless oscillation speed, Automatic central lubrication, SIC manual dressing wheel.

Leto izdelave: 2012, Stanje: dober (rabljeno), Muratec MW120 GT naprodaj Rabljeno, v odličnem stanju. Ogled stroja je možen po dogovoru. Iajdpfx Aoifi D Tef Tel Dostava je odgovornost kupca, po potrebi pa lahko pomagamo pri pakiranju in nakladanju. Dobava: EXW Székesfehérvár

Stanje: rabljeno, Leto izdelave: 2007, Število obratov 8000 min-1 Teža 5500 kg Leto izdelave 2007 Krmiljenje Siemens 840D Mere (d/š/v) 3600 x 2800 x 2400 mm Iodpswm Rqaofx Af Tsal Pomik - X 1035 mm Pomik - Y 560 mm Pomik - Z 510 mm Na voljo več slik

Leto izdelave: 1994, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Weight: 3,700 kg Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Iajdpfx Afegyd T Ej Tsl Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 20403, Angbot 25170 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling diameter in steel ST 60: 50 mm - Spindle taper: MT 4 - Spindle stroke: 180 mm - Infinitely variable spindle speeds with intermediate gearbox: - Range 1: 60 – 210 rpm - Range 2: 210 – 765 rpm - Range 3: 120 – 420 rpm - Range 4: 420 – 1530 rpm - Throat depth: 330 mm - 3 automatic feed rates: 0.1 / 0.2 / 0.3 mm/rev - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance table to spindle: approx. 780 mm - Max. distance base plate (machined) to spindle: 1250 mm - Coolant system - Work light - Machine vice Isdjwncaispfx Af Teal - Assorted 10 pcs. HSS drills - Power supply: 400 V / 2.6 / 4 kW - Space requirement: approx. W 720 x H 2050 x D 1150 mm - Weight: approx. 350 kg

Stanje: rabljeno, Leto izdelave: 1992, hitrost vretena (min.): 7.500 obr/min, največja hitrost vretena: 24.000 obr/min, 4 motor-driven grinding spindles (liquid-cooled, with purge air / oil mist lubrication) including the REFU HF frequency converter, e.g., suitable for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Frequency Converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter, frequency inverter for powering motor spindles GMN tool spindle, motorized grinding spindle Iaedpfx Aol Tn Afof Tol The spindles are fully functional but are sold without warranty – year of manufacture approx. 1992. A batch of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries of the European Community.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Wheel diameter - max. 100 mm Wheel width 26 mm Module - max. 3 Module - min. 0.1 Control system Siemens 840 D SL Operating hours 9,598 h Total power requirement 45 kW Machine weight approx. 7 t Space requirement approx. 4x3x2.5 m Gleason 100S Gear Shaping Machine for manufacturing internal and external cylindrical gears and other regularly recurring rollable profiles and shapes on the cylindrical workpiece circumference, as well as for single-piece production of profiles. Technical specifications: Nominal workpiece diameter 100 mm Maximum rotating diameter 150 mm Nominal module of the machine approx. 3 mm (reference value depending on the respective machining task) Stroke spindle speed range 0 - 3,000 rpm Manual stroke position adjustment range 20 mm Iedpjv Ehbbsfx Af Teal Maximum gear width 26 mm Minimum rise height of hydrostatic skew guide 400 mm Minimum/maximum distance between tool and workpiece spindle -20/+180 mm Column tilt range (manual) -1/+11° Tool holder (manual clamping) HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight approx. 7,000 kg with robot cell