Navpična stružnica
HNK VTC-16/20R

Leto izdelave

2025

Stanje

Novo

Lokacija

Bad Oeynhausen Nemčija

Prikaži karto

Podatki o stroju

Opis stroja:: Navpična stružnica

Proizvajalec:: HNK

Model:: VTC-16/20R

Leto izdelave:: 2025

Stanje:: novo

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Weserstr. 228, 32547 Bad Oeynhausen, Deutschland

Klic

Tehnične podrobnosti

Višina struženja:: 1.600 mm

Premer struženja:: 2.000 mm

Podrobnosti ponudbe

ID ponudbe:: A20343870

Nazadnje posodobljeno:: dne 21.10.2025

Opis

CNC Vertical Turning Center
Model: VTC-16/20R with Fanuc 31i-B

Table diameter: Ø1,600 mm
Max. swing diameter: Ø 2,000 mm
Max. turning height: 1,600 mm
Table speed: max. 250 rpm
Table load capacity: 8,000 kg
Table indexing speed: 720 degrees/min
Gjdpfx Absxp Nb To Touk
Table indexing: 0.001°
X-axis (ram horizontal): -100 mm to 1,170 mm
Z-axis (ram vertical): 900 mm
Spindle speed: max. 2,000 rpm
Ram size: 240 mm x 240 mm
Milling spindle taper: ISO 50
Tool shank size: 40 mm x 40 mm
Crossrail (vertical travel): 250 mm x 3 steps (hydraulic)
Table drive motor: AC 37/45 kW (continuous / 30 min.)
Milling spindle drive power ISO 50: 15/18.5 kW (continuous / 30 min.)
CNC Control: Fanuc 31i-B
Display unit: 15-inch TFT LCD
Memory: 1 MB
Automatic tool changer: 24 positions (for 7 turning tools + 1 cover + 16 milling tools)
Standard tool holders: New 240 TCR-01 (2 units)
Splash guard: Table version (R-Type standard)
External coolant system: 3 bar (80 l/min)
Chip conveyor: Hinge type
Table bearing cooling unit
4-jaw independent manual chuck
Foundation anchor bolts / leveling pads
Maintenance tools and toolbox
Hydraulic unit
Work area lighting
Signal light: 3 colors (green, red, yellow)
Operating manuals (English): 1 CD with Fanuc documentation and 3 books with mechanical/electrical instructions
Power supply: 220 V, 60 Hz, 3 phase
Machine color: Manufacturer's standard

OPTIONAL ACCESSORIES (No. 1)
Turning tool holder: Type 240TCR, 4x included
Rigid tapping: 1x included

OPTIONAL ACCESSORIES (#2)
Automatic shut-off for N.C – on request
Turning tool holder type 240TCR – on request
Through-spindle coolant supply: 30 bar (pump pressure) – on request
Transformer 415 V, 50 Hz, 3 phase – on request
Linear scales X-, Z-axis (Fagor, Spain) – on request
Workpiece measuring device – on request
Tool measurement TS27R, Renishaw – on request

Other information:
INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING – are not included in the price
INSURANCE AND FREIGHT – are not included in the price

The image shows machine with pallet changer.
The offered machine does NOT have a pallet changer!

Errors in technical data excepted. The scope of accessories applies exclusively and as specified in the textual item description. There is expressly no entitlement to any additionally depicted accessories that are shown for demonstration purposes, etc.

The General Terms and Conditions of JS-Werkzeugmaschinen GmbH apply.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Dokumenti

20343870-01.pdf

Ponudnik

Registriran od: 2020

11 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 172 2... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

CNC stružno-rezkalni center DOOSAN DAEWOO PUMA V-1200M

Calerno

386 km

CNC stružno-rezkalni center
DOOSAN DAEWOOPUMA V-1200M

Klic

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, premer struženja: 1.600 mm, moč vretenovega motorja: 45 W, največja hitrost vretena: 1.500 obr/min, potovalna razdalja osi X: 1.200 mm, pomik po osi Z: 900 mm, hitro pomikanje X-os: 10.000 m/min, hitri pomik na osi Z: 10.000 m/min, CNC Vertical Lathe Daewoo Doosan PUMA V-1200M, year 2002, equipped with FANUC Series 18-T control, designed for machining large and heavy workpieces, ideal for applications in heavy-duty and industrial sectors. Main technical characteristics: Maximum turning and swing diameter: Ø 1,600 mm Maximum turning height: 1,200 mm Gsdpfx Ajwt S Rhjb Tsuk Maximum workpiece weight: 6,000 kg Chuck diameter: Ø 1,200 mm RAM axes: X (horizontal): 1,200 mm Z (vertical): 900 mm C axis: 360° rotation, minimum positioning: 0.001° Main spindle: Speed: 2 to 320 rpm (2 ranges) Power: 37/45 kW RAM driven spindle: ISO-50 taper Speed: 15 to 1,500 rpm RAM section: 240 x 240 mm Tool turret: 16 positions, for BT-50 type tools Max tool diameter: Ø 400 mm Max tool length: 450 mm Max tool weight: 50 kg Maximum total tool weight in magazine: 600 kg Feed rates: Rapid feeds X/Z axes: 10,000 mm/min Working feeds X/Z axes: 3,000 mm/min Included accessories: Chip conveyor Coolant tank with pumps Spindle line air conditioner Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration A robust and high-performance machine for vertical machining of large and high-precision parts.

Poglej podrobnosti

Mali oglas

CNC stružni in rezkalni center DOOSAN Puma 600L 3200

Sankt Leon-Rot

587 km

CNC stružni in rezkalni center
DOOSANPuma 600L 3200

Klic

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 2.900 h, Funkcionalnost: popolnoma funkcionalen, Popolna stroj, na primer za proizvodnjo artilerijskih ohišij po NATO standardu ali idealen za panoge, kot so naftna in plinska industrija, gradbeništvo, letalska in vesoljska industrija ter ladjedelništvo. Zelo dobro ohranjena in takoj na voljo Stroj je deloval zelo malo, stanje je praktično kot novo Gujdpfx Aoxz Hbujb Tjk 21-palčni CNC stružnica Doosan Puma 600L 3200 s "steady rest" (avtomatsko nastavljiva luneta) Letnik: 2018 Vključno z luneto Obratovalne ure stroja: 2.036 ur Tehnične specifikacije: Krmiljenje: Fanuc 32i-MA Maks. premer struženja: 900 mm Maks. dolžina struženja: 3.200 mm Velikost vpenjalne glave: 21 palcev Premer vretena: 152 mm Število orodnih mest v revolverju: 12 Hodi X/Z: 940 mm / 3.200 mm Za vse dodatne informacije nas kontaktirajte. Stroj je mogoče kadarkoli predstaviti na lokaciji.

Poglej podrobnosti

Mali oglas

Cilindrični brusilni stroj - Universal SCHAUDT E 450/1000

Nemčija

5.343 km

Cilindrični brusilni stroj - Universal
SCHAUDTE 450/1000

Klic

Stanje: rabljeno, Leto izdelave: 1980, Tehnične podrobnosti: Premer brušenja: 380 mm Dolžina brušenja: 1000 mm Gedpfxewy Ri No Ab Tjuk Višina konic: 180 mm Premer brusnega kola: 400 mm Največja teža obdelovanca med konicami: 250 kg Skupna potrebna moč: 10 kW Teža stroja cca.: 4,1 t Prostorska zahteva cca.: 3 x 2 x 1,6 m Z notranjo in površinsko brusilno napravo S fiksno in vrtljivo delovno glavo vretena Sistem za hlajenje *

Poglej podrobnosti

Mali oglas

CNC vozeča stebrna vrtalno-rezilna stroj, vozeča stebrna rezilna stroj z HEIDENHAIN iTNC 530, ležišč ANAYAK HVM-3800-P

Hessisch Lichtenau

682 km

CNC vozeča stebrna vrtalno-rezilna stroj, vozeča stebrna rezilna stroj z HEIDENHAIN iTNC 530, ležišč
ANAYAKHVM-3800-P

Klic

Stanje: rabljeno, CNC Travelling Column Boring and Milling Machine ANAYAK Type HVM-3800-P Bed Type Milling Machine, design similar to a plate boring machine with fixed table Machine No.: M-20021203 Year of Manufacture: 2002 "Refurbished 2025" The machine will be workshop-refurbished in 2025 and can then be inspected at our warehouse in 37235 Hessisch Lichtenau. Travels: X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size: 3800 x 1200 mm T-slots: 8 x 22 mm, spacing 130 mm Gedpfsxcgtgex Ab Tsuk Table load max. 25 t (stationary table – almost unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (pull stud DIN 69872-B) Spindle speed: 60–4000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power supply: 400 Volt, 50 Hz, 50 kVA - Automatic 30-position tool changer - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydromechanical tool clamping - Orthogonal milling head can be fully automatically swivelled in two 45° planes – B+C axis - Control: HEIDENHAIN iTNC 530, with electronic handwheel - Prepared for wireless measuring probe (probe and receiver not included) - Additional HF spindle 18,000 rpm – can be mounted - Free-standing control cabinet - Chip conveyor mounted between travelling column bed and machine table - 32,078 operating hours read - Coolant system - Freestanding hydraulic unit - Operating manual with circuit diagrams Machine footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (complete): approx. 33 t Good condition

Poglej podrobnosti

Mali oglas

Navpična stružnica Doerries VCE 2000/180 MC

Neuhausen auf den Fildern

515 km

Navpična stružnica
DoerriesVCE 2000/180 MC

Klic

Mali oglas

Stroj za rezkanje zobnikov Gleason-Pfauter PE300

Barßel

935 km

Stroj za rezkanje zobnikov
Gleason-PfauterPE300

40.000 €

Začetna cena brez DDV

Klic

Stanje: dober (rabljeno), Leto izdelave: 1987, obratovalne ure: 2.685 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 240 mm, dolžina pomika po osi Y: 200 mm, dolžina podajanja os Z: 400 mm, skupna dolžina: 5.235 mm, skupna višina: 3.045 mm, skupna širina: 3.990 mm, največja hitrost vretena: 640 obr/min, hitrost vretena (min.): 55 obr/min, skupna masa: 11.000 kg, Oprema: dokumentacija / priročnik, Gear hobbing machine Pfauter PE 300 Model: SK07E 20100 Control: Sinumerik System 3 Guedew Dcx Rspfx Ab Tok Fully functional machine, which was completely overhauled just a few years ago. Investments made: - Overhaul including milling head (2021): approx. €70,000 - All hydraulic hoses replaced (2021): approx. €3,500 - New oil mist separator (2021): approx. €5,000 A wide range of tools and clamping devices included, see photos and attachment.

Poglej podrobnosti

Mali oglas

Stroj za površinsko brušenje Rosa ER 10 1000x600 mm

Kaufungen

694 km

Stroj za površinsko brušenje
RosaER 10 1000x600 mm

Klic

Stanje: dober (rabljeno), Leto izdelave: 1990, 1 used surface grinding machine Manufacturer: Rosa Model: ER 10 Year of manufacture: 1990 Technical Data Travel: 1000 x 600 mm Magnetic chuck: 1000 x 600 mm Maximum grinding height: 400 mm Longitudinal feed speed: 2-30 m/min Cross feed speed, stepless: 0-3 m/min Grinding spindle speed: 1450 rpm Guodpfx Abouuik Ss Tjk Grinding wheel dimensions: 400 x 60 x 127 mm Grinding wheel motor power: 7.4 kW Dimensions (LxWxH): 3900 x 2050 x 2400 mm Weight: 6 t

Poglej podrobnosti

Mali oglas

VERTIKALNI OBDELOVALNI CENTER MAZAK VTC 760 C

Rochetoirin

745 km

VERTIKALNI OBDELOVALNI CENTER
MAZAKVTC 760 C

Klic

Mali oglas

Obdelovalni center - navpično DOOSAN DNM 400

Nemčija

650 km

Obdelovalni center - navpično
DOOSANDNM 400

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Travels (X, Y, Z) 742 x 435 x 510 mm Number of spindles, vertical drilling head / pcs Number of spindles, horizontal drilling head / pcs The DOOSAN DNM 400 is a vertical CNC machining center designed for precise milling operations in metalworking. It is particularly suitable for small to medium-sized workpieces and offers a robust combination of performance, accuracy, and reliability. All technical documentation for the machine is available and included. Including accessories. Gusdpfx Abewmxfle Tsk Control: HEIDENHAIN iTNC 530 Travel: X-axis: 742 mm Y-axis: 435 mm Z-axis: 510 mm Rapid traverse: X-axis: 36 m/min Y-axis: 36 m/min Z-axis: 30 m/min Maximum feed rate: 1~15,000 mm/min Ball screw (diameter × pitch): X-axis: 40 x P12 mm Y-axis: 40 x P12 mm Z-axis: 40 x P10 mm Accuracy: Positioning accuracy: ±0.005 mm over the full travel Repeatability: ±0.002 mm Table size: 920 x 435 mm Min./max. spindle nose to table: 150~660 mm Maximum table load: 600 kgf Table surface configuration: 4-125 x 15H8 Maximum workpiece height: 465 mm Machine weight: 5,000 kg

Poglej podrobnosti

Mali oglas

Notranji pehanje stroj Arthur Klink RISZ 10x1000x400

Hövelhof

780 km

Notranji pehanje stroj
Arthur KlinkRISZ 10x1000x400

Klic

Leto izdelave: 1993, Stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Gjdpfx Aocc D Ddob Teuk Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.

Poglej podrobnosti

Oglašujte tukaj