Dvojni tiskarski stroj

HILGELAND CH 4 C

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 3.300 mm, pomik po osi Z: 1.500 mm, Manufacturer: SORALUCE Model: FS 8000 Control: Heidenhain iTNC 530 Year of manufacture: 2006 ATC Chain with 40 positions Maximum tool size: Ø 125 x 400 mm Machine prepared for rotary table Chip conveyor Central lubrication Travel with vertical head rotated: 3,300 mm Iiodpfx Asxc Emxjl Nja Specifications Metric / US Standard X-axis: 8,000 mm Y-axis: 2,800 mm Z-axis: 1,500 mm Spindle power: 30 kW Spindle speed: 5,000 rpm Tool holder: 50 ISO/BT/MK X-axis feed rate: 15,000 mm/min Y-axis feed rate: 15,000 mm/min Z-axis feed rate: 15,000 mm/min Milling head auto-index: 2.5 x 2.5° Dimensions (approximate) Length: 17,500 mm Width: 4,050 mm Height: 5,020 mm Weight: 38,400 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or contractual terms. We recommend verifying all critical details independently.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Centre height: 210 mm Swing over bed: 420 mm Swing in bed gap: 580 mm Swing over cross slide: 250 mm Distance between centres: 1000 mm Iodpsx Rt Eusfx Al Neia Spindle nose: D1-6 Spindle speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Longitudinal feed: 0.05 – 1.7 mm/rev (17 steps) Cross feed: 0.025 – 0.85 mm/rev (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth threads: 2 – 72 TPI; (45 degrees) Module threads: 0.3 – 3.5 MP, (18 steps) Tailstock quill diameter: D50 mm Tailstock quill stroke: 120 mm Tailstock taper: MK4 Power: 3.3 kW/400 V Machine weight: 1270 kg Dimensions (L x W x H): 1940 x 850 x 1320 mm Equipment: - 3-axis digital readout system - Fixed steady rest - Travelling steady rest - 3-jaw chuck fitted, D200 mm - 4-jaw chuck D250 mm - Drill chuck safety guard with safety switch - Rear splash guard - Tailstock - Coolant system - Chip tray - Toolpost guard - Longitudinal stop - Halogen work lamp - Emergency stop button - CE marking - Machine documentation The machine is a brand-new exhibition model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Z dvema obdelovalnima moduloma, X-os: -50 do 725 mm, Y-os: -200 do 300/ -250 do 250 mm, hitro pomikanje X-, Y-, Z-osi: 18/12/30 m/min, krmiljenje: Siemens Sinumerik, temperaturno območje: 5-40°C, vrsta toka/frekvenca: 3 PEN/50Hz, nazivna napetost: AC 400V, krmilna napetost: DC 24V, pomožna napetost: AC 230V, priključna moč: 102 kVA, nazivni tok: 148A, nazivni tok (hiter): 148A, varovalka (počasna): 160A, dolžina: 8000 mm, širina: 3000 mm, višina: 4000 mm, teža: cca 17 t, stanje delovnih ur: cca 80.000 h. Stroj je popolnoma funkcionalen, kroglično vreteno (obtočno vreteno) Z-osi je bilo obnovljeno leta 2024, redno vzdrževan. Z dokumentacijo, razdelilno omaro, hidravličnim agregatom, filtrskimi elementi in transporterjem za ostružke. Ogled na mestu je možen. Iedpswbuyzsfx Al Nsia

Stanje: rabljeno, SPE Renergi nizkotemperaturni sušilnik. Renergi sušilnik se uporablja za sušenje žagovine in drugih materialov za proizvodnjo biogoriv. Sušilnik lahko suši žagovino, lubje ali lesne sekance, zmanjšujoč vsebnost vlage približno s 50 % na približno 10 %. Ta nizkotemperaturni sušilnik uporablja toplo (ali vročo) vodo s priporočeno temperaturo od 65 °C naprej. Najvišja temperatura vode: 110 °C. Varnost napajanja: Sušilnik sme biti priključen izključno na trifazno omrežje 3x400 V AC (630 A), 50/60 Hz, z ločenim zaščitnim ozemljitvenim vodnikom. Podatki o napajanju: • Napetost: 400 V AC, trifazno • Priporočene varovalke: največ 3x630 A • Tipična poraba energije: 200 kW Dimenzije sušilnika so cca 17,4 x 5,7 m, višina 10,7 m. Potrebna talna površina znaša približno 21,4 x 8,0 m. Višina stropa naj bo vsaj 15 m (oziroma 4 m nad vrhom dovoda materiala). Dovod zraka: Za obratovanje naprave je potreben dovod vsaj 24 kg/s svežega zraka (kar ustreza 20 nm3/s ali 72.000 nm3/h). Pretok zraka: največ 200 l/min Tlak zraka: najmanj 4,5 bar, priporočljivo 6,0–8,0 bar Vodni dovod: topla voda, pretok 32 dm3/s Tlak vode: najmanj 1,5 bar, največ 6,0 bar Obratovalno temperaturno območje: • Temperatura dovedenega zraka: -20 °C do +50 °C • Relativna vlažnost: 0 % do 60 % Surovina/material: • Relativna vlažnost: 45–55 % (teža) • Zahtevana vlažnost po sušenju: 8–15 % Isdpowp Rqfofx Al Njia Zmogljivost: • Dvo-celični sušilnik širine 4 m lahko praviloma obdela 2.400 kg materiala z vsebnostjo vlage 55 % v vsaki seriji • Sušilnik lahko posuši 6.000 kg surovine (od 55 % na 10 % vode) v eni uri SRE sušilnik je izdelan skladno z evropskimi direktivami in ustreza zahtevam: • Direktiva o strojih 2006/42/ES • LVD 2006/95/ES • EMC 2004/108/ES Sušilnik se nahaja v občini Straupe, okrožje Cēsis, LV-4152, Latvija. Ogled je možen ob delavnikih od 8.00 do 17.00, predhodno po dogovoru. Sušilnik je že demontiran. Na voljo so vsi električni shematski prikazi, navodila za uporabo in servisna dokumentacija. Po dogovoru zagotovimo kontakt z uporabnikom tovrstnega sušilnika za strokovno svetovanje. Cena: 20.000,00 EUR (DDV ni vključen)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 730 mm, pomik osi Y: 730 mm, pomik po osi Z: 850 mm, dolžina obdelovanca (maks.): 1.000 mm, teža obdelovanca (maks.): 500 kg, število mest v zalogovniku orodij: 120, proizvajalec krmilnikov: FANUC, skupna višina: 3.138 mm, skupna dolžina: 2.725 mm, skupna širina: 4.610 mm, skupna masa: 12.900 kg, model krmilnika: FS-31IA (MAPPS III), hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 50 m/min, največja hitrost vretena: 14.000 obr/min, dolžina orodja: 500 mm, premer obdelovanca (maks.): 800 mm, CNC Control: FS-31IA (MAPPS III) Axes Travel X-axis mm: 730 Travel Y-axis mm: 730 Travel Z-axis mm: 850 Rapid traverse m/min: 50 B-axis indexing degrees: 360º (1º) Distance spindle nose to table surface mm: 100 – 830 Axis acceleration m/s²: 9.8 (X), 10.8 (Y), 6.9 (Z) Work Table Number of pallets: 2 Pallet dimensions mm: 500 x 500 Max. workpiece size (D x H) mm: 800 x 1000 Max. workpiece weight kg: 500 Pallet change time sec: 7 Spindle Max. spindle speed rpm: 14,000 Spindle drive power kW: 22/18.5 Tool holder: No.40 Spindle torque Nm: 220 Tool System Tool mounting: BT-40 Number of tools in magazine: 120 With free adjacent positions mm: 140 With occupied adjacent positions mm: 70 Max. tool length mm: 500 Max. tool weight kg: 12 Tool-to-tool time s: 0.9 Chip-to-chip time sec: 3.3 Equipment Chip conveyor Work area light CE conformity Coolant gun TOOL LIFE MANAGEMENT Cooling Tank capacity liters: 680 Isdpfx Alsvw Sc Ts Nsia Machine Run Time: Total power requirement kVA: 49 Base machine: Dimensions / Weight Length mm: 2,725 Width mm: 4,610 Height mm: 3,138 Weight kg: 12,900

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m Iiedpfecubatsx Al Nsa - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available

Stanje: rabljeno, Leto izdelave: 1994, Swing diameter: 570 mm Turning length: 2000 mm Control: Sinumerik 805 Siemens Max. swing diameter over cross slide: 365 mm Main spindle speeds: 3–2,500 rpm Main spindle drive power: 15/19 kW Spindle bore: 62 mm Spindle nose: DIN 55027 No.8 Tailstock quill taper: MK 5 Quill stroke: 190 mm Quill diameter: 80 mm Feed range – longitudinal and cross: 0.01–50 mm/rev Total power requirement: 50 KVA Machine weight approx.: 5 t Space requirements approx.: m Includes Forkardt chuck F315 Includes 6 pcs. Multifix tool holders Includes 1 pc. closed steady rest Includes 1 pc. open steady rest Iiodpfx Alou Sbkge Nsa

Leto izdelave: 1992, stanje: rabljeno, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece infeed and IONIC measurement control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992, No. 7924 --- Grinding wheel dimensions (each): 600 x 150 x 75 mm (H) Workpiece data: Grinding height approx. 1.5 – 50 mm Grinding width approx. 20 – 120 mm Vertical quill adjustment, each approx. 150 mm Infeed increment of grinding wheels via CNC: 0.0001 mm Workpiece transport device, continuously adjustable feed: 40 – 235 mm/sec Grinding wheel speed (each, 30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total drive power approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Ijdpfx Ast Hw Nael Neia Accessories / Special Features • SIEMENS CNC control SINUMERIK 810 G with display for 4 axes (top and bottom infeed, dresser, and workpiece rotation), direct input of all grinding parameters, and • IONIC measurement control no. 17 A with 2 measuring probes for scanning the workpieces after the grinding cycle, triggers automatic infeed corrections for the grinding wheels; real-time measurement data on monitor for statistics, workpiece counting, etc. • Digital display of current (amperage) of the drive motors and grinding wheel speed • Gantry construction for increased stability and improved grinding accuracy • Rotary workpiece transport with continuously variable speed control as 4th axis • Position control system for monitoring the height position of the lower grinding wheel • 2 adjustable workpiece hold-downs each at the infeed and outfeed, with height monitoring, simple raw part stacking mechanism, finished parts removal via conveyor belt • Half-inclined, side-mounted grinding wheel dressing device with preprogrammable dressing cycles, integrated as CNC axis in the control system with safety shut-off • Large separate electrical cabinet, automatic central lubrication, high-performance pneumatic system • Large PROMATEC (F) coolant system with filtration unit and magnetic separator • Various grinding wheels, flanges, various table segments, transport discs, large dust extraction system, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series, such as punched parts, piston rings, hydraulic components, etc. Condition: good to very good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This offers a very rare opportunity in terms of both condition and price. If you require another grinding machine, especially from the manufacturer DISKUS, please send us your inquiry.

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard Iiodoh Hvk Aepfx Al Noa - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Stanje: dober (rabljeno), Leto izdelave: 1970, For sale: Hilgeland forging machine, model CH5AL The machine is in perfect technical condition. Machine weight: approx. 20 tons. The forging machine comes with extensive tooling. Loading provided. Max diameter of normalized bolt: 16 mm. Iedpfsu Szucex Al Njia Max length: 200 mm.