Stiskalnica za lepilo

Hildebrand 6,1m

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Preša za lepljenje Hildebrand 6,1 m Knodpfxov Nxdue Ahvjd Leto proizvodnje: 1999 Tehnično stanje: zelo dobro

Leto izdelave: 1999, Stanje: rabljeno, The DSG 200 vertical sawmill is the ideal choice for woodworking shops specializing in furniture and wooden flooring production, offering high efficiency and reliable performance in daily operations. The used Wintersteiger mini band saw for wood is a very good investment—its major advantage over standard machines of this type is its compact footprint, while still excelling in material processing. It is designed for splitting individual elements and sizing them to the required dimensions. Operation of this machine is not particularly complicated and can be mastered quickly. The main advantage of our sawmill is its comprehensive equipment, most notably the saw blade lubrication system, controlled from the panel, which enables precise cutting of wet material. It features independent upper roller height adjustment for quicker cutting height changes. A pneumatic feed pusher supports material feed. TECHNICAL DATA: - Total power: 27.3 kW - Air Jet system motor: 2.3 kW Ksdpfxstvm Hds Ahvsnd - Siemens control panel - Feed rate: up to 2 m/min - Saw frame stroke: 210 mm - 400 strokes per minute - Cutting height, steplessly adjustable on our frame: 45–250 mm - Maximum achievable cutting height: 400 mm - Cutting width with lateral pressure: 80–205 mm - Minimum block length: 250 mm - Lamella thickness from 1.5 mm (depending on wood type and cutting height) - Saw kerf: 0.9–1.1 mm depending on cutting height - Length: approx. 5000 mm - Width: approx. 1300 mm - Height: approx. 2600 mm - Weight: 5000 kg Pneumatic feed pusher included Supplied with the machine: - complete large saw blade frame - small saw blade frame - frame pins - frame tensioning wedges - saw blade spacers - wet-cutting saw blades - dry-cutting saw blades - set of upper transport rollers - 4 lower transport rollers - complete set of slides - frame yokes - pocket cutting guides - loading magazines - DTR documentation - electrical diagram

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Preša za lepljenje Hildebrand 6,1 m Leto proizvodnje: 1999 Kedpfx Ajv Nxdzshvend Tehnično stanje: zelo dobro

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Pinheiro SFM1-900 Kodpfjtwrqbox Ahvond - Wheel diameter: 900 mm - Motor: 11 kW - Feed wheel height: 24 cm - Band length: 620 to 645 cm

Stanje: dober (rabljeno), Leto izdelave: 2003, Automatic Hydraulic Gluing Press Kallesoe Type LV 7821 This press is used for gluing wooden elements, such as panels, with maximum dimensions of 7800 mm x 2100 mm. The gluing process is accelerated by warm water supplied to the press bed, which is kept in continuous circulation (it can be supplied from central heating or heated by built-in electric heaters on the press). Press heating power: 72 kW Maximum press output: up to 2000 m² / 7.5 hours Glue applicator with feed system for Kallesoe Press Type KL40 – designed for automatic glue application to each lamella and direct transfer to the LV7821 press. Kedpfxerqzgko Ahvond

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vertical double-sided wood press by C.O.P.E. Brand. Knedpfx Aoudy A Njhved Two work areas measuring 620x110 cm each.

Leto izdelave: 2016, Stanje: delavnici obnovljeno (rabljeno), Unit with 2 hydraulic pressing shoes from above for pressing glued timber lamellae in the mechanical press without any offset. (Instead of using a large hammer or heavy weights on the crane hook.) Drive: SEW geared motor and friction wheel, 1.1 kW Kedpfx Aed Dcmqshvond Hydraulic unit: 5.5 kW Oil tank capacity: 160 liters Pressure: 40 / 250 bar The machine was completely overhauled in 2012 and equipped with a new control cabinet and new electrical installation. As the customer did not pay the installments, we repossessed the machine about 1.5 years later. The machine was used intermittently for a maximum of 1 year.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, HYDRAULIC CLAMP FOR EDGE GLUING OF WOODEN ELEMENTS HSKG Category: VI – Hydraulic presses for gluing wooden elements The HSKG device is used for edge gluing wooden cut elements under high pressure from hydraulic cylinders. The clamping force per cylinder ranges from 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is performed in a stack within the loading area dimensions. Stack formation is achieved by hydraulic pressing between movable vertical beams and the vertical slats of the cross cylinders. Both elements of the stack forming system are equipped with wooden or metal inserts matching the stack profile of the slats. Edge gluing wooden elements improves frame quality, reduces machining costs, and minimizes wood waste. Technical and operational data (standard HSKG model – 6m) Number of loading bays pcs 4 Dimensions of a single loading bay - Loading height mm 1140 - Slat length in each bay mm 1530 Maximum slat width mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electrical supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of cylinders per bay: - Ø 50x100 – 3 pcs. - Ø 80x100 – 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Machine weight kg 4800 Ksdpfjtrl R Aex Ahvjnd On request, we also manufacture custom control configurations for the pressing cylinders according to the anticipated length of the glued elements, as well as different bay lengths and quantities per press set, and a maximum working width up to 220 mm with increased pressing force.

Stanje: novo, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, dvostranski, Line for longitudinal jointing with two milling machines. The press is 6000 mm long. The machine is new and has never been used. All corresponding tools are included with the machine. Ksdpfewptnmjx Ahvond

Stanje: dober (rabljeno), Product line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robot BACCI FC 8 The automatic copy shaping and sanding machine performs milling and sanding operations on chair, table, armchair, sofa, bed, furniture, and frame components, delivering the best finish and highest performance. Knjdpfx Aot Tw S Ujhvod Maximum working length: 2700 mm Maximum working height: 180 mm Maximum working width: 500 mm Maximum working width with rounded end: 350 mm Maximum worktable speed: 15 m/min Maximum table return speed: 50–100 m/min BACCI DOUBLE JET DOUBLE-JET is a dual machining centre with 6+6 interpolated CNC axes, equipped with a hopper conveyor system for automatic loading and unloading of parts.