Hidravlična stiskalnica

Hidrogarne/Garnet MV-800/NC SINCRO

We are offering a newly-built version of the machine shown here. The machine was commissioned in 2020 and can be inspected at the customer's site.

Technical Data:
Pressing force (T): 800
Opening force (T): 80
Motor power (kW): 55/75 + 55/75
Ram stroke: 1000 mm
Rapid approach speed (mm/s): 110
Working speed (mm/s): 6
Return speed (mm/s): 180
Guide column diameter (mm): 250
Maximum pressure (bar): 250
Usable table area (mm): 3,500 x 2,000
Lower table displacement (mm): 2,000
Distance between columns (mm): 2,000
Open height (mm): 1,500
Total width (front) (mm): 3,800
Total width (side) (mm): 4,500
Overall height (mm): 6,400
Weight (kg): 134,600

The MV-800E/NC-SINCRO press is specially designed for the setup and testing of dies, molds, and punches.

The four columns with 250 mm diameter, made from C45E steel, are manufactured specifically to withstand high stress.

It features an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability.

The press complies with all essential safety and health requirements pursuant to CE standards.
Ksdpfx Afjwlrv Us Nsll

STRUCTURE AND TABLE
• A frame capable of withstanding 600 T of concentrated force on 1/3 of its surface.
• Lower table with T-slots.
• Upper table with T-slots.
• Usable table area: 3,000 x 2,000 mm.

CYLINDER AND HYDRAULIC UNIT
• Two double-acting hydraulic cylinders, each with 400 T capacity.
• Single-stage hydraulic power unit with automatic shutoff of rapid approach speed and independent operation. Equipped with a decompression system and proportional pressure pre-fill valves. Digital potentiometers on the upper table control movement; an electronic synchro system compensates for off-center or unbalanced forces.
• The press features a lateral pressure switch for optimal job-specific pressure adjustment.
• Glycerine manometer with tonnage display.

ELECTRICAL INSTALLATION AND SAFETY
• Electrical installation for operation with 1 or 2 speeds for the main cylinder feed.
• The press features both manual and automatic cycles (selectable via test mode switch):
• The manual cycle allows all press movements to be performed step-by-step at low speed.
• The automatic cycle enables the press to execute a full production cycle.
• Electrical safety system for the fall protection of the upper table.
• Lower table with hydraulic withdrawal and physical stops.
• The machine is equipped with a control panel featuring a touchscreen display for entering operating and calibration parameters.
• Two 1,000 mm optical safety barriers (Class IV) are installed at the front and rear.
• All Siemens electrical components are IP55-rated and manufactured according to current CE directives and regulations.
• Electrical and hydraulic functions are redundant and self-monitored. Includes an additional safety block and self-checking devices for functionality and safety. Includes testing and certification of proper functionality and the safety distance of the light curtains.
• Safety is further ensured by a laser and Class IV light curtain area protection system.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.