Hidravlična stiskalnica

Hidrobrasil 50 Tonnen Doppelständerpresse

If the press does not exactly meet your requirements, please request a customized quotation with just one click:
Contact us for a tailored offer.
Hidrobrasil manufactures presses precisely according to your specifications—at surprisingly competitive prices!

####

50 T Top Ram Heated Press, double-column design, suitable for continuous operation, with the following basic specifications:

- Single heating level
- Idle speed up to 10 mm/sec (adjustable via rotary control)
- Opening speed up to 40 mm/sec
- Pressing speed starting at 8 mm/sec
- Table/heating plate size: 522 mm deep x 522 mm wide
- Ram/heating plate size: 498 mm deep x 498 mm wide
- 2 electrically heated plates, up to 200°C
- Oil temperature monitoring
- Hydraulic system with recirculating oil cooling
- Pressure holding valve: 0 to 3600 sec
- Pressure adjustment from 8 T to 50 T (50 T = 300 bar)
- Stroke limitation selectable via pressure or position
- Two-hand control, adjustable or fixed mounted
- Machine body double-coated
- Signal light: Red = Alarm, Yellow = Heating phase, Green = Ready
- Heating plates with electric heating rods, up to max. 200°C
- Setup, commissioning, and operator training available at extra charge

Laedpfxotwv S Ne Ah Djh
### Technical Data

## Construction
- Press type: Double-column press

## Thermally Neutral
- Temperature range: 80–120°C

## Operating Side
- Number of operator sides: 1

## Forces
- Max. pressing force: 500 kN
- Max. free opening force: 20 kN
- Pressure build-up time: Max. 3 sec (closed tool steel on steel)

## Dimensions
- Max. opening width: 600 mm
- Stroke and min. opening: 300/300 mm
- Table height above floor with heating plate: 900 mm
- Overall height above floor: approx. 2,500 mm
- Minimum hall height: 3,500 mm
- Parallel deviation at 20°C: +/- 0.1 mm
- Deflection: < 0.2 mm/m (determined at max. closing force with 70% loading)
- Total weight (without operating fluids): approx. 2.9 t
- Accessories: 2 heating plates (522 × 522 mm and 498 × 498 mm, max. heating power)
- Heating plates equipped with temperature sensors: up to 200°C

## Speeds
- Rapid close: 10 mm/sec
- Max. pressing speed: 8 mm/sec

## Sound Pressure
- Sound pressure level measured at 1.5 m height at the control panel (DIN 45635 T16 KL3): max. 78 dB(A)

## Hydraulics
- Number of press cylinders: 1
- Max. operating pressure: 250 bar
- Pressure build-up time: Max. 3 sec
- Pressure accuracy during pressing stroke: +/- 5 bar
- Main pump: BOSCHREXROTH gear pump, approx. 26 L/min
- Oil volume: approx. 130 liters (HLP 46 MW)
- Ambient temperature: max. 40°C
- Oil temperature: max. 55°C
- Feed temperature: not specified
- Automatic pressure readjustment for 5% pressure loss
- Pressure holding for up to 3600 sec

## Electrical
- Main power supply: 400 V AC
- Control voltage: 24 V DC
- Frequency: 50 Hz
- Hydraulic main motor connection: 7.5 kW
- Total connected load (excluding heating plates): approx. 10 kW

Description of the Heated Press:

The Hidrobrasil heated press with a pressing force of 50 tons and a table size of 600x600 mm is specifically designed for industrial applications. This is a double-column oil-hydraulic press, equipped with a sliding table mounted on spring-loaded rollers. The press is highly suitable for a variety of pressing processes, providing precise and reliable operation.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.