Hidravlična stiskalnica

hidrobrasil 17 Tonnen Einständerpresse

Here are the technical specifications of the offered machine:
If this press does not exactly match your requirements, please request an individual offer tailored to your needs with just one click:

Contact us for a customized quotation.

HIDROBRASIL manufactures presses exactly according to your specifications at surprisingly affordable prices!

Technical Data & Information:

Hydraulic 17-ton C-frame Press

C-frame press with 17-ton capacity, suitable for continuous operation, with these basic specifications:

a) Travel speed: 10 mm/s downward
b) Opening speed: up to 25 mm/s
c) Initial pressing speed: 10 mm/s
d) Table size: 400 x 400 mm
e) Ram size: 200 x 200 mm, with T-slots and central cylinder clamping
f) Overall dimensions approx.: 1150 x 800 x 1750 mm
g) Oil temperature display on the oil tank
h) Adjustable pressing force from 5 to 17 tons (set via rotary knob)
Knsdpfogrki Sjx Ah Dec
i) Manual lever operation with two speeds
j) Machine frame powder-coated or double-painted
k) Electrical cabinet cable entry from above, with 3000 mm cable and 16 A plug
l) Installation, commissioning, and training available at additional cost

Press Type C-frame press
Thermal neutral zone 80 – 120 °C
Number of operator sides 1 side

Forces
Pressing force max. (at 250 bar): 170 kN
Free return force max.: 10 kN
Pressure build-up time (closed die, steel on steel): Max. 2 sec

Dimensions
Max. opening width: 250 mm
Stroke and min. opening: 100 mm
Table height above floor: 850 mm
Height above floor (overall): ca. 2200 mm
Minimum hall height: 2500 mm
Parallelism deviation at 20°C: +/- 0.1 mm

Deflection
Measured at max. closing force with 70% utilization: ≤ 0.3 mm/m

Weight
Total weight of press (without operating fluids): approx. 1 ton

Speeds
Fast closing: 10 mm/s
Pressing speed: 10 – 0 mm/s

Sound Level
Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 78 dB(A)

Hydraulics
Number of press cylinders: 1 pc
Operating pressure max.: 250 bar
Pressure build-up time (press): 2 sec
Pressure accuracy during pressing stroke: +/- 5 bar

Main Pump
Gear pump approx.: 6 L/min
Oil volume: Approx. HLP 46 MW 100 liters
Ambient temperature max.: 40°C
Oil temperature max.: 55°C
Preheat temperature: (not specified)

Electrics
Main supply: 400 V AC
Control voltage (hydraulic pump): 24 V DC
Frequency: 50 Hz
Hydraulic main motor connection: 2.2 kW
Total power input: Approx. 3 kW

Design
The press is designed as an oil-hydraulic C-frame press. Hydraulics and tank are located at the top or on the press itself.

Hydraulic Unit
The hydraulic system is mounted above the press.

Safety Features
The press meets the applicable safety regulations (UVV) as well as current EU standards and directives for the described scope of delivery, each in their latest versions.

Electrics / Controls
The control cabinet, with control, power, and safety components, is mounted on the right side of the press.
Operation is via hand lever control.

Control Cabinet Equipment
Protection class: IP 54
Reserve space: approx. 20%
Cooling: none
Internal lighting: none
Mode selector switch lockable: Yes

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.