Stroj za krajšanje in brušenje dolžine LY300

Herzog LY300

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, skupna širina: 360 mm, skupna dolžina: 820 mm, skupna višina: 500 mm, vrsta vhodnega toka: Klimatska naprava, premer obdelovanca (maks.): 25 mm, skupna masa: 92 kg, vhodna napetost: 400 V, This LY300 cut-off and length grinding machine is pre-owned, but has only been used sporadically. The condition is very good, with only minor paintwork damage and a scratched machine cover indicating its age. From a safety perspective, the machine is equipped with a cover switch that automatically shuts off the machine when the cover is opened. A restart interlock prevents unintentional startup. The workpiece clamp for processing short workpieces is included with this machine. We can offer additional consumables such as cut-off wheels and cup wheels. Application: Rod-shaped workpieces can be cut to length and face-ground to size in a single operation. Ideal for manufacturing ejector pins. The machine is equipped with two parallel grinding spindles: one for cutting and one for precision face grinding to final dimension. The desired workpiece length is set on the scale to an accuracy of 1/100 mm. Workpiece length without using the clamp: 54–300 mm Workpiece diameter: Ø 1–25 mm Workpiece length with clamp (included in the accessories): 12.5–60 mm Workpiece diameter: Ø 1–10 mm Ejector pins with cylindrical head: max. Ø 6 Max. workpiece stock before processing: 195 mm Length tolerance: ±0.0 mm Squareness: ±0.01 mm Weight: 92 kg Dimensions without scale (W×D×H): 430×360×500 mm Dimensions with scale (W×D×H): 820×360×500 mm Height with open cover: 950 mm Resin-bonded cut-off wheel: SGA60P6BR1, Ø180×1×Ø31.75 mm Cup wheel: PA46, Ø100×50×10×Ø20 mm Location: Austria / Vienna Including the following accessories: • 1 pc. cut-off wheel SGA60P6BR1 with flange, mounted • 1 pc. cup wheel PA46 with flange, mounted • 1 pc. dressing diamond, mounted • 2 pcs. Y face spanner wrenches Fpedpfsxwp A Hex Ahmjh • 1 pc. pin spanner 6 mm • 1 pc. scale 300 mm • 1 pc. micrometer screw with scale sleeve • 1 pc. lever • 1 pc. operating manual, German Operating procedure: Open prism clamp: Move lever to the right in the middle and insert workpiece Close prism clamp: Move lever to the left Cutting: Move lever up left Face grinding: Move lever down left Open prism clamp: Move lever to the middle and to the right: remove finished workpiece The grinding wheel can be adjusted and dressed at any time without altering the set dimension.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 6 meseci, skupna širina: 360 mm, skupna dolžina: 1.020 mm, skupna višina: 500 mm, vrsta vhodnega toka: Klimatska naprava, premer obdelovanca (maks.): 25 mm, skupna masa: 92 kg, vhodna napetost: 400 V, Clamping, separating, and face grinding in one motion The machine features two parallel-operating grinding spindles: one for cutting off and one for precision face grinding to final dimension. The desired workpiece length is set precisely to 0.01 mm on the scale. Fpodpfx Ahsid Iymemjh Opening the prism clamp: Move the center lever to the right and insert the workpiece Closing the prism clamp: Move the lever to the left Cutting: Move left lever upward Finishing: Move left lever downward Opening the prism clamp: Move the lever to the center and right; remove finished workpiece. The grinding wheel can be adjusted and dressed at any time without losing the set dimension. Version equipped with motor protection, cover switch, and restart protection Operation without chuck hand: The machine is supplied with two stop rulers (300 & 600 mm): Max. finished workpiece length: 300 mm / 600 mm Min. finished workpiece length: 54 mm Workpiece diameter: Ø1-25 mm Operation with chuck hand (not included in accessories): Max. finished workpiece length: 60 mm Min. finished workpiece length: 12.5 mm Workpiece diameter: Ø1-10 mm Ejector with cylindrical head: max. size 6 Max. pre-machining workpiece overlength: 195 mm Length tolerance: +/-0.01 mm Squareness tolerance: +/-0.01 mm Weight: 92 kg Dimensions without ruler (WxDxH): 430x360x500 mm Dimensions with ruler (WxDxH): 1020x360x500 mm Height with open cover: 950 mm Cut-off wheel, non-woven: SGA60P6BR1, Ø180x1xØ31.75 mm Cup wheel: PA46, Ø100x50x10xØ20 mm Location: Austria / Vienna Condition: New, stock machine, 6 months warranty. Including the following accessories: • 1 pc. cut-off wheel SGA60P6BR1 with flange, pre-installed • 1 pc. cup wheel PA46 with flange, pre-installed • 1 pc. dressing diamond, pre-installed • 1 pc. belt, pre-installed • 2 pcs. Y-face spanner wrenches • 1 pc. each Allen key 3 mm, 5 mm, 3/16'' • 1 pc. pin wrench 6 mm • 1 pc. ruler 300 mm • 1 pc. ruler 600 mm • 1 pc. micrometer screw with scale sleeve • 1 pc. cleaning brush • 1 pc. lever • 1 pc. operating manual, German • 1 pc. wooden transport box