Prstni rezkarji, 16 kosov

Herko Ø25 x 55mm R4

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Hodpfx Abjd Nb A Neheh Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Stanje: zelo dobro (rabljeno), 16 end mills with indexable inserts Manufacturer: Walter Weight: 9.5 kg Hjdpfx Abedx D Tvohsh

Stanje: rabljeno, Details on request. Hodpfx Abeb E Evbjhoh

Stanje: rabljeno, Diameter: 5–20 mm Hsdpei Eg Rtsfx Abheh Length: 10–200 mm Shank: Morse taper Various drilling, milling, turning tools, and other accessories. Drill bits, taps, and milling cutters: 30 EUR/kg Other accessories: 10 EUR/kg

Stanje: novo, Leto izdelave: 2025, potovalna razdalja osi X: 1.520 mm, pomik osi Y: 3.030 mm, pomik po osi Z: 300 mm, teža obdelovanca (maks.): 10.600 kg, skupna dolžina: 10.100 mm, skupna širina: 2.500 mm, skupna višina: 4.500 mm, Maximale Bearbeitungsgröße: 3000×1500 mm Hodpev Awlqsfx Abhsh Maximale Schnittstärke: Kann Außendurchmesser von φ10–220 mm aufnehmen (Empfohlen: Rundrohr φ40–200 mm, Vierkantrohr: □40–200 mm), Gewicht 20 kg/m Rohrschneidetyp: 6 Meter automatisches Spannfutter Maximale kombinierte Geschwindigkeit: 150 m/min Beschleunigung: 2,5 G

Stanje: rabljeno, Leto izdelave: 2000, Workpiece diameter – max. 40 mm Workpiece diameter – min. 10 mm Workpiece length 200 – 640 mm Control system: PLC Siemens S5 95 U Total power requirement: 25 kW Machine weight: approx. 5 t Space requirement: approx. 8.5 x 2.8 x 2.35 m Hydraulic cutoff and double-end processing machine suitable for pre-machining of trapezoidal thread spindles as well as other round workpieces by cutting to length from bar and double-ended machining such as chamfering, facing, and drilling, with the workpiece fixed and rotating tools. Machine includes: - Base machine model TR 60/4-650, workpiece length 640 mm - Bar magazine for bar length 2 – 3.5 m - Standard version for solid material up to 40 mm diameter - Central positioning of bar feed rollers - Bar feeder unit - Standard version feed gripper - Rotary indexing table with 4 clamping stations, model TR 300.00 - 4 pcs. base jaws, width 80/140 mm, diameter 75 mm - Rotary indexing table swivels in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized saw head positioning - Automatic saw stand positioning with hydraulic clamping - Saw blade guide - Processing unit No. 1 – USP.00/M Hsdpfevp Sd Iex Abheh - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid advance 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Processing unit No. 2 – USP.00/M – UF - Speeds 360/720 rpm, kW 1.8/2.8 - Working stroke 80 mm - Rapid advance 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Thread cutting attachment for right and left-hand threads - Processing unit No. 3 – USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid advance 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Processing unit No. 4 – USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid advance 40 mm - Spindle mount ISA 40/M 16 - Discharge chute - Metric scales for all adjustment movements - Hydraulic unit with SAUER SUNDSTRAND booster pump - Accumulator - Rexroth flow control valves for processing units and saw - Coolant system with filter and tank - CALPERA coolant pump - Electrical installation in separate switch cabinet. Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine lamp - Flashing light for signaling machine stoppage - Central lubrication - Chip conveyor In 2011, the machine underwent an extensive mechanical overhaul to optimize positioning and centering accuracy (€25,000). Additionally, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly run in recent years; the total operating hours are estimated by the owner at approx. 24,000. This is a used machine; therefore, we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Stanje: rabljeno, Räummaschine Hjdpfxst Hr Dfo Abhjh

Stanje: rabljeno, Clinch Unit TOX – Pneumatic-Hydro TOX Press Hydro-pneumatic Press TOX Pressotechnik POWER PACKAGE Type: CRS 03.62 No.: 207599.2 Year of manufacture: approx. 2005 Pressing force: max. 80 kN = 8 tons Throat depth: 20 mm Installation height: 32 mm - Integrated clinching tool - Pneumatic valve for actuation - For punch joining or clinching Hodpfx Abjdz Sqqohoh - For creating a form-fitting connection between 2 sheets without piercing or heating the material - Mounted on stand - With basic electrical control and foot switch Weight: 230 kg Removed from a production line, sold without electrical control

Leto izdelave: 1999, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Hedpfer A Hcbsx Abhoh Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Leto izdelave: 1987, Stanje: rabljeno, številka stroja/vozila: 34, max. Zugkraft: 10 t max. Hub: 1000 mm Schnittgeschwindigkeit: 7.5 m/min Hedpfx Aond Dmebhoh Rücklaufgeschwindigkeit: 24 m/min Gewicht: 6,2 t Die Maschine ist für das Räumen von Rohren geeignet.