Hidravlični agregat

Herion 11,8 l/min 180 bar

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Fodjk Egrpspfx Afloft Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: novo, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special equipment included in the price: - 3 driven rollers - Digital display - Includes standard roller set for steel Description: Hydraulic/Motorized Ring Bending Machine Designed for both horizontal and vertical operation with 3 driven rollers All 3 rollers powered by motors Top roller adjustment is hydraulic Rollers are hardened Left/right operation via foot pedal Spindle diameter: 50 mm Roller diameter (top): 158 mm Roller diameter (bottom): 158 mm Speed: 4.5 m/min Motor power: 0.75 + 1.5 kW Electrical connection: 400 V Complies with CE standards Weight: 420 kg Fsdpfxsg Tzbwe Aflsft

Stanje: novo, številka stroja/vozila: Baureihe GSE / Neumaschine, Economic Granulators: This GSE series is ideal for all injection molding and blow molding operations. It is fundamentally suitable for all thin-walled plastic waste. Not only the attractive purchase price, but also the robust, split steel/welded housing, easy cleaning capability, as well as simple knife and screen changes, distinguish these granulators. The tangential housing design, in combination with V-cut rotors (except for the GSE 300/300), ensures that even bulky and large-volume materials are accepted and granulated by the rotor. Granulate Conveying: As standard, the granulators are equipped with an extraction system and bagging station. Fedpsghgbtjfx Aflsft Optionally, a collection bin for regrind is also available, which, like the extraction tray, is made from stainless materials.

Stanje: novo, OPTIMUM OPTIsaw S275N Metal Bandsaw - Display Model - Infinitely adjustable feed, swiveling ----- Technical Specifications ----- Swivel Range: 0 - 60°, Cutting Height: 150 mm, Cutting Depth: 230 mm, Blade Speed: 45 / 90 m/min, Blade Length: 2,480 mm, Motor (400 V): 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Fodpfx Afou R S Hpoleft Weight: 185 kg - new display machine -

Stanje: rabljeno, Nosilci: 2700x120x50 mm 63 kosov 2700x120x50 mm 1 kos 1800x100 mm (idealno za iverno ploščo): 1 kos Okvirji: 5200x1000x95 mm 17 kosov 4600x1000x90 mm 4 kosi 2300x1000x95 mm 2 kosa Če potrebujete regale ali dodatke v drugih sestavah ali izvedbah, nas prosim kontaktirajte. Nudimo celovit program novih in rabljenih regalov ter dodatkov in vas z veseljem podpremo pri vašem načrtovanju. Dodatna oprema, kot npr.: okviri, kotni in zaščitni elementi, zaščite proti preboju, iverne plošče, rešetke, mreže za zadnjo steno, distančniki so na voljo. Dostava: Fsdpfx Aoh Izr Ujfleft Prosimo, povprašajte po stroških prevoza z navedbo vaše poštne številke, kraja in želene količine artiklov. Druge storitve: načrtovanje, montaža/demontaža regalov, odkup/prodaja Možne so spremembe in napake v tehničnih podatkih, informacijah in cenah ter vmesna prodaja!

Stanje: rabljeno, Leto izdelave: 1982, Grinding length: 500 mm Grinding width: 225 mm Workpiece height: 400 mm Ffsdpfx Afecxxtmjlst Total power requirement: 5.5 kW Machine weight approx.: 3.4 t with NC control NC81, table toothed belt drive 100-25000 mm/min, automatic infeed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety device

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 20.000 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: GA11VSD+FF, Compressor compressed air system Ffjdsvx Nmfepfx Afljt Atlas Copco Comprising: Compressor GA18 Plus, year 2007 Compressor GA11VSD+FF, year 2017 Control unit ES 6 Buyer is responsible for professional dismantling. Forklift will be provided.

Stanje: rabljeno, Technical details: Power consumption: 350 A Total power requirement: 17.5 kVA Machine weight approx.: 64 kg Machine dimensions: 0.65 x 0.32 x 0.5 m Welding rectifier/inverter Ffsdou Nwd Dopfx Aflet MIG/MAG: 40A / 14V up to 350A / 31.5V TIG: 10A / 10V up to 350A Manual arc welding: 15A / 20.5V up to 350A / 34V Voltage U1: 380 - 415V Cooling type: F (water-cooled) Protection class: IP 23

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm Ffodpfju Dm E Hex Aflst • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: novo, številka stroja/vozila: Baureihe GSL 300 / Neumaschine, The granulators of the GSL series 300/400 to 300/800 are primarily designed for size reduction of production scrap in injection molding and blow molding applications. In addition to the key advantages of the GSL series, the slow-speed granulators GSL 300/400, GSL 300/600, and GSL 300/800 are particularly suitable for processing large-area components such as automotive door panels, bumpers, or hollow bodies. Fjdpfx Aeghgbhsfloft The "V arrangement" of the rotor blades ensures that the pre-shredded material is held at the center of the rotor. As a result, wear on the grinding chamber walls is significantly reduced when processing glass fiber-reinforced plastics. Material build-up on the chamber side walls is also prevented. Thanks to the staggered arrangement of the rotor discs, only individual knives are engaged at any one time, thereby always providing higher cutting force.