Pečica za strjevanje

HERAEUS MR 170

Stanje: pripravljen za uporabo (rabljen), Heraeus MR 170 E mufelna peč, žarilna peč 1000°C Notranje mere: 295 mm x 175 mm x 95 mm (globina x širina x višina) Vabljeni na ogled. Za vas lahko organiziramo poceni prevoz. Prejeli boste ustrezen račun. Za tuje stranke je možna tudi izdaja neto računa. Pogoj je veljavna ID za DDV. Vmesna prodaja pridržana. Obiščite našo trgovino in si oglejte tudi druge ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih lastnikov in služijo samo za identifikacijo in opis izdelkov. Rodpfx Aoynhm Hegtjt Odstopanja od tehničnih podatkov in napake v opisu so možne in pridržane.

Stanje: skoraj kot novo (rabljeno), Manufacturer: V. Randwijks Rotor diameter: 500 mm Rodpog Snt Ssfx Agtst Rotor width: 700 mm Drive: 22 kW / 1,470 rpm

Stanje: dober (rabljeno), Leto izdelave: 1990, From company closure: Mössner Rekord SSF 520 Year of manufacture: 1990 Serial no.: 27968 Infinitely variable speed from 15 to 2350 m/min 4 gearbox speeds Rjdpfx Asviym Degtet Bandsaw welding unit BSSO25 Air pump Work light Grinding wheel Table tiltable left 15° - right 45° Table size: 790 x 740 mm Vertical clearance: 390 mm / Horizontal clearance: 500 mm Machine height: 2100 mm Weight: approx. 700 kg

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 20281, Offer 23034 Redpfx Ajklxwkjgtjt Technical specifications: - Max. grinding length approx.: 350 mm - Max. grinding width: 150 mm - Max. installation height with/without magnet: 150 / 210 mm - Grinding wheel stroke approx.: 200 mm - Clamping surface: 300 x 160 mm - Magnetic clamping plate: 250 x 150 mm - Grinding wheel dimensions approx.: 200 x 80 x 78 mm - Grinding wheel speed: 2800 rpm - Swivel range of grinding arm approx.: 180° - Manual arm clamping via clamping lever - Wet grinding system - Drive: 400 V / 1.85 kW - Required floor space approx.: W 850 x H 1650 x D 800 mm - Weight approx.: 350 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: omejena funkcionalnost, premer diska: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800 x 1,500 x 2,200 mm Lapping plate diameter 525 mm Maximum lapping ring width 175 mm Maximum workpiece size 170 mm Lapping plate speed 45/70/90/140 rpm Main drive power 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with operator panel Rodpfjh Invrex Agtjt Full-featured lapping machine, conventional control

Stanje: pripravljen za uporabo (rabljen), Bitzer Compressor Rsdpfxoh Dht De Agtst Type: 60-70.2 Flow rate: 219.1 m³/h Cooling capacity: 143 kW at -5°C/40°C, 118 kW at -10°C/40°C, 77 kW at -20°C/40°C Refrigerant: R404A Stock quantity: 3 units Stock number: S 75 Condition: Used, good We have a large selection of other refrigeration equipment available: condensing units, compressors, coolers, condensers, chillers, cold rooms, as well as refrigerated and catering furnishings, and machines and equipment for restaurants and meat processing. Check our other listings or call us— not all items are listed on Machineseeker.

Stanje: rabljeno, Leto izdelave: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine, model FS 50 SA Rodpfx Ajwq Nc Njgtst Grinding area: 500 x 250 x 375 mm Vertical automatic feed Equipped with fine-pole electro-magnetic chuck Grinding wheel diameter: 300 x 50 x 76.2 mm Includes paper band filtration unit and manual dresser on top Various wheels and flanges included Weight: approx. 2,400 kg Required floor space: approx. 2,500 x 1,800 x height 2,500 mm The machine is located at our facility in 71334 Waiblingen-Beinstein and can, of course, be inspected. Please feel free to contact us.

Stanje: rabljeno, Gebruikte Copeland ZR19M3E-TWD-561 scrollcompressor voor Freon, voorzien van een kijkglas. De compressor heeft een slagvolume van 42,8 m³/h. Rsdjrlk Amspfx Agtet

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Redpoiu Smbjfx Agtjt Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 0 mm Total power requirement: 7.5 kW OFFER We can offer you – subject to prior sale and errors excepted – the following, available from stock: GEIBEL & HOTZ CNC Horizontal Surface & Profile Grinding Machine Model: FS 6-Z CNC Year of manufacture: 1996 Maximum grinding length (table longitudinal travel 660 mm): 600 mm Maximum grinding width (cross travel max. 360 mm): 0 mm Maximum grinding height under wheel: approx. 375 mm Distance table – spindle centre min / max: 140 / 525 mm Standard magnetic chuck size: 600 x 0 mm Table clamping area: 820 x 0 mm Maximum table load: 400 kg Table speed: m/min Cross movement / table stroke: 3 - 40 mm Rapid cross/vertical feed: 5 m/min Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle speeds, adjustable: 1,000 – 3,000 rpm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 15 kW – 400 V – 50 Hz Weight approx.: 2,600 kg Accessories / Special equipment: • SIEMENS CNC Control type 840 D with comprehensive GEIBEL&HOTZ grinding software, user-friendly interface, text and graphic support, easy programming even for complex grinding wheel contours and fast linking of grinding operations • All standard grinding programs and cycles such as surface and multi-surface grinding with roughing – finishing – sparking out – return, plunge grinding, automatic dressing with compensation, etc. • Electronic handwheel for 3 axes • Table movement via toothed belt drive, allowing both very high and very low table speeds, ideal for profile grinding • Dressing device with swing diamond, mounted on left side of table, with automatic dressing cycle, compensation, and for profile dressing as well • Fixed dresser with interchangeable mounting, left side of table • Mounted sine table permanent electro-magnetic chuck approx. 600 x 200 mm, fine-pole • Wet grinding unit with separate band filter coolant filtration • Separate electrical cabinet, work lamp, various accessories, operating manuals Condition: Good to very good condition! Suitable for all grinding applications! Please click here for a video of the machine: Rsdox Haryjpfx Agtet Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net – upon receipt of invoice Always a large selection of grinding machines in stock – please let us know your requirements!