Ekscentrični tisk

HEILBRONN REP 50

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et50-neu-löwa, 50m³ underground tank cistern, brand new according to DIN-EN 12285-1, Single-walled, raw interior, externally professionally insulated. Dimensions: D = 2.50 m - L = approx. 10.70 m The tank is equipped with a DN 600 manhole including dome cover, bolts, and gasket. Upon request, the tank can be fully equipped with a fire-fighting water suction connection, bringing the tank in line with DIN 14230 requirements for underground fire-fighting water tanks. Fire-fighting water suction connection / suction pipe in stainless steel V2A – as per DIN 14230 – comprising: - 1 pc. DN125 suction pipe made of stainless steel V2A, with Storz A fixed coupling and Storz A blank coupling, - 1 pc. DN100 vent pipe with hood in stainless steel V2A, - 1 pc. anti-vortex plate mounted on suction line, - 1 pc. sign "Fire Water Extraction Point", - 1 pc. dip tube with gauge rod for measuring fill level, - 1 pc. dome cover with bolts and gasket. The suction pipe can be used both as a fill and extraction pipe. All components are pre-assembled for installation – ex works – If required/desired: Installation of an above-ground fire water suction connection in accordance with DIN 14244 – Form B, Including A fixed coupling to DIN 14319 and A cover cap to DIN 14319. Housing made of cast iron – exterior coated with epoxy resin. Optional: Complete interior sandblasting and application of a potable/fire water coating. Tank ex works, loaded and ready for transport. General: Lodpfx Aod Tmaqsfrohp You will receive an invoice with shown VAT. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental units are also available! Furthermore, we purchase existing tank systems and are able to properly empty, clean, dismantle, and transport them with certified specialist company qualification in accordance with the German Water Resources Act (§ 62 WHG).

Stanje: dober (rabljeno), Leto izdelave: 2019, številka stroja/vozila: 6284, Offer 24033 Technical Data: - Tapping capacity: M 3 to M 24 - Working range (swing radius): 1800 mm - Infinitely variable speed control up to 475 rpm - Digital depth setting - Torque: 140 Nm - Quick-change tool holder size 2, dia. 31 mm - Various inserts for quick-change tool holder - Table surface: 1200 x 990 mm - Table height: 830 mm - Space required: approx. W 1250 x H 2000 x D 1000 mm Ledpfx Afort Unwjrohp - Weight: approx. 300 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.300 mm, trajanje garancije: 12 meseci, širina obdelovanca (maks.): 1.300 mm, RWT Deburring Machine – Possible Configuration Four-Station Machine: 1. Deburring with contact roller abrasive belt 2. Cup brush for oxide layer or slag removal 3. Cup brush for edge rounding 4. Finish grinding with contact roller BSM series machines can be equipped with the following work units: Abrasive belt grinding unit (R) – removes burrs projecting above the material surface, removes scale and corrosion from the surface Planetary disc brush unit (D) – rounds edges, creates radii, and removes the oxide layer from the sides after laser cutting Rotary aggregate (A) with flap brushes – deburring and edge rounding without removing protective film, surface homogenization Non-woven abrasive brush unit (B) – cleans and polishes the surface material in advance These deburring machines are used for the following applications: Deburring parts after laser cutting – edge deburring, oxide removal, and surface finishing Deburring parts after plasma cutting – slag removal, rust removal, overflow material removal, edge rounding, and surface finishing Deburring parts after punching – removal of sharp edges, edge rounding, and final surface finishing Deburring parts after waterjet cutting – deburring and edge rounding, removing traces left by waterjet cutting, and final surface finishing Deburring foil-coated stainless steel parts – deburring and edge rounding without removing the protective film Main advantages of the machine: Modular system – we design the machine precisely according to your requirements High-quality and uniform deburring of all product edges Lsdpfxeudal Do Afrohp Processing of very small workpieces using magnetic or vacuum table Very simple operation via Schneider Electric touchscreen Grinding, deburring, and finishing with a single machine Very fast tool changes and rigid machine frame Due to the wide range of possible machine configurations, we recommend personal consultation and free grinding samples at our facility, so that we can evaluate our customers’ requirements and then suggest the most suitable machine configuration for the respective production.

Stanje: novo, Sheet width: 2050 mm Sheet thickness: 3 mm Frame gap: 2100 mm Backgauge – adjustable: 600 mm Connected load: kW Lhodpofv H Dkofx Afrop Machine weight approx.: 1.1 t Dimensions (L x W x H): 2.7 x 2.1 x 1.4 m The machine operates quietly and, thanks to its geared motor with brake system, is energy efficient. Our machine is constructed as a monoblock body, welded from ST42 quality material. The machine’s blades are made from 2379 grade material, manufactured by BOHLER. These high-quality blades ensure precise cutting. Emergency stop button, foot switch, and finger protection grid are included as standard equipment. (Documentation available in English only)

Stanje: rabljeno, Table size 900 x 460 mm X/Y/Z travel – 600/400/420 mm Spindle speed 20–4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Tool changer with 32 stations Quill movement in vertical head 75 mm Swivelling vertical head +/- 90° Lodpfx Afol Dvx Eorjhp Control: Heidenhain TNC 407 Equipped with: Machine vice 19 tool holders Coolant system

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Lodpfokvnumex Afrshp Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Leto izdelave: 2002, Stanje: rabljeno, Pressure: 63 t Reach: 315 mm Stroke: 8–100 mm Stroke rate: 140 strokes/min Ram adjustment: 63 mm Table surface: 1200 x 630 mm Ram surface: 800 x 315 mm Through hole in table: Ø 110 mm Lsdpolp U D Tofx Afrohp Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight: approx. 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot control Roller block strips in table Hydraulic clamp on the ram Counterbalance cylinder Approved for manual loading operations

Stanje: rabljeno, Leto izdelave: 1969, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 250 mm Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Required space approx.: m J U N G Horizontal Precision Surface and Profile Grinding Machine Model: HF 50 RD Year of manufacture: approx. 1969 Machine No.: 4082 Maximum grinding length: 500 mm Maximum grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel: approx. 350 mm Grinding wheel dimensions: 225 x 25 x 51 mm Grinding wheel speed, stepless: 1,000 - 4,500 rpm Vertical infeed: 0.001 - 0.01 mm/stroke Grinding spindle drive, stepless: 0.5 to 1.5 kW Total drive: approx. 6 kW - 380 V – 50 Hz Lhsdpet Hwziefx Afrsp Weight: approx. 2,500 kg Accessories / Special Equipment: • This design is particularly suitable for grinding high-alloy tool steels, thanks to the stepless speed range. • Automatic infeed of the grinding slide for both surface and profile grinding tasks, with automatic infeed stop via dial gauge, plus dial indicator mount and dial gauge for height control. • Machine configurable for standard grinding method with and without infeed, with continuous cross feed or table reversal, or for plunge grinding without traverse. • Manual straight dresser mounted above the grinding wheel • Built-on permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and band filter • Separate converter cabinet for stepless speed regulation and cutting speed display • Approx. 3 flanges with and without grinding wheels, motorized rapid grinding head traverse Condition: Good – ready for demonstration under power, partially overhauled by professional company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), Knuth UFM 2 Universal Milling Machine Technical Data Manual X-axis travel: 800 mm X-axis travel: 750 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Table size: 1320x320 mm T-slots: 5x14x63 mm Feeds Y-axis feed (8 steps): 20 – 360 mm/min Z-axis feed: 600 mm/min Spindle speed (12 steps): 58 – 1800 rpm Vertical spindle taper: SK 40 Distance between spindle nose and table: 0 – 400 mm Head swivel: 45° Ledpfxenfu Rij Afrehp Horizontal spindle taper: SK 50 Drive System Main motor power: 4 kW Z-axis motor power: 0.75 kW Feed motor power: 0.55 kW Coolant pump motor: 0.09 kW Coolant pump capacity: 25 l/min Dimensions and Weight Dimensions (LxWxH): 1900x1720x1750 mm Weight: 2100 kg More items – new and used – available in our shop! International shipping costs on request!

Stanje: rabljeno, Eccentric Pressing Machine HAULICK + ROOS Type RVD 125 Double-column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column width: 900 mm Column width (lateral): 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Die height as pictured: 340 mm Lhjdpfx Aehlnzksfrop Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double-connecting rod mechanism with 4-point eccentric shaft bearing for off-center ram pressure loads - Separate electrical control cabinet - NC roller feeder EBU, width 250 mm, year of manufacture: 2003 - Separate operating console for roller feeder - Coil feed direction: left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons